Exotek F1R
#2178
Tech Adept
-a bearing set
-spur gear
-differential balls
-diff rings
-steering tie rods
-front springs
-rear bulkhead plate (wing mount)
-rear axle height adjusters (Tamiya #58258)
Also, the bearing that comes with the differential housing should be replaced with a thrust bearing.
Since you are purchasing everything separately, I would replace the F104 diff housing (54148) and carbon shaft (54162) with Tamiya #84380. It includes updates of the previous 2 parts and it places the spur gear closer to the centerline of the car, and it also comes with the correct differential rings. The bearing that is supplied with it however should still also be replaced with a thrust bearing.
#2179
Regional Moderator
iTrader: (1)
Thanks!!, Seems like that diff kit is outta stock. Gotta see if my LHS have them or not. Im going to be using the Exotek front suspension kit with the spring dampers so front springs is included in that kit.
I forgot to mention I have F1 spare parts at home so bearings spur gear, tie rods, diff balls are covered. Thanks for reminding me. The rear wing mount and height adjusters I do need to get. Thanks again
I forgot to mention I have F1 spare parts at home so bearings spur gear, tie rods, diff balls are covered. Thanks for reminding me. The rear wing mount and height adjusters I do need to get. Thanks again
#2180
Tech Adept
Thanks!!, Seems like that diff kit is outta stock. Gotta see if my LHS have them or not. Im going to be using the Exotek front suspension kit with the spring dampers so front springs is included in that kit.
I forgot to mention I have F1 spare parts at home so bearings spur gear, tie rods, diff balls are covered. Thanks for reminding me. The rear wing mount and height adjusters I do need to get. Thanks again
I forgot to mention I have F1 spare parts at home so bearings spur gear, tie rods, diff balls are covered. Thanks for reminding me. The rear wing mount and height adjusters I do need to get. Thanks again
I forgeot you were going with the Exotek front suspension. I'm still using the F104 front suspension on mine.
#2181
Tech Champion
iTrader: (15)
You are missing:
I would replace the F104 diff housing (54148) and carbon shaft (54162) with Tamiya #84380. It includes updates of the previous 2 parts and it places the spur gear closer to the centerline of the car, and it also comes with the correct differential rings. The bearing that is supplied with it however should still also be replaced with a thrust bearing.
I would replace the F104 diff housing (54148) and carbon shaft (54162) with Tamiya #84380. It includes updates of the previous 2 parts and it places the spur gear closer to the centerline of the car, and it also comes with the correct differential rings. The bearing that is supplied with it however should still also be replaced with a thrust bearing.
#2182
What size thrust bearing is needed for the diff housing (part number)?
#2183
#2184
Tech Adept
#2186
Tech Master
#2189
Tech Fanatic
iTrader: (13)
http://www.tqrcracing.com/shop/produ....asp?p_id=2006
Includes a set of ride height adjusters as well as a spur gear adapter/spacer.
Includes a set of ride height adjusters as well as a spur gear adapter/spacer.
#2190
Regional Moderator
iTrader: (1)
http://www.tqrcracing.com/shop/produ....asp?p_id=2006
Includes a set of ride height adjusters as well as a spur gear adapter/spacer.
Includes a set of ride height adjusters as well as a spur gear adapter/spacer.