Hot Bodies Cyclone
04-27-2009, 09:18 AM
Tech Regular
04-27-2009, 09:53 AM
Yes !
04-27-2009, 04:38 PM
Can anyone tell me if the TC Upper deck will fit the WCE Cyclone.
I like the fact that it has counter sinked front holes (Less to unscrew if tweaked)
I like the fact that it has counter sinked front holes (Less to unscrew if tweaked)
04-27-2009, 05:47 PM
04-27-2009, 09:40 PM
Yup, drops right on!
04-27-2009, 09:52 PM
my rear shocks keeps on leaking from the top of the cylinder, anyone know what could be causing this? ive already checked it a number of times but the cap is tight. could it be the bladder? its been like this since i built the car.
Thanks.
Thanks.
04-27-2009, 10:21 PM
04-27-2009, 10:28 PM
your bladder is worn out/bad. Replace the bladders with fresh ones.
04-27-2009, 10:32 PM
Nope, I haven't run RCGT yet. If I were going to start somewhere, I would try Hara's Reedy race setup that is posted on the website with these changes:
-Stand up the rear shock one hole, and move to the middle hole on the rear arm.
-run 2mm of uptravel in the front, and 3mm in the back
That should get you in the ballpark. The car should develop a good amount of grip to counteract the lack of grip the tires may produce. Give it a shot, then make some changes to suit your conditions.
-Korey
-Stand up the rear shock one hole, and move to the middle hole on the rear arm.
-run 2mm of uptravel in the front, and 3mm in the back
That should get you in the ballpark. The car should develop a good amount of grip to counteract the lack of grip the tires may produce. Give it a shot, then make some changes to suit your conditions.
-Korey
04-27-2009, 10:40 PM
Nope, I haven't run RCGT yet. If I were going to start somewhere, I would try Hara's Reedy race setup that is posted on the website with these changes:
-Stand up the rear shock one hole, and move to the middle hole on the rear arm.
-run 2mm of uptravel in the front, and 3mm in the back
That should get you in the ballpark. The car should develop a good amount of grip to counteract the lack of grip the tires may produce. Give it a shot, then make some changes to suit your conditions.
-Korey
-Stand up the rear shock one hole, and move to the middle hole on the rear arm.
-run 2mm of uptravel in the front, and 3mm in the back
That should get you in the ballpark. The car should develop a good amount of grip to counteract the lack of grip the tires may produce. Give it a shot, then make some changes to suit your conditions.
-Korey
04-27-2009, 11:13 PM
04-28-2009, 05:40 AM
Any of you have any ideas about the new Cyclone Ronald Volker have been driving? Is it still in prototype stage? Very Tamiya like though... the steering, the top deck.
04-28-2009, 08:51 AM
04-28-2009, 09:11 AM
Tech Master
iTrader: (19)
04-28-2009, 09:56 AM