Mugen MTX-5E NEW PROTOTYPE 2013
#1
Mugen MTX-5E NEW PROTOTYPE 2013
Not an onroad guy but you like to share what i found for you guys!
+ YouTube Video | |
#2
Tech Champion
Interesting...that front suspension shot looked like their nitro car so it should be nice and strong.
#3
200mm EP ? "c'est celaaa, oui "
Not sure if the guy is running foams or rubber (kind of looks like rubber but the geometry says foam , eg rear camber link).
Anyway it makes so little sense I'm thinking it's just a home made conversion.
Not sure if the guy is running foams or rubber (kind of looks like rubber but the geometry says foam , eg rear camber link).
Anyway it makes so little sense I'm thinking it's just a home made conversion.
#4
There was a bit on redrc a while back about it. Basically Pietsch just did a conversion of the nitro car to play around with in the winter.
#5
#6
Supposedly Robbie Collins MBX6-Eco short course conversion was sent to Mugen Japan to be put into production...
Might be the same deal with this.
Might be the same deal with this.
#7
#9
Is this a 190mm TC ?
#10
Tech Master
Looks very similar to the Corally C4 from the late 90s. That was 1/8th Serpent suspension mated to an electric chassis and transmission.
http://tamiyaclub.com/showroom_model...73417&sid=4672
http://tamiyaclub.com/showroom_model...73417&sid=4672
#11
#12
So it's like a regular TC, only more expensive, probably heavier, and illegal to race pretty much everywhere. Nice !
#13
#14