Who would be interesed in 1S SADDLE PACKS for their t-bar designed pan cars?
#16
Tech Addict
iTrader: (11)
I might be interested in this for my 12l3 - one of the biggest issues with using a std 3.7 or even a shorty 3.7 is that for the electronics to mount the other side you have to deal with the battery slots. But a shorty 3.7 might be interesting to look into too.
As far as the manufacture.. what about doing a "Batch" say of 25-50. My guess is the hardcase plastic - if it needs to be special manufactured(size) is the biggest issue.
James
As far as the manufacture.. what about doing a "Batch" say of 25-50. My guess is the hardcase plastic - if it needs to be special manufactured(size) is the biggest issue.
James
#18
Tech Champion
Thread Starter
Because of the weight and room? No?
#20
Most of the 2s saddle packs I've seen are 2s for each half of the saddle, run in parallel to double the capacity, not voltage. In other words, 2 2s packs. 1/12 scale runs 1s.
#21
Tech Champion
Thread Starter
I'm using 2S saddle packs that are 1S for each half of the saddle only. In 1/10 off road at least, and that's what almost all my mates run in saddles.. It might be different in on road idk
#24
yes
+ 1
#26
Tech Adept
I would like 2 packs.
#27
We will decide this week if we want to pursue bringing back our 1S saddle packs. 1/12th is a great class and would hate to see the t-bar cars become a paper weight.
#28
Tech Elite
iTrader: (4)
I have run a 1s Speedzone saddle pack back about 2 years ago in my 12L4. The pack performed great and the car ran like a champ. Was right in the mix with all the link cars. I eventually broke down and bought a link car but keep the 12L4 with my 1s saddle pack as a backup.
#29
Tech Champion
Thread Starter
We will have our answer soon
A big THANK YOU for all your feedbacks and to Speedzone too for being so receptive.
A big THANK YOU for all your feedbacks and to Speedzone too for being so receptive.
#30
Tech Champion
Thread Starter
Can anybody post a picture of his car with speedzone lipos?