grippgoat

iTrader: (8)

Are the shocks on the S1 the same as the R1?

-Mike

SteveM

iTrader: (165)

Threaded plastic bodies on the S1, threaded alloy shock bodies on the R1.

trickd122

iTrader: (3)

Has anyone compared the track width differences with the different suspension insert variations?

Regards

PitNamedGordie

iTrader: (8)

Jeff Jenkins has...

From what I gather it is .5mm for each dot you add/subtract. I could be wrong though...

I'm wanting to test this, if I can get to the track this weekend that is...

drsfly

Do you need a link to mapquest for directions to the track?

Maybe it is still in your gps!


So I will see you there Saturday.
And Sunday for Racing!

PitNamedGordie

iTrader: (8)

I was there a few Fridays in a row then my Tekin let out the magic smoke. Now my real car didn't start this morning. If I can get that all sorted out I'll be there tomorrow

drsfly

Well you know where to go for a car battery---- right!!!

PitNamedGordie

iTrader: (8)

yep!

toast.

iTrader: (14)

Can someone help me figure out what spur/pinion i need?
Was going to practice on a small track (TQ Racing) and owner recommended "Gearing around 4 with 17.5 motor will be a good start" but i dont see that on the chart?

tcdrvr2

iTrader: (88)

92 spur /44 pinion would be a 3.972 so pretty close or 92 spur/43 pinion 4.06 64-pitch gears.

texaspaul

iTrader: (15)

Just picked on of these up from Reflex Racing. What a great guy to deal with, Cristian helped out with info on the car. looking forward to build.

racer x 1

iTrader: (27)

Most guys there run a 96 spur and just under 4.0 for fdr

toast.

iTrader: (14)

Thanks guys ill pick up a 92 and 96 spur 64 pitch and 44 pinion - any others i should grab?

BigC123

This is what I run here at Mikes hobbyshop in Texas 96 X 46= 3.965 or 96X 45
is 4.053. The Kimbro spur gears work great in the SpecR R1

racer x 1

iTrader: (27)

Ull want to go as low as 3.5 and as high as 4.5 fdr so check for both size spur gears