Xray T4 '13
#1066
Tech Elite
iTrader: (44)
Be carefull.
Don't get to hung up on the length of the shocks. Just make sure the ball is not bound up as winding the shock end in too far will bind it up. Find a good position for the shock end and match the rest of the shocks to that.
Make sure the balls all move freely in the shock ends. This is very important.
Don't get to hung up on the length of the shocks. Just make sure the ball is not bound up as winding the shock end in too far will bind it up. Find a good position for the shock end and match the rest of the shocks to that.
Make sure the balls all move freely in the shock ends. This is very important.
#1067
Tech Regular
Any tips on building the shocks? The one i have built has 100% rebound. With the foam in the top or not?
#1070
Tech Elite
iTrader: (44)
I use no foam, if the caps have a vent hole putting in the foam does not allow it to vent.
When I put the bladder on, I push the piston up 75%, put the bladder on, with a 3mm ball end, I push in the center of the bladder, lightly, and then push a little more to push out oil, then put the top on.
#1071
Tech Regular
Do the caps come stock with a vent hole?
#1072
Tech Apprentice
#1073
Tech Addict
#1075
Tech Addict
Yeah, c'est la vie!!!
I'm starting building my new T4.
http://www.automodelisme.com/index.p...&topic=45531.0
In the same time , I build my new NT1 Pro 2012!!!
http://www.automodelisme.com/index.p....msg508438#new
I'm starting building my new T4.
http://www.automodelisme.com/index.p...&topic=45531.0
In the same time , I build my new NT1 Pro 2012!!!
http://www.automodelisme.com/index.p....msg508438#new
#1076
Tech Regular
Got my car finished... And its simply the best car iv ever had
#1078
Food check
Kit T4 coming today from Ashfordhobby thanks Robert
And I will see you next race MRH or The Coliseum, Racer Z
Jojo