Team CRC Xti 1/12th Scale!!
|
|||
#541
Tech Elite
iTrader: (44)
Ok... I have to ask... How do you remove the 113 servo saver with out it blowing apart? I have gone though a number of them then trying to remove it to make a small adjustment to center it on the servo... I'm so glad I ordered a hand full of them... I'm going thought them like skittles. How do they hold up in a crash?
#542
Tech Master
iTrader: (13)
I found the 113 fits pretty tight on the JR 3650s... I was able to get them on/off a number of times without damaging the saver or the splines, though. Just need some patience and a flat-head screwdriver to help pry it off.
On the Airtronics 94761, the 113 fits MUCH looser. Mine barely needs any tugging and it pops right off.
On the Airtronics 94761, the 113 fits MUCH looser. Mine barely needs any tugging and it pops right off.
#543
Tech Elite
iTrader: (44)
I found the 113 fits pretty tight on the JR 3650s... I was able to get them on/off a number of times without damaging the saver or the splines, though. Just need some patience and a flat-head screwdriver to help pry it off.
On the Airtronics 94761, the 113 fits MUCH looser. Mine barely needs any tugging and it pops right off.
On the Airtronics 94761, the 113 fits MUCH looser. Mine barely needs any tugging and it pops right off.
#544
Tech Elite
Join Date: Dec 2005
Location: 5280 Raceway. Denver's finest RC facility
Posts: 4,780
Use a set of body scissors. Open them up and put the spline of the servo in between like you are going to cut it off. Pry up.
Use sub trim to center your saver, not trim.
Use sub trim to center your saver, not trim.
#546
Tech Elite
Join Date: Dec 2005
Location: 5280 Raceway. Denver's finest RC facility
Posts: 4,780
See.... I'm not that bad after all.
#551
Tech Elite
iTrader: (49)
Hi guys,
First off, thanks for the support and thanks for your patience. We were caught off guard a bit on the popularity of the Xti. Worldwide the car is in high demand and we are cranking up production as hard as we can.
We did recently send a bunch of cars to Horizon, so if your dealer has a backorder in with Horizon, they should receive their order soon. Also, keep checking with horizonhobby.com as well as some of the large mail order shops, as again we filled their backorders as well. While we have not fully caught up, we made a big dent last week. More on the way soon, CNC's are running and we are packing.
Andrew - thanks for the support here on R/C Tech giving a hand to some of the guys. Appreciate your assistance. Also, be aware that GP does not carry the CRC line, it must have been Horizon online that you were looking at.
Thanks,
CRC
First off, thanks for the support and thanks for your patience. We were caught off guard a bit on the popularity of the Xti. Worldwide the car is in high demand and we are cranking up production as hard as we can.
We did recently send a bunch of cars to Horizon, so if your dealer has a backorder in with Horizon, they should receive their order soon. Also, keep checking with horizonhobby.com as well as some of the large mail order shops, as again we filled their backorders as well. While we have not fully caught up, we made a big dent last week. More on the way soon, CNC's are running and we are packing.
Andrew - thanks for the support here on R/C Tech giving a hand to some of the guys. Appreciate your assistance. Also, be aware that GP does not carry the CRC line, it must have been Horizon online that you were looking at.
Thanks,
CRC
AWD