1LikesXray T3 2012
02-03-2012, 09:30 AM
#1396
Tech Adept
Originally Posted by Skiddins
Do you mean the side to side movement at the actual mounts on the bulkheads?
Mine have very little play at that point.
Remember to disconnect the ends of the bars from the 'ball ends' and links to check that they are just loose enough to drop under their own weight.
Skiddins
Mine have very little play at that point.
Remember to disconnect the ends of the bars from the 'ball ends' and links to check that they are just loose enough to drop under their own weight.
Skiddins
My movement in the front rollbar is actually forward and back rather than side to side within the mounts. This seems to be creating the slop in the rollbar.
02-03-2012, 09:37 AM
#1397
Where the bar attaches to the bulkheads, I have always tightened the set screws to the point where the bar can still move side to side but not [up and down or in and out]. I believe one of the Xray setup books said this was the proper way to do it...
02-03-2012, 10:16 AM
#1398
T3 2012 for sale
I have a one run T3 2012 for sale here.
Car is gone, thanks.
Car is gone, thanks.
Last edited by Johnny Wishbone; 02-07-2012 at 06:24 PM.
02-04-2012, 09:21 AM
#1399
Tech Initiate
Chassis flex question.
Hello,
I bought T3'12 from one of Polish competitor.
He run this model in modified class.
Chassis was exchange by M.Hudy to get more flex.
Picture:
Whats your opinion?
Should i get original one?
I bought T3'12 from one of Polish competitor.
He run this model in modified class.
Chassis was exchange by M.Hudy to get more flex.
Picture:
Whats your opinion?
Should i get original one?
02-04-2012, 11:00 PM
#1400
Originally Posted by farm
Hello,
I bought T3'12 from one of Polish competitor.
He run this model in modified class.
Chassis was exchange by M.Hudy to get more flex.
Picture:
Attachment 873055
Whats your opinion?
Should i get original one?
I bought T3'12 from one of Polish competitor.
He run this model in modified class.
Chassis was exchange by M.Hudy to get more flex.
Picture:
Attachment 873055
Whats your opinion?
Should i get original one?
If it is really a chassis from Martin Hudy it must be a prototype. I wonder how someone can sell it...
02-05-2012, 12:59 AM
#1401
Tech Initiate
I wonder how someone can sell it...
The guy from who i bought T3, switch to TRF because of discount shutdown from polish TX distributor.
02-05-2012, 02:42 AM
#1402
That looks like the new 2.0mm chassis, they were available to drivers at the last ETS race before they were officially released. If you are running on carpet or low grip asphalt then I would give it a try first, it is also good on ultra high grip surfaces. I myself would try it and if you don't like it keep it as a tuning option.
02-05-2012, 07:09 AM
#1403
Tech Adept
Hello,
Where to find a compelte titanium screw set for this car ?
Thanks
Where to find a compelte titanium screw set for this car ?
Thanks
02-05-2012, 08:49 AM
#1404
Tech Initiate
Chassis flex question.
Its 2,5mm one, the cut of 2mm is same like 2,5 mm.
Thanks for reply. will test it first.
Thanks for reply. will test it first.
02-06-2012, 12:56 PM
#1406
Anybody know where i can get the xray blue pit towel and hudy plier set......a place that has it in stock
02-07-2012, 04:20 PM
#1407
Screws
Anyone have a cheaper source for these type of screws?
http://www.amainhobbies.com/product_...ad-Hex-Screw-8
http://www.amainhobbies.com/product_...ad-Hex-Screw-8
02-07-2012, 04:23 PM
#1408
Originally Posted by haywood
Anyone have a cheaper source for these type of screws?
http://www.amainhobbies.com/product_...ad-Hex-Screw-8
http://www.amainhobbies.com/product_...ad-Hex-Screw-8
http://www.ebay.com/itm/Tuneup-R-C-B...item2ebb37e947
02-07-2012, 05:25 PM
#1409
Originally Posted by haywood
Anyone have a cheaper source for these type of screws?
http://www.amainhobbies.com/product_...ad-Hex-Screw-8
http://www.amainhobbies.com/product_...ad-Hex-Screw-8
02-07-2012, 07:35 PM
#1410
Tech Adept
When are ECS shafts going to be available again? anyone using the Spec-R 50mm shafts on carpet?
