Hot Bodies Cyclone
04-30-2010, 03:04 PM
Tech Regular
iTrader: (5)
mostly med-to-large parking lot tracks...we do have a real sweet setup in Jackson, NJ (http://www.jacksonrcracing.com/) - nice permanent facility with CURBS 
on my 'standard' cyclone i AM running a lipo battery tray - mainly because i never really ran a 5000mah pack
on my cyclone TC, i am using an exotek chassis with the weighted battery retainers
on my 'standard' cyclone i AM running a lipo battery tray - mainly because i never really ran a 5000mah pack
on my cyclone TC, i am using an exotek chassis with the weighted battery retainers
May just need to test with weight until then.
Thanks, Rob.......
04-30-2010, 03:09 PM
Tech Regular
iTrader: (5)
04-30-2010, 05:26 PM
hi guys in running on a large asphalt here is a link http://www.mikes-hobbyshop.com/OnRoadTrack.html
anyway im going to run 13.5 on a TC not the older version so im looking to get some tips on gearing can any of you guys help me out with a starting point before i go buy a bunch of gears/pinions. anything will help hopefully some of you pro guys can hook a brotha up
thanks in advance
anyway im going to run 13.5 on a TC not the older version so im looking to get some tips on gearing can any of you guys help me out with a starting point before i go buy a bunch of gears/pinions. anything will help hopefully some of you pro guys can hook a brotha up
thanks in advance
04-30-2010, 06:42 PM
Way too many varibles to just throw out a gear ratio for a 13.5. Include some info and someone will probably be able to help you out.
What 13.5?
What motor timing?
What ESC?
What ESC settings?
All these will affect optimum gearing significantly.
What 13.5?
What motor timing?
What ESC?
What ESC settings?
All these will affect optimum gearing significantly.
04-30-2010, 10:08 PM
pinion
So a solid pinion gear to start at would be a 26T with the variables being im running a SP17.5 with the new 2.1 pro stock speedo, track is midsize in FL. Let me know thankssss
04-30-2010, 10:45 PM
Tech Apprentice
iTrader: (3)
i havnt been on here much lately but has any had problems with the pins falling out of there DCJ's? mine are pretty much brand new only a couple of races old had one decent crash when my receiver died and now one of the pins on both sides have fallen out how are they fixed in? and how can i replace them?
how are they fixed in? and how can i replace them?
05-01-2010, 04:22 AM
Tech Master
05-01-2010, 10:00 AM
thanks what pinion and spur are you running??? im runnung 4.5 FDR but its SLOW ( with a Orion Race Spec ESC )im also gonna be using a Speed Passion GT2.0 ESC i dont have it yet so programing yet also running a Orion Pro Stock 13.5 motor
05-01-2010, 01:09 PM
Just about all the fast guys in my local area are now running or have been running 6 degree caster blocks on their cars. AE, Xray, and Schumacher. I found the part number for them (HP73519) but it doesn't register on the HB website. I have one pair coming to me for testing this weekend (thanks Korey) but where can we get more should I like them?
05-01-2010, 01:16 PM
Just about all the fast guys in my local area are now running or have been running 6 degree caster blocks on their cars. AE, Xray, and Schumacher. I found the part number for them (HP73519) but it doesn't register on the HB website. I have one pair coming to me for testing this weekend (thanks Korey) but where can we get more should I like them?
05-01-2010, 01:20 PM
05-01-2010, 02:58 PM
Tech Master
I'm actually 4.6, just checked. I'm on the older 16T pulley, with a 69 spur and 36 pinion. It is a little soft into and through the corners, but pulls hard coming out which is how I like it
05-01-2010, 03:08 PM
05-01-2010, 03:52 PM
05-01-2010, 04:23 PM