can someone help with my esc
 

on i have a tekin g10 esc with a maxtec aftershock motor on my losi xxxs and a and about 3 or 4 days ago it ran fine no problems and today i charged the battery and hooked it up and my esc wont come on is it burn up?
and if it is how can it be burn up without playing with it?

Is it possible that it just died when you plugged it back in. Could you have switched the positive and negative lines even for a moment? If you cannot get it fixed I do have a Tekin G11 I could sell you...

Bad connectors, hanging brushes?

Does the steering servo works or it's all dead?

the survo dose not work when its pluged into the esc and the motor works when i hook it to a battery the esc wont come on is it dead?

If it's not coming on when powered up it's time to check a few things. What battery are you hooking it up to? What type of connectors?

didn't the G10 have a "solder fuse"? have you checked that?

ok o put new wires on the tekin g-10 and it lights up and works with my survo but when i hook up a motor it just keeps running and makes the esc hot do i have the wires on the motor backwerds or have the moter mounted in the wrong place on the power wire it seems like motor is hooked straight to the battery

Do you have the manual ? If not ..here ya go.
http://www.teamtekin.com/manuals/g10manu.pdf

I ran all the Tekins from G9 to G12. They're usually bulletproof. Still have a couple somewhere. Good Luck