Kyosho Touring Car
#1771
I believe the car is Kyosho TF-5. It was a orange,white and black car with a dodge stratus body. It was a 1/10 car with a 20 turn motor. A guy at my hobby shop has a friend that worked for rc car magazine and did a review on this car. When he was done he sent to him because they knew eachother and he put it up for sale. It wasn't even out yet and he was selling a $379 car for $200. I saw the car on display and thought it was good deal and almost bought it but I am an offroad racing fan. He later took it off the sale and kept it. Put a 19 turn motor in it to run with the 19T class.
This is no lie i sware on my grave its true and the car new car you are talking about is probably this one. You can see pictures of it on kyoshos website.
This is no lie i sware on my grave its true and the car new car you are talking about is probably this one. You can see pictures of it on kyoshos website.
#1772
#1773
Tech Lord
iTrader: (32)
I believe the car is Kyosho TF-5. It was a orange,white and black car with a dodge stratus body. It was a 1/10 car with a 20 turn motor. A guy at my hobby shop has a friend that worked for rc car magazine and did a review on this car. When he was done he sent to him because they knew eachother and he put it up for sale. It wasn't even out yet and he was selling a $379 car for $200. I saw the car on display and thought it was good deal and almost bought it but I am an offroad racing fan. He later took it off the sale and kept it. Put a 19 turn motor in it to run with the 19T class.
This is no lie i sware on my grave its true and the car new car you are talking about is probably this one. You can see pictures of it on kyoshos website.
This is no lie i sware on my grave its true and the car new car you are talking about is probably this one. You can see pictures of it on kyoshos website.
#1776
car
Welll after running the car last night for the first time , i would have to say it works really well for my first on road car . i know somebody posted it before but looking for a front steel spool or something better than the plastic one's , i had to put in the one way after i found the pipe a few times any idea's
#1778
I believe the car is Kyosho TF-5. It was a orange,white and black car with a dodge stratus body. It was a 1/10 car with a 20 turn motor. A guy at my hobby shop has a friend that worked for rc car magazine and did a review on this car. When he was done he sent to him because they knew eachother and he put it up for sale. It wasn't even out yet and he was selling a $379 car for $200. I saw the car on display and thought it was good deal and almost bought it but I am an offroad racing fan. He later took it off the sale and kept it. Put a 19 turn motor in it to run with the 19T class.
This is no lie i sware on my grave its true and the car new car you are talking about is probably this one. You can see pictures of it on kyoshos website.
This is no lie i sware on my grave its true and the car new car you are talking about is probably this one. You can see pictures of it on kyoshos website.
#1780
st
anyone with parts or car for sale lmk looking for tf-5 stallion parts
#1782
There's a rolling chassis and a conversion kit.
#1784
car
Guys here is Derek Furantani setup for High bite to medium bite asphalt...Great starting point , and pretty sure it will work for the shin car. I have used this setup for stock, and 19 turn brushless...
Front of Car
Spool or One way with AA diffs
Front block CCin , 2 mm spacer in front hidge pin, #3 spacer underneath blk
Rear block CCin , 1 mm spacer in rear hidge pin, #3 spacer underneath blk
Droop 5 with yokomo gauge
Camber 1.5 to 2 degree camber you choose, toe 0 to .5
Stock 3 hole pistons, 45wt kyosho oil, blue kyosho spring(I use Tamiya gray)
2 mm spacer in Front top camberlink, use the back camber link hole
Shock position 2nd hole from bottom
Rear of Car
Front block BBin, 2 mm spacer in front hidge pin, #3 spacer underneath blk
Rear block DD out, 1 mm spacer in rear hidge pin, #3 spacer underneath blk
Droop 4 with yokomo gauge
Camber 2 ( I look at ware of tire, I usely use 1 degree)
1 mm spacer in rear top camberlink in far back hole
stock 3 hole pistons, 40wt kyosho oil, orange kyosho spring(I use tamiya blue)
Total 3 degree toe
Shock position in middle of shock tower
AA rear diffs
We use Mazda 6 or Mazda speed 6 bodies
Tires RP30 out door or Sorex 36 with yokomo thin insert at Socal
Hopefully this will be a good starting point and I did not forget anything..
Front of Car
Spool or One way with AA diffs
Front block CCin , 2 mm spacer in front hidge pin, #3 spacer underneath blk
Rear block CCin , 1 mm spacer in rear hidge pin, #3 spacer underneath blk
Droop 5 with yokomo gauge
Camber 1.5 to 2 degree camber you choose, toe 0 to .5
Stock 3 hole pistons, 45wt kyosho oil, blue kyosho spring(I use Tamiya gray)
2 mm spacer in Front top camberlink, use the back camber link hole
Shock position 2nd hole from bottom
Rear of Car
Front block BBin, 2 mm spacer in front hidge pin, #3 spacer underneath blk
Rear block DD out, 1 mm spacer in rear hidge pin, #3 spacer underneath blk
Droop 4 with yokomo gauge
Camber 2 ( I look at ware of tire, I usely use 1 degree)
1 mm spacer in rear top camberlink in far back hole
stock 3 hole pistons, 40wt kyosho oil, orange kyosho spring(I use tamiya blue)
Total 3 degree toe
Shock position in middle of shock tower
AA rear diffs
We use Mazda 6 or Mazda speed 6 bodies
Tires RP30 out door or Sorex 36 with yokomo thin insert at Socal
Hopefully this will be a good starting point and I did not forget anything..
#1785
set up
are those the tamiya short blue springs or ?????? b main