Hot Bodies Cyclone
02-25-2008, 10:12 AM
Im gonna assume it was the crappy bumper that was on the car. I'll make sure I switch it to the stock one for tomorrow's race until my parma bumper arrives.
My foam moorspeed used to break c-hubs/steering knuckles all the time too before i switched to aluminum. Maybe I got a brittle batch of graphite.
I would love to post pics of the steering knuckle that shattered in 3 peices which is never seen.
My foam moorspeed used to break c-hubs/steering knuckles all the time too before i switched to aluminum. Maybe I got a brittle batch of graphite.
I would love to post pics of the steering knuckle that shattered in 3 peices which is never seen.
02-25-2008, 12:09 PM
Ive only broken one knuckle, I switched to T2 knuckles and they are great. Comming from an original jrxs this car is indestructable.
02-25-2008, 12:32 PM
02-25-2008, 01:13 PM
Yep they are a perfect fit just used the ackerman hole closest to the hub itself on the T2 knuckles and everything is the same.
02-25-2008, 01:25 PM
02-25-2008, 02:25 PM
yeah those look stronger but they cost just the same as the 3racing alloy ones.
02-25-2008, 04:23 PM
Id take xray plastic over any alu part on my car TBH... While I hate breaking, I dont want any alu, just need to fix my driving
02-26-2008, 07:51 AM
whats wrong with the 3racing stuff? my car is decked out in it
02-26-2008, 09:38 AM
the whole front end of a T2 will fit on a cyclone arms, c hubs, nuckles, etc
02-26-2008, 11:46 AM
02-26-2008, 12:38 PM
Tech Fanatic
iTrader: (1)
Yeah guys be the first on your block to have a Cyclaray
Xraysteve was beat by a Cyclone LOL ,I think he was 1 lap down but I did not see the print out.
Xraysteve was beat by a Cyclone LOL ,I think he was 1 lap down but I did not see the print out.
02-26-2008, 05:25 PM
3 racing alu is cheap, and bends easily....
The good suff is square, or hpi
The good suff is square, or hpi
02-26-2008, 09:14 PM
oh man I haven't checked any of my 3racing alloy yet but the car drives like a dream! so im just assuming nothing is bent? have you bent any 3racing aluminum?
02-26-2008, 09:17 PM
I have learned the hard way with my bash cars... I dont want to try it out on my racer.... But if it works for you, then cool!
02-26-2008, 09:21 PM
wait what? so have you bent anythign from 3racing or just assuming