Capricorn 190mm EP
#108
Last pictures
Hi,
Last few pictures attached, testing started. Will write later or at least as soon as possible
Last few pictures attached, testing started. Will write later or at least as soon as possible
#109
Tech Master
iTrader: (2)
Finally had some time to finish and test my TE01.
I've been very impressed by the build and overall quality, I think it's even better then the quality of the Capricorn nitro cars. All the suspension pieces have a very precise fit and move freely straight away.
I've had one and a half day of testing so far and the results have been very promising. On the third battery I was just 3/100 of my personal best which I set with the Awesomatix A700, the best carpet car if you ask me. I haven't improved my personal best yet but I don't think that will take long, probably this week. Out of the box carries a lot of corner speed, it doesn't get stuck in the corners. Thus far I only made 2 small changes compared to the standard setup, which is really good.
Tomorrow I will have another day of testing and when I'm happy with the setup I will post it.
Blitz WRX shell, feels pretty good but the LTC-R was 0,1 sec faster.
I've made pictures of every step of the build. Within the following days I will post a full build report. For those who can't wait, you can find the pictures here:
https://www.facebook.com/Capricornrc.nl?ref=hl
I've been very impressed by the build and overall quality, I think it's even better then the quality of the Capricorn nitro cars. All the suspension pieces have a very precise fit and move freely straight away.
I've had one and a half day of testing so far and the results have been very promising. On the third battery I was just 3/100 of my personal best which I set with the Awesomatix A700, the best carpet car if you ask me. I haven't improved my personal best yet but I don't think that will take long, probably this week. Out of the box carries a lot of corner speed, it doesn't get stuck in the corners. Thus far I only made 2 small changes compared to the standard setup, which is really good.
Tomorrow I will have another day of testing and when I'm happy with the setup I will post it.
Blitz WRX shell, feels pretty good but the LTC-R was 0,1 sec faster.
I've made pictures of every step of the build. Within the following days I will post a full build report. For those who can't wait, you can find the pictures here:
https://www.facebook.com/Capricornrc.nl?ref=hl
#111
Tech Adept
Hi
I know that Rc-netshop.dk will ship world-wide , contact Nikolaj and he will help you.
Have now tested 2 days and what a car. Drives super smooth and i have had some positive response from other drivers at our lokal track.
So far I had some small crash , but no parts broken , but even more importent , the car keeps driving in a straight line , not twisted or something like that.
Will do another test day to day , looking forward to a super day
Michael
I know that Rc-netshop.dk will ship world-wide , contact Nikolaj and he will help you.
Have now tested 2 days and what a car. Drives super smooth and i have had some positive response from other drivers at our lokal track.
So far I had some small crash , but no parts broken , but even more importent , the car keeps driving in a straight line , not twisted or something like that.
Will do another test day to day , looking forward to a super day
Michael
#112
Hi
I know that Rc-netshop.dk will ship world-wide , contact Nikolaj and he will help you.
Have now tested 2 days and what a car. Drives super smooth and i have had some positive response from other drivers at our lokal track.
So far I had some small crash , but no parts broken , but even more importent , the car keeps driving in a straight line , not twisted or something like that.
Will do another test day to day , looking forward to a super day
Michael
I know that Rc-netshop.dk will ship world-wide , contact Nikolaj and he will help you.
Have now tested 2 days and what a car. Drives super smooth and i have had some positive response from other drivers at our lokal track.
So far I had some small crash , but no parts broken , but even more importent , the car keeps driving in a straight line , not twisted or something like that.
Will do another test day to day , looking forward to a super day
Michael
Thanks for yesterday testing, great driving from your side...
I will post the first video's from the testing on Facebook in another post...
So everyone take a look at Michael driving the TE01 at BRC in Copenhagen, we strted out testing set-up for Super Stock and we run a 17.5T Thunder Power motor...
Enjoy
Last edited by RC-Netshop.dk; 12-02-2012 at 03:12 AM.
#113
First video`s of the TE01 in Action
Hi everybody,
Please take a look, it`s Michael Johnsen driving at BRC track in Copenhagen.
We run the car with our own set-up, will post it when we have tested a few more things...
Car runs pretty good right out of the box, it's balanced and doesn't get tweaked after a few meetings with the boards ....
You will have to have an Facebook account to watch the video`s, I'm sorry ...
Here's the link:
http://www.facebook.com/media/set/?s...4183981&type=2
We running a 17.5 Thunder Power motor....
If you have questions, please feel free to ask me or Michael Johnsen (aka Johnsen-dk)
Br,
Nikolaj
Please take a look, it`s Michael Johnsen driving at BRC track in Copenhagen.
We run the car with our own set-up, will post it when we have tested a few more things...
Car runs pretty good right out of the box, it's balanced and doesn't get tweaked after a few meetings with the boards ....
You will have to have an Facebook account to watch the video`s, I'm sorry ...
Here's the link:
http://www.facebook.com/media/set/?s...4183981&type=2
We running a 17.5 Thunder Power motor....
If you have questions, please feel free to ask me or Michael Johnsen (aka Johnsen-dk)
Br,
Nikolaj
#114
Tech Addict
We'll be supporting the car in the UK at CPD Racing, expecting first batch of kits during next week !
#116
Tech Master
iTrader: (2)
For the ones who are interested, I've uploaded the manual to my site:
http://www.dsmotorsport.nl/downloads...b-te01-manual/
I had to upload it in parts because of the maximum file size limitation.
http://www.dsmotorsport.nl/downloads...b-te01-manual/
I had to upload it in parts because of the maximum file size limitation.
#118
Tech Addict
First Run tonight with it
#119
Double post
#120
Hi all
Does anyone know if the te01 would be able to put a diff in the front ??
Thanks
Jt
Does anyone know if the te01 would be able to put a diff in the front ??
Thanks
Jt