1LikesXray T3 2012
07-28-2013, 12:24 PM
#4126
I personally removed that screw long ago on my 17.5 stock sedan. Yes, more flex. I also removed two of the six screws holdin. The rear part of the top deck on, again, more flex.
08-05-2013, 10:22 AM
#4128
What's a good FDR to start out with for running Mod with the 2011 car? I'm going to be running the Tekin Gen2 4T motor and was told a FDR of 8 is a good start.
08-05-2013, 10:31 AM
#4129
08-05-2013, 11:11 AM
#4130
Thanks Troy. I'll try it out tomorrow.
08-05-2013, 07:23 PM
#4131
if I remember correctly, were people removing the screw that connects the motor bulkhead and the motor bulkhead holder? it is the counter sunk head screw that is on the motor side of the bulkhead.
this gives the car more rear flex, correct?
were people removing the screw for the stock class, or is it wise to do it in 13.5 or in mod class.
I have a 4.5 in the car now, w/ 48 pitch gears. i'm kinda of thinking w/ 48p gears, the extra flex would be OK.
I thought I would ask before I tested.
thanks for any input.
this gives the car more rear flex, correct?
were people removing the screw for the stock class, or is it wise to do it in 13.5 or in mod class.
I have a 4.5 in the car now, w/ 48 pitch gears. i'm kinda of thinking w/ 48p gears, the extra flex would be OK.
I thought I would ask before I tested.
thanks for any input.
08-07-2013, 08:51 PM
#4134
Tech Apprentice
Wow indeed, I just bought one of these a couple months ago. I am kind of in shock they discontinued it.
08-08-2013, 12:25 AM
#4135
Tech Addict
if you want flexy, perhaps a T3R chassis plate. I have one & man is it flexi , its frp? , not carbon. It'll fit the T3 original .
08-08-2013, 05:44 AM
#4136
Question . I just picked up a used 2012 that's really nice actually . but it has some silver aluminum shock bodies that r made the same way the plastic shocks r molded . uses the plastic lower cap and has the rim under top cap . anyone know anything about these? Don't think they r Xray . problem I ha e with them is the lower cap keeps coming loose . I put some shogoo on it to keep it from doing it anymore but seems like a bandaid .
08-08-2013, 06:46 AM
#4137
Question . I just picked up a used 2012 that's really nice actually . but it has some silver aluminum shock bodies that r made the same way the plastic shocks r molded . uses the plastic lower cap and has the rim under top cap . anyone know anything about these? Don't think they r Xray . problem I ha e with them is the lower cap keeps coming loose . I put some shogoo on it to keep it from doing it anymore but seems like a bandaid .
08-08-2013, 10:00 AM
#4138
I was looking for more or less a brand name for these shock bodies that r installed now . not looking to replace them at all . been building Xray & TOP shocks for 6+ yrs I haven't found them hard to build since DSD made bladders / learning to drill a hole in cap and remove foam
Will take a picture tonight tho
Will take a picture tonight tho
08-08-2013, 06:33 PM
#4140
I was looking for more or less a brand name for these shock bodies that r installed now . not looking to replace them at all . been building Xray & TOP shocks for 6+ yrs I haven't found them hard to build since DSD made bladders / learning to drill a hole in cap and remove foam
Will take a picture tonight tho
Will take a picture tonight tho
