Hot Bodies Cyclone
if you are going to run as a begining yes its a superb great kit for starting, beacause you can adjust everything like the WCE edition and the only difference between the WCE edition and the cyclone S id that the WCE has more aloy the the S version .Yes i would recomend it for a start
can you up grade it to the WCE? where is the cheapest place to get the kit?
Tech Elite
iTrader: (28)
yeah you can eventually upgrade it over to the WCE but dont buy the S thinking its more cost effective to just upgrade as fast as you can. See how competitive you are with it first. If you're gonna be racing on asphalt, i suggest getting an upgraded center pulley, the Ver.3 spool for the front, tires that work best on your local track, good electronics, and metal outdrives (i hear the stock ones wear out quick if you run anything hotter than a 27t). Im sure you'll be able to be plenty competitive at that point. Move on with any upgrades you want from there (i would suggest the shocks first i think).
i know that i get most of my parts like a new chassis from www.rcmarket.co.hk
wich is a very good site.
First and foremost upgrade to the s should be the carbon c-hubs they are extremly weak on the stock car. If you do pick one up I have all the silver carbon fiber pieces except the chassis for sale
..TC shipment fresh off the boat
..TC shipment fresh off the boat (plane...)
Woo finally, early October instead of the supposed early September.
Tech Elite
iTrader: (63)
Does anyone make steel rear outdrives for the cyclone wce?
Or any that do not wear as fast as the alloy.
Running Modified
Or any that do not wear as fast as the alloy.
Running Modified
Tech Elite
iTrader: (59)
yeah!!!!!!!!!!!!!! they are here.
Hi guys,
I would like to let you know that we have the TC kits back in stock.
Get yours before they are gone!!
I would like to let you know that we have the TC kits back in stock.
Get yours before they are gone!!
Tech Elite
iTrader: (11)
But new shocks look BLING!
Hey guys the new carpet track at nexus racing is opening this saturday. Its a completely new track and is running CRC fastrack carpet. Anybody have a rubber tire carpet setup for this or at least a spring setup. I just took my asphalt setup shortened the links by a hole and added some more rear droop. So far the car is ok but a little tail happy
Tech Adept
I need a setup for carpet rubber, I have the first kit the black ver and didn't get to it until now I tried to do a search and didn't find a setup for carpet can someone give me a setup or a link thank you.
Tech Champion
iTrader: (32)
Tech Elite
iTrader: (14)
the alloy ones are pretty darn strong, unless your blades are shot and the pin passes through...
nothing better to recommend. Try using a bit of tamiya anti wear grease on the blades.
Paul