Hot Bodies Cyclone
marcosj they borrowed the arm so they could make fun of them. point and laugh at the fragile things. lazer guy tomorrow you will see which car is superior.
xray=
cyclone=
xray=
cyclone=
Super Moderator
iTrader: (239)
Tech Addict
iTrader: (1)
All i have to say is T2,007 and now 008 Why is it that Xray have to keep coming up with a new car Same old Cyclone Hara, Moore Speed same car i look at it likes this u can pick a car to take a crash or pick a car thats wins WC
Tech Master
iTrader: (23)
Wow, we got some passionate racers here!
In my area Xray is the dominant car and the 008 works well.
I originally bought the Cyclone just cause I didn't wanna run what everybody else was. Then I found out just how capable the Cyclone is on the track. It's a great feeling to put that car on the grid in a sea of Xrays!
BTW-the last time I ran my 008, I broke a front arm. just lightly clipped an inside corner board. snapped like a dry twig!
In my area Xray is the dominant car and the 008 works well.
I originally bought the Cyclone just cause I didn't wanna run what everybody else was. Then I found out just how capable the Cyclone is on the track. It's a great feeling to put that car on the grid in a sea of Xrays!
BTW-the last time I ran my 008, I broke a front arm. just lightly clipped an inside corner board. snapped like a dry twig!
Tech Elite
iTrader: (138)
I wooped on xray and corally's tonight with my moorespeed cyclone! 2nd place B-main! Sweeeet!
Anyways I have searched for 1.7 hours tonight for a P-dub bumper for this car...not 1 store has it in stock. help.
Anyways I have searched for 1.7 hours tonight for a P-dub bumper for this car...not 1 store has it in stock. help.
Tech Master
iTrader: (23)
I hate to say it but the T2 hard bumper (Xray or Parma) will work. Just gotta open up the post holes a little.
Tech Elite
iTrader: (138)
oh wow, does the bumper need to be cut down in the front?
Tech Master
iTrader: (23)
I usually shape them a little for a better fit on the body but, never had to actually cut them down.
Tech Master
iTrader: (23)
Right, it would rub if you're running rubber tire. You'd have to shape it a little to clear.
Tech Champion
iTrader: (32)
ran the car for the first time today. While the two month lay off had me a little rusty all I can say is damn the car was stuck. It had good steering and plenty of rear traction. I was scared of pushing the car since I was driving Scotty's and not my own. I will be running my own car next weekend for a little practice. Gotta shake the rust off and get ready for the Speedworld cup in July. At Speedworld I will mostly be running my 4.5 and at Norcal a 3.5. I ran a 4.5 today and it felt just fine. Marcos J has landed in Sacramento......LOL
The steering knuckles do seem to be a bit on the weak side though.
The steering knuckles do seem to be a bit on the weak side though.
Tech Elite
iTrader: (138)
I find that the C-hubs on this car are weak as f---. Once i switched to aluminum c-hubs and steering blocks the only parts that break are arms and bent hinge pins
I hope you guys are right about the T2 parma bumper fitting I ordered it!
I hope you guys are right about the T2 parma bumper fitting I ordered it!
ran the car for the first time today. While the two month lay off had me a little rusty all I can say is damn the car was stuck. It had good steering and plenty of rear traction. I was scared of pushing the car since I was driving Scotty's and not my own. I will be running my own car next weekend for a little practice. Gotta shake the rust off and get ready for the Speedworld cup in July. At Speedworld I will mostly be running my 4.5 and at Norcal a 3.5. I ran a 4.5 today and it felt just fine. Marcos J has landed in Sacramento......LOL
The steering knuckles do seem to be a bit on the weak side though.
The steering knuckles do seem to be a bit on the weak side though.
You liking the cyclone so far?