scoobydo

iTrader: (1)

I saw those, they have them for the T1 Factory.
Are all the bearing sizes the same from the T104 to the 05?
Thats the only thing that stopped me from buying them.

NismoSkyline17

Yup just built a FK05 for a friend and used BOCA bearings.

S-T-R-l-K-E-R

yup i am going to pull out my acer's from my 04 and will be chuckin them into my 05 this afternoon!!!!

B4

iTrader: (1)

Hi All,

I'm having an issue with the Spur gears. I have used the car at three different venues and each time I have had to replace the spur because it has damage. I previously used a Xray T1 Evo2 and the only time i changed the spur was for rollout purposes.

I think it may be sucking grit up through the hole under the spur so in my last race today I covered it with some tape. Whilst this didn't tell me about the durability of this mod it had no adverse effects.

Is there another brand of spur that is better in 48p. The kimbroughs are to wide, well that look to wide to me.

GMartinez

iTrader: (91)

you can try 64 pitch 116 tooth is the biggest you can fit by precision.

S-T-R-l-K-E-R

YES kimbroughs are W I D E but if you align your bulkheads and motormounts properly you might just get away with it with no binds.

my fav spur is made by speedmind. its great for xray!!!

HarshGuy

iTrader: (6)

All except the layshaft ones, the kit comes with a 5x9 & a 6x10 (I didn't realize that it was 2 diff sizes on the 04) ...so if you want to do the layshaft you gotta get an extra 5x9 (ordere that last night ...free shipping on all his bearings right now). Oh it also doesn't come with bearings for the steering servo, but I don't think it ever did (on the 04 or others, I don't remember having them for the Losi XXX-S kit I got either).

ChrisP

iTrader: (11)

Do you have a URL or part # tocheck out the speedmind spurs?

HarshGuy

iTrader: (6)

I just rebuilt my diffs with the axiom motors thrust bearings ...and OMG ...the diffs are smoother than Paris Hilton's pink little bottom after her weekly Brazilian Bikini wax!!!

dr_hfuhuhurr

iTrader: (93)

mmmm...thrust bearings...

MartynD

I also have some thrust bearings from Axiom on the way... wish they would hurry up and arrive already!!

dgullickson

iTrader: (45)

What you think of those thrusts I sent you?

MartynD

They haven't arrived yet Dave

dgullickson

iTrader: (45)

Yours should be there anyday. I sent out same day.

dgullickson

iTrader: (45)

Might take a little longer due to customs. They are worth the wait - trust me! I just got another 500 in so if anybody need some they our on our homepage to order - www.axiommotors.com