1LikesXray T3 2012
03-15-2012, 03:50 AM
#1846
Tech Regular
Originally Posted by Skiddins
I noticed the Exotek T3'11 chassis (which I just removed) is narrower along each side than the kit '12 chassis.
Despite the extra cutouts the current '12 chassis feels almost identical when flexing it in my hands to the Exotek 11 chassis.
Skiddins
Skiddins
Despite the extra cutouts the current '12 chassis feels almost identical when flexing it in my hands to the Exotek 11 chassis.
Skiddins
Skiddins
03-15-2012, 03:58 AM
#1847
Originally Posted by Mb3195
The Exotek is a stiffer carbon than the Xray. The top deck is what seems to generate the most flex. If you've got a spare one kicking, try getting the dremel to it!
Already have a 1.6mm on back order.
The Exotek is 2.3mm compared with Xray's 2.5mm
03-15-2012, 03:05 PM
#1848
Originally Posted by Skiddins
The 2mm is for arm sweep, not on the shock.
I also started with middle hole front links and went to shorter, which helped.
I also started with middle hole front links and went to shorter, which helped.
03-15-2012, 03:19 PM
#1849
Tech Adept
Shock spacing
Hey,
Could someone please explain the different handling characteristics between adding a 1mm spacer between the front shock and tower and also adding a 1mm spacer between the front shock and tower but also running a 1mm spacer at the bottom on the wishbone?
I know both of these changes calm the front end down but im assuming in different ways?
Could someone please explain the different handling characteristics between adding a 1mm spacer between the front shock and tower and also adding a 1mm spacer between the front shock and tower but also running a 1mm spacer at the bottom on the wishbone?
I know both of these changes calm the front end down but im assuming in different ways?
03-15-2012, 06:48 PM
#1851
Originally Posted by Bigz84
What's the diff running sweep or just adding toe out?
Originally Posted by defcone
I've yet to notice any difference between 0 and a little bit of arm sweep.
03-16-2012, 12:23 PM
#1857
Anyone know where I can find the servo wire crimping tool to shorten the wires?
03-16-2012, 12:30 PM
#1860
Originally Posted by DOTMAN
speedtechrc sells it and servo connectors and pins
