1LikesXray T1FK05
03-24-2005, 05:26 PM
#950
Originally posted by John Tag
Ill be at Horsham saturday, I have a package to deliver to Jim
See ya there.
Ill be at Horsham saturday, I have a package to deliver to Jim
See ya there.
Hey, wait a minute! Would that package contain some high voltage items?
03-24-2005, 05:28 PM
#951
Tech Fanatic
iTrader: (14)
Re: Part # 307454 Pivot Ball
Originally posted by komkit
In the bag # 05 - Front Suspension
Am I suppose to get these??? It doesn't look right????
These were only two in the bag.
In the bag # 05 - Front Suspension
Am I suppose to get these??? It doesn't look right????
These were only two in the bag.
yes you were suppose to get them.....on the front shock tower you are suppose to slide a 3 x 10 screw through the shock tower then screw a M3 nut onto the screw then screw that ball on the same screw against the M3 nuts..
hope that helps....
03-24-2005, 05:32 PM
#952
Originally posted by ALBERTO
i just finished building my fk05 and i gotta say this sucker is perfectly balanced even wit the batteries on one side. The only thing i dont really like is the 48 pitch spur gear. What 64 pitch spur are you guys using. I know the largest is 116 
i just finished building my fk05 and i gotta say this sucker is perfectly balanced even wit the batteries on one side. The only thing i dont really like is the 48 pitch spur gear. What 64 pitch spur are you guys using. I know the largest is 116
03-24-2005, 05:37 PM
#953
quinn, did u get one yet??? i got mine. i gotta buy some new spurs.-lil' B
03-24-2005, 05:39 PM
#954
Re: Re: Part # 307454 Pivot Ball
Originally posted by A.c racing
yes you were suppose to get them.....on the front shock tower you are suppose to slide a 3 x 10 screw through the shock tower then screw a M3 nut onto the screw then screw that ball on the same screw against the M3 nuts..
hope that helps....
yes you were suppose to get them.....on the front shock tower you are suppose to slide a 3 x 10 screw through the shock tower then screw a M3 nut onto the screw then screw that ball on the same screw against the M3 nuts..
hope that helps....
But these two (in the photos)... I think it suppose to be installed on the caster block for the camber linkages. The part number for these two I think it was 307454 Pivot Ball 5.0 double bevel shoulders.
03-24-2005, 05:50 PM
#955
Just got mine today from SpeetechRc!
Cant wait to build. Ditto on the spur question as I will be using 64 pitch.
Any of you have info on the Belt Tensioner option?
This is my first belt as I have been only into shaft.
What are the advantages of using this? What does it do?
Cant wait to build. Ditto on the spur question as I will be using 64 pitch.
Any of you have info on the Belt Tensioner option?
This is my first belt as I have been only into shaft.
What are the advantages of using this? What does it do?
03-24-2005, 05:53 PM
#956
Tech Fanatic
iTrader: (14)
Originally posted by scoobydo
Just got mine today from SpeetechRc!
Cant wait to build. Ditto on the spur question as I will be using 64 pitch.
Any of you have info on the Belt Tensioner option?
This is my first belt as I have been only into shaft.
What are the advantages of using this? What does it do?
Just got mine today from SpeetechRc!
Cant wait to build. Ditto on the spur question as I will be using 64 pitch.
Any of you have info on the Belt Tensioner option?
This is my first belt as I have been only into shaft.
What are the advantages of using this? What does it do?
it mostly makes sure the belts wont skip and to make it maybe smoother mostly....
03-24-2005, 05:56 PM
#958
Tech Fanatic
iTrader: (14)
Originally posted by 710baby
Speaking with Mr Burch from X Ray @ the Nats I think you will be able to use the 100 tooth spur I think it's the biggest that will fit.
Anyone has a suggestion on what oil to use outdoors
Speaking with Mr Burch from X Ray @ the Nats I think you will be able to use the 100 tooth spur I think it's the biggest that will fit.
Anyone has a suggestion on what oil to use outdoors
xray 30 wt works good.....i use ae 50wt all around...i feel like that works for me the best but also people do use ae 40 wt all around also...
03-24-2005, 05:57 PM
#959
112 matches up pretty well with 84 tooth spur in 48 pitch
116 / 87
www.teamxray.com has outdoor setups on the car. Look in the Forum.
116 / 87
www.teamxray.com has outdoor setups on the car. Look in the Forum.
03-24-2005, 05:58 PM
#960
So with 84/16 I get the rollout I am looking for. 22.88mm FDR 8.925
If I wanted to use 64 pitch I would have to use 100/19 to get 22.82 FDR 8.947
Is that right or does one have to use a different equation when formulating 48 pitch as opposed to 64 pitch?
Do you just use the same equation?
If I wanted to use 64 pitch I would have to use 100/19 to get 22.82 FDR 8.947
Is that right or does one have to use a different equation when formulating 48 pitch as opposed to 64 pitch?
Do you just use the same equation?
