Gearing Pro Stock ETS
I will be driving the combination AE TC6, Speed Passion 13,5T V3 and CIRTIX Stock (Pro stock ETS Races).
Now I would like to buy some different pinion/gear and I have no clue in which range of Gearing to look!? Something between 4 and 5.5 or so? Thanks for any suggestions! |
that seems a little low, around 6ish for 13.5t, I run 7.50ish for 10.5t, you will have to get the 80t spur gear probably too.
|
Originally Posted by olly986
(Post 9830403)
that seems a little low, around 6ish for 13.5t, I run 7.50ish for 10.5t, you will have to get the 80t spur gear probably too.
|
Yup go for the 4.0 to 5.0.
If your running indoor on a short tech track you need the higher FDR. On the big outdoortrack in the Netherlands they run 4.0 Not raced at a ETS event but been to some of the Dutch tracks and know what they drive there with the Cirtix SP V3 combo. regards Roy |
Indoor ets 4,5 for pro stock
|
Hy,
like Ronald told ..max gearing is 4,5 allowed !! last year I used 4,7 cause it was better over 5 minutes kind regards Tom |
Just choose here - Gears TC6 , like they have said pay attention to max gearing allowed, but i would say for 48dp, 72/32 looks perfect. Hope this helps.
|
Thanks for all your input! This helps a lot!
|
All times are GMT -7. It is currently 10:14 PM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.