HarshGuy

iTrader: (6)

They rock!!!!

Eric Gebhard

Are the thrust bearings you're talking about the Losi style bearings on the front page of your web site?

MartynD

yes

Eric Gebhard

Sweet, I'll have to order some today.

dgullickson

iTrader: (45)

Yes I origionally got them as a replacement for Losi vehicles and now I am finding out they fit more than Losi's


They are 3x8 thrust bearings.

Jimmy Morris

iTrader: (9)

What belt tention adjustment notch thinger do u guys suggest I run if I am running stock?? Thanks.

MartynD

I run one notch looser than the starting setting suggested in the manual, with both stock and 19T

Jimmy Morris

iTrader: (9)

Thanks alot.

Michal101

iTrader: (13)

Jimbo,

I run the front as stated in the manual and I run the rear as loose as the adjustment will allow. It seemed as though the rear belt was just too tight for stock racing.

Mike

Jimmy Morris

iTrader: (9)

Alright cool, thanks for the help, guys.

=MisFitz= NuKe

On the issue of belt tension:

I have the front set on the most loose setting possible (the notch that has a big gap before it) and my front belt is still actually a little tight compared to my FK04. Any help will be appreciated.

Thanks,
Mike

skinart76

iTrader: (12)

I just bought the diff. rebuilt kit from Corally as suggested by Steve @ Speedtech, fits perfectly in there, and by the way it looks, I'm almost positive it's the same thing from the original Xray T1. Bombproof!

sonic31

iTrader: (6)

i drove my xray at my club race this sunday and damn that thing rocked. everyone who could did a 14.8 second lap i was able to do a 14.5 first time out. very impressed with the car and i did change the thrust bearing assembly to a losi one and the diff was flawless. thanks for all the info on these forums

rcfreak24

i am lost . never ran touring cars before only offroad and i do not understand the roll out and gear charts that much . what size spur and pinion combos can you run in the xray with a epic roar stock . the rpm numbers on the yellow sticker are 23,000 something if this helps and the track size is medium with a few technical sections with a full staightaway so it still needs topend speed . 64 pitch or 48 pitch is fine because i'm pretty clueless at this point . oh and the tires will start out at around 2.25

dr_hfuhuhurr

iTrader: (93)

Which track are you running at?

At Platinum Hobbies in Columbus, we were running the following:

1.01" for the Monster Stock
.98" for the Epic

My Online Rollout calculator

PM me your e-mail address and I can send you my excel version.