Steel Dogbone upgrade question...
#1
Steel Dogbone upgrade question...
I'm having a slight problem with my stock nylon dogbones popping out from time to time (HPI E10) when I barely bump other cars during races.
Will the Universal Drive Shaft upgrade to steel dogbones help with this issue?
Do they stay in place better than the stock ones?
Thanks up front!
Will the Universal Drive Shaft upgrade to steel dogbones help with this issue?
Do they stay in place better than the stock ones?
Thanks up front!
#2
I'm having a slight problem with my stock nylon dogbones popping out from time to time (HPI E10) when I barely bump other cars during races.
Will the Universal Drive Shaft upgrade to steel dogbones help with this issue?
Do they stay in place better than the stock ones?
Thanks up front!
Will the Universal Drive Shaft upgrade to steel dogbones help with this issue?
Do they stay in place better than the stock ones?
Thanks up front!
Also, check the ball cups, they sound like the might be loose on the ball studs.
If that's the case, new parts may be in order.
Last edited by Marv; 10-15-2012 at 11:35 AM.
#3
Thanks! Ill put in an order for a set in the front. Haven't had trouble with the rear ones yet.
#4
A quick fix for loose ball cups = The EASIEST FIX METHOD = Punch out 5/16” diameter disks (or cut 5/16” pieces) of a Zip Lock Bag.
Install one disk (or piece) centered over each ball studs.
Carry spares = nothing lasts forever.
Install one disk (or piece) centered over each ball studs.
Carry spares = nothing lasts forever.