Hot Bodies Cyclone
#6842
Tech Apprentice
Hi,
could you guys also tell me which pivot blocks come standard with the Moorespeed WCE Cyclone? is it the 2.5 degree block front, and 3.0 degree rear like the Hara and Surikarn versions?
Thanks
could you guys also tell me which pivot blocks come standard with the Moorespeed WCE Cyclone? is it the 2.5 degree block front, and 3.0 degree rear like the Hara and Surikarn versions?
Thanks
#6843
carpet
#6845
Tech Apprentice
Originally Posted by 2-Bad
Yepp!!!
Cheers
#6846
Tech Adept
hi guys,
just picked up a mint hara cyclone and it looks amazing. trying to sort out my electrics out. the problem i have is that my ariel wire is running very close to the belt!! too close actually. any of you guys got pics of how you mounted your receiver next to the servo and how close your ariel wire comes to the belt?
i have a futaba PCM receiver if that help size wise.
any help would be appreciated!
just picked up a mint hara cyclone and it looks amazing. trying to sort out my electrics out. the problem i have is that my ariel wire is running very close to the belt!! too close actually. any of you guys got pics of how you mounted your receiver next to the servo and how close your ariel wire comes to the belt?
i have a futaba PCM receiver if that help size wise.
any help would be appreciated!
#6847
Originally Posted by chris_blakey
hi guys,
just picked up a mint hara cyclone and it looks amazing. trying to sort out my electrics out. the problem i have is that my ariel wire is running very close to the belt!! too close actually. any of you guys got pics of how you mounted your receiver next to the servo and how close your ariel wire comes to the belt?
i have a futaba PCM receiver if that help size wise.
any help would be appreciated!
just picked up a mint hara cyclone and it looks amazing. trying to sort out my electrics out. the problem i have is that my ariel wire is running very close to the belt!! too close actually. any of you guys got pics of how you mounted your receiver next to the servo and how close your ariel wire comes to the belt?
i have a futaba PCM receiver if that help size wise.
any help would be appreciated!
Roughly how big is your reciever?
#6848
Tech Adept
1.7 x 1.1 x 0.4 in
R113iP - 3-Channel PCM Micro
R113iP - 3-Channel PCM Micro
#6849
I just had a brainwave...well sort of lol
Where abouts does the ariel come out of the reciever? On the side, if so does it come out on the 'inside' of the car (ie on the side closest to the belt?), If it does then maybe try routing it underneath the belt and put a bit of battery tape over it, in effect taping it to the chassis. Or would this cause major glitching?
Where abouts does the ariel come out of the reciever? On the side, if so does it come out on the 'inside' of the car (ie on the side closest to the belt?), If it does then maybe try routing it underneath the belt and put a bit of battery tape over it, in effect taping it to the chassis. Or would this cause major glitching?
#6851
Tech Adept
Originally Posted by raving-monkey
I just had a brainwave...well sort of lol
Where abouts does the ariel come out of the reciever? On the side, if so does it come out on the 'inside' of the car (ie on the side closest to the belt?), If it does then maybe try routing it underneath the belt and put a bit of battery tape over it, in effect taping it to the chassis. Or would this cause major glitching?
Where abouts does the ariel come out of the reciever? On the side, if so does it come out on the 'inside' of the car (ie on the side closest to the belt?), If it does then maybe try routing it underneath the belt and put a bit of battery tape over it, in effect taping it to the chassis. Or would this cause major glitching?
will post pics tomorrow
#6852
Tech Elite
iTrader: (32)
You should be able to adjust and rotate the antenna tube holder to position it away from the belt a little bit. I run the dsm receiver too and its kinda close but I have never had a rubbing issue.
Would someone with a spare topdeck mind tracing it for me and scanning it? Im trying to piece my car back together for this weekend till I have time to order a topdeck lol. A friend of mine ordered one for me but I cant reach him to get it.
Would someone with a spare topdeck mind tracing it for me and scanning it? Im trying to piece my car back together for this weekend till I have time to order a topdeck lol. A friend of mine ordered one for me but I cant reach him to get it.
#6853
Originally Posted by raving-monkey
I just had a brainwave...well sort of lol
Where abouts does the ariel come out of the reciever? On the side, if so does it come out on the 'inside' of the car (ie on the side closest to the belt?), If it does then maybe try routing it underneath the belt and put a bit of battery tape over it, in effect taping it to the chassis. Or would this cause major glitching?
Where abouts does the ariel come out of the reciever? On the side, if so does it come out on the 'inside' of the car (ie on the side closest to the belt?), If it does then maybe try routing it underneath the belt and put a bit of battery tape over it, in effect taping it to the chassis. Or would this cause major glitching?
how do matt me old mucker
#6854
Tech Elite
iTrader: (9)
Originally Posted by lawtonlosi
You should be able to adjust and rotate the antenna tube holder to position it away from the belt a little bit. I run the dsm receiver too and its kinda close but I have never had a rubbing issue.
Would someone with a spare topdeck mind tracing it for me and scanning it? Im trying to piece my car back together for this weekend till I have time to order a topdeck lol. A friend of mine ordered one for me but I cant reach him to get it.
Would someone with a spare topdeck mind tracing it for me and scanning it? Im trying to piece my car back together for this weekend till I have time to order a topdeck lol. A friend of mine ordered one for me but I cant reach him to get it.
#6855
Originally Posted by pug 205 gti
youve just had a brain wave i will ring the fire department hehe
how do matt me old mucker
how do matt me old mucker
Infact, you are posting in the cyclone thread...is that a hint?
Oh btw, whos the chick in the pic?