1LikesXray T1FK05
09-20-2005, 01:49 PM
#3676
Originally Posted by motorhead
ok guys im brain dead i have a new xray and i have it pertty dam
fast /now im getting ready for carpet and i have stock chasses
will that work ant it 2.5 mm i did get the new top deck wide
but my rear foam tires dont fit do i were do i get adaptors
or somthing to keep them from rubing the shocks
fast /now im getting ready for carpet and i have stock chasses
will that work ant it 2.5 mm i did get the new top deck wide
but my rear foam tires dont fit do i were do i get adaptors
or somthing to keep them from rubing the shocks
Either use the inner hole in the rear arm or you have to cut away at the arm so the shock fits. It says that in the manual and it also shows a picture.
09-20-2005, 01:50 PM
#3677
Tech Fanatic
it not hitting the arm its hitting shock cup and bottom of the shock
09-20-2005, 01:51 PM
#3678
Tech Fanatic
thanks guys
09-20-2005, 02:18 PM
#3680
Tech Fanatic
thanks tag i should just call you more often your a big help
only if i could get my motors like yours mine have power
but not like yous keep up the good work...
only if i could get my motors like yours mine have power
but not like yous keep up the good work...
09-20-2005, 02:20 PM
#3681
Tech Fanatic
let me say this my stocks are ripers but i have a hard time with c2 s i think
they just suck.
they just suck.
09-20-2005, 03:09 PM
#3683
Tech Fanatic
well i did do all of that and i havent ran them yet just dynoed them
numbers ant all that great
i cut them down about 2.60 mm sould i go smaller lol
numbers ant all that great
i cut them down about 2.60 mm sould i go smaller lol
09-20-2005, 06:54 PM
#3684
Originally Posted by gee-dub
i ran the plastic ones for 2-3 race days before upgradig to aluminum (pure bling). i cannot feel a difference either static or on the track. supposedly xray is working on new shocks, can't wait to see what they come up with, hope they keep the external adjustability feature (now if we could only get some offroad 1/10 ep manufacturers to get with the times).
09-20-2005, 07:12 PM
#3685
Originally Posted by motorhead
ok guys im brain dead i have a new xray and i have it pertty dam
fast /now im getting ready for carpet and i have stock chasses
will that work ant it 2.5 mm i did get the new top deck wide
but my rear foam tires dont fit do i were do i get adaptors
or somthing to keep them from rubing the shocks
fast /now im getting ready for carpet and i have stock chasses
will that work ant it 2.5 mm i did get the new top deck wide
but my rear foam tires dont fit do i were do i get adaptors
or somthing to keep them from rubing the shocks
09-20-2005, 08:12 PM
#3686
motorhead
Last edited by THeGame; 09-20-2005 at 08:37 PM.
09-21-2005, 12:39 AM
#3687
Originally Posted by bigdog
Roger-were did you get the alum shock bodies from I would like to get some for my car.
09-21-2005, 09:27 PM
#3688
I was never big on gearing. I usually just experiment with diffrent pinion sizes untill the gearing is just right. Nice punch and decent top speed.
Anyway I was on gearchart.com and put in my info FK'05, Spur 116, Pinion 31 and it said my ratio was I think like 6.36. What does this mean? And how do people use this gear ratio calculator to there advantage?
Someone please clue me in..
Anyway I was on gearchart.com and put in my info FK'05, Spur 116, Pinion 31 and it said my ratio was I think like 6.36. What does this mean? And how do people use this gear ratio calculator to there advantage?
Someone please clue me in..
09-22-2005, 06:14 AM
#3690
Where do you guys get your parts for this car?
