YOKOMO Touring Car BD-7
#7291
Tech Champion
iTrader: (42)
Learning a new car...BD7 2016
I randomly skimmed this thread, but looking for more a quick recap on some items.
I thought I read that Xray c-hub work. Is that the case and are they a direct fit? Does anything else cross over?
Which are the actual stock arms...
Yokomo (YOKBD-008FG)
Yokomo Lightweight Graphite Front Suspension Arm Set $14.49
Yokomo (YOKBD-008FS)
Yokomo Front Suspension Arm (2) (Short) $10.49
Yokomo (YOKBD-008RG1)
Yokomo Lightweight Graphite Rear Suspension Arm (39.5mm) $14.49
Yokomo (YOKBD-008RS)
Yokomo Rear Suspension Arm (2) (Short)
Always been a fan, but don't know much about the car and picked up a 2016.
I randomly skimmed this thread, but looking for more a quick recap on some items.
I thought I read that Xray c-hub work. Is that the case and are they a direct fit? Does anything else cross over?
Which are the actual stock arms...
Yokomo (YOKBD-008FG)
Yokomo Lightweight Graphite Front Suspension Arm Set $14.49
Yokomo (YOKBD-008FS)
Yokomo Front Suspension Arm (2) (Short) $10.49
Yokomo (YOKBD-008RG1)
Yokomo Lightweight Graphite Rear Suspension Arm (39.5mm) $14.49
Yokomo (YOKBD-008RS)
Yokomo Rear Suspension Arm (2) (Short)
Always been a fan, but don't know much about the car and picked up a 2016.
#7293
nexxus,
i have no idea if xray c hubs fit. i doubt that seriously.
you want the 008rg1 arms....but the new car has new recipe material and description and they are interchangeable.
i dont asssssume you need any till windy opens,
i have some if that is not the case .
great car. get alum chassis.
it will turn so hard you will scare yourself.
also look at the set up sheets on petit rc... the wide ones especially.
d
i have no idea if xray c hubs fit. i doubt that seriously.
you want the 008rg1 arms....but the new car has new recipe material and description and they are interchangeable.
i dont asssssume you need any till windy opens,
i have some if that is not the case .
great car. get alum chassis.
it will turn so hard you will scare yourself.
also look at the set up sheets on petit rc... the wide ones especially.
d
#7294
Tech Champion
iTrader: (42)
nexxus,
i have no idea if xray c hubs fit. i doubt that seriously.
you want the 008rg1 arms....but the new car has new recipe material and description and they are interchangeable.
i dont asssssume you need any till windy opens,
i have some if that is not the case .
great car. get alum chassis.
it will turn so hard you will scare yourself.
also look at the set up sheets on petit rc... the wide ones especially.
d
i have no idea if xray c hubs fit. i doubt that seriously.
you want the 008rg1 arms....but the new car has new recipe material and description and they are interchangeable.
i dont asssssume you need any till windy opens,
i have some if that is not the case .
great car. get alum chassis.
it will turn so hard you will scare yourself.
also look at the set up sheets on petit rc... the wide ones especially.
d
I'll have the carbon and aluminum chassis.
#7295
i think Fred K. is still running mod with one but not sure.
i have a few iterations now ..most of which saw little to no track time.
that is going to change.
famous last wds.
i have a few iterations now ..most of which saw little to no track time.
that is going to change.
famous last wds.
#7297
carpet
#7298
Tech Initiate
#7299
Could somebody tell me if metal gears of yz2 diff could put on bd7 diffs?
Best regards
Best regards
#7300
Help with out corner enroll
Hi guys
My new BD7 2016 black series enrolls out of corner, my actual setup is the asphalt basic setup I found in petitrc but rear springs are silver and shock oil is 450.
I'm new in yokomo's world comming from a tamiya trf417. I'm impressed with the quality. Wow this car is a superb engineering works.
What do you think can be the problem?
Thanks!
My new BD7 2016 black series enrolls out of corner, my actual setup is the asphalt basic setup I found in petitrc but rear springs are silver and shock oil is 450.
I'm new in yokomo's world comming from a tamiya trf417. I'm impressed with the quality. Wow this car is a superb engineering works.
What do you think can be the problem?
Thanks!
#7302
Got my 16 Bd7 a few months ago and I've been super pleased with it on carpet and even a few asphalt races in between. Fully equipped ready to race with a 20Gram weight I am sitting at 1350 on the nose with my Protoform gen 2 maza 6 body (reinforced).
Only weight reduction would be alum rear shafts, Orca low pro battery. I run 17.5 (24k) and the yok carbon floating servo. My main question is regarding the alum chassis difference in weight. Does anyone know how much the alum chassis weighs in grams? If you have one loaded on your car I would love to know the weight ready to race.
I guess I am trying to figure out if I will be close to 1350-1360 with the alum chassis, and no additional brass weight. I have blitz tsx body that is 20 grams lighter that I can make up some difference on or get some titanium screws to help out with the alum chassis.
Thanks in advance
Only weight reduction would be alum rear shafts, Orca low pro battery. I run 17.5 (24k) and the yok carbon floating servo. My main question is regarding the alum chassis difference in weight. Does anyone know how much the alum chassis weighs in grams? If you have one loaded on your car I would love to know the weight ready to race.
I guess I am trying to figure out if I will be close to 1350-1360 with the alum chassis, and no additional brass weight. I have blitz tsx body that is 20 grams lighter that I can make up some difference on or get some titanium screws to help out with the alum chassis.
Thanks in advance
#7303
Could somebody tell if Y2-503GM and B2-503GM are the similar thing?