TFR

iTrader: (11)

GOOT from Japan, very good brand iron. I have the exact same one myself and the tip is alway very nice.

wagonman72

Part number 61398 is the ver.2 style requiring the ver.2 drive cups part number 61397. These drive cups are standard on the Hara and Surikarn editions. The ver.2 parts are all identified by a grove cut into them, both the "bones" and the drive cups. There is also a ver.2 black aluminum replacement "bone" available, they come 1 per package and the part number is 61396.

AdrianM

iTrader: (4)

Monty had a pic of Rommel in his command center.

Ballsie

What's the model number?

tim fry

iTrader: (1)

Just getting my Cyclone ready for the weekend and I've just been weighing it and its only 1400 gramms. To get it to legal race weight I need to add 100 gramms minimum but there isn't enough room to stick that many weights on.
Anyone got any suggestions?

Tim

rc-zombies

iTrader: (9)

there's plenty of room to add weights...look at Hara's car from Last weekend's nats... he's added weights to all 4 corners of the chassis. the lower right corner is under the diode. and also down the center line of the chassis.

Dan415ms

Are the diffs the same front and rear on the cyclone? I need a front diff.....

dway100

iTrader: (7)

Yes they are.

rc-zombies

iTrader: (9)

forgot to ask Hara while he was here...
but anyone know which Straight Capacitor he's using the S4 or V8?
This seams to fit the chassis better.
I want to get away from using the large bulky barrel type.

Guo Chean

iTrader: (4)

Ramon is V8. S4 is bigger than V8 alot

rc-zombies

iTrader: (9)

Thanks!

Guo Chean

iTrader: (4)

you going to order it and used?

rc-zombies

iTrader: (9)

yup ..
+it looks cleaner on the car..

Ballsie

Does Hara run the Diode on his Twister 2.1?

rc-zombies

iTrader: (9)

yes...he runs the MM 55amp diode..you can see it on the one of the recent pics posted.. it's glued on the right side of the motor on the chassis.