1LikesXray T1FK05
11-26-2005, 10:07 PM
#4741
You tell um Pezz Dag Burnit!
11-26-2005, 10:31 PM
#4742
FYI,
One way Carpet/Foam setup UPDATE
"...simply put, the car holds the line mid corner better and steers more consistently all around..."
One way Carpet/Foam setup UPDATE
"...simply put, the car holds the line mid corner better and steers more consistently all around..."
11-26-2005, 10:36 PM
#4743
Originally Posted by rpoage
If you are looking at some of the team set-up sheets and you see 3.0mm it's because a lot of the team guys use the full ball cup from the EVO-2 and they have a built in 2.0mm(apx) before adding a shim.
11-27-2005, 10:12 AM
#4744
Help with assembly
Hey, I was wondering if someone could help me out here. I am assembling my T1FK'05 and have found that the belt always wants to ride to the far left hand side of the front diff gear. This puts it very close to the steering post that goes from the lower chassis to the upper deck. It's not touching when I rotate the drive train by hand but it's REALLY close. I am using a wide upper deck and the 3MM chassis (I don't know if this matters). Is this normal? Is there a way to adjust where the belt rides on the gears? Any help would be greatly appreciated.
Scott
Scott
11-27-2005, 10:17 AM
#4745
Tech Fanatic
make 1005 sure your belt tensioners are the same and not making the diff out of line
11-27-2005, 03:50 PM
#4747
Tech Regular
Let's start the process of elimination...
What country are you in?
What country are you in?
11-27-2005, 03:57 PM
#4748
Originally Posted by TraceRacing
Let's start the process of elimination...
What country are you in?
What country are you in?
11-27-2005, 04:41 PM
#4751
Originally Posted by rushrush1
Sorry US
RC america...www.rcamerica.com
Dinball.......www.rcmart.com
heres 3
11-27-2005, 05:19 PM
#4754
Originally Posted by kerry
check out www.stormerhobbies.com
