Tamiya 1/12 R/C RM-01 "Racing Master"
#317
#321
Updated list of Hop-Ups from Tamiyausa...
54334 RC RM01 HBR Sponge Tire
54335 RC RM01 HBR Sponge Tire
54337 RC RM01 Alum Damper V Parts
54341 RC RM01 Alum Pitch Damper Se
54342 RC RM01 Alum Roll Damper Set
54351 RC Carbon Damper Mount Plate
84285 RC RM01 Wheel Set (Fluorescent Red)
84286 RC RM01 Wheel Set (Fluorescent yellow)
54352 RC Roll Spring Set
54353 RC Carbon Rr Body Mount Plat
54354 RC Alum Type 380 Motor Adapt
54355 RC Titanium Coated King Pin
54356 RC Aluminum Motor Mount (front/ left side and rear are aluminum)
54357 RC Adjustable Metal Upright (You can adjust from inline to trailing axle set up) You can also choose from 3 different Ackerman settings.
54359 RC RM01 Pitch Spring Set
http://www.tamiyausa.com/product/rcp...=desc&offset=1
--------------------------------------------------------------------------
First full raceday with the car at TQ.
Did a little tweaking and tuning.
The RM is now within .1s of track record
And that's still on kit tires.
54334 RC RM01 HBR Sponge Tire
54335 RC RM01 HBR Sponge Tire
54337 RC RM01 Alum Damper V Parts
54341 RC RM01 Alum Pitch Damper Se
54342 RC RM01 Alum Roll Damper Set
54351 RC Carbon Damper Mount Plate
84285 RC RM01 Wheel Set (Fluorescent Red)
84286 RC RM01 Wheel Set (Fluorescent yellow)
54352 RC Roll Spring Set
54353 RC Carbon Rr Body Mount Plat
54354 RC Alum Type 380 Motor Adapt
54355 RC Titanium Coated King Pin
54356 RC Aluminum Motor Mount (front/ left side and rear are aluminum)
54357 RC Adjustable Metal Upright (You can adjust from inline to trailing axle set up) You can also choose from 3 different Ackerman settings.
54359 RC RM01 Pitch Spring Set
http://www.tamiyausa.com/product/rcp...=desc&offset=1
--------------------------------------------------------------------------
First full raceday with the car at TQ.
Did a little tweaking and tuning.
The RM is now within .1s of track record
And that's still on kit tires.
#322
Are all hopups legal at tcs races?
#324
Tech Fanatic
iTrader: (3)
Do you think this is leading to the separate development of a high level tamiya 12th say that Mark would race at worlds?
Or will they sell conversions to make this a worlds level car?
This car is sure making a lot of people happy regardless
Or will they sell conversions to make this a worlds level car?
This car is sure making a lot of people happy regardless
Last edited by Infinite 12th; 01-30-2012 at 01:29 PM.
#326
foam on pavement is going to be interesting
#328
Tech Elite
iTrader: (49)
Updated list of Hop-Ups from Tamiyausa...
54334 RC RM01 HBR Sponge Tire
54335 RC RM01 HBR Sponge Tire
54337 RC RM01 Alum Damper V Parts
54341 RC RM01 Alum Pitch Damper Se
54342 RC RM01 Alum Roll Damper Set
54351 RC Carbon Damper Mount Plate
84285 RC RM01 Wheel Set (Fluorescent Red)
84286 RC RM01 Wheel Set (Fluorescent yellow)
54352 RC Roll Spring Set
54353 RC Carbon Rr Body Mount Plat
54354 RC Alum Type 380 Motor Adapt
54355 RC Titanium Coated King Pin
54356 RC Aluminum Motor Mount (front/ left side and rear are aluminum)
54357 RC Adjustable Metal Upright (You can adjust from inline to trailing axle set up) You can also choose from 3 different Ackerman settings.
54359 RC RM01 Pitch Spring Set
http://www.tamiyausa.com/product/rcp...=desc&offset=1
--------------------------------------------------------------------------
First full raceday with the car at TQ.
Did a little tweaking and tuning.
The RM is now within .1s of track record
And that's still on kit tires.
54334 RC RM01 HBR Sponge Tire
54335 RC RM01 HBR Sponge Tire
54337 RC RM01 Alum Damper V Parts
54341 RC RM01 Alum Pitch Damper Se
54342 RC RM01 Alum Roll Damper Set
54351 RC Carbon Damper Mount Plate
84285 RC RM01 Wheel Set (Fluorescent Red)
84286 RC RM01 Wheel Set (Fluorescent yellow)
54352 RC Roll Spring Set
54353 RC Carbon Rr Body Mount Plat
54354 RC Alum Type 380 Motor Adapt
54355 RC Titanium Coated King Pin
54356 RC Aluminum Motor Mount (front/ left side and rear are aluminum)
54357 RC Adjustable Metal Upright (You can adjust from inline to trailing axle set up) You can also choose from 3 different Ackerman settings.
54359 RC RM01 Pitch Spring Set
http://www.tamiyausa.com/product/rcp...=desc&offset=1
--------------------------------------------------------------------------
First full raceday with the car at TQ.
Did a little tweaking and tuning.
The RM is now within .1s of track record
And that's still on kit tires.
#329
With kit tires, the RM was super easy to drive at Tamiya HQ track, and that's a track that is notoriously loose with foam tires.
This would clean up some pinions in your pit box!http://genesisrcraceway.com/pinion%20holder.html
#330
NEWSFLASH!
After further review (in my best NFL voice), the bearing of choice is right there in our cars!
For Tamiya fans it's a 1060 and for the rest of you it's a 10mm x 6mm. It's the axle bearing on this car!
It takes only the tiniest bit of love with a body reamer to pop it into the spur (can almost force it in) as the difference is about .010" which is exactly 2 natural blonde pussy hairs.
YR4Dudedude gets credit for inspiring me to go check it out.
Rockstar this one is (Yoda voice).
After further review (in my best NFL voice), the bearing of choice is right there in our cars!
For Tamiya fans it's a 1060 and for the rest of you it's a 10mm x 6mm. It's the axle bearing on this car!
It takes only the tiniest bit of love with a body reamer to pop it into the spur (can almost force it in) as the difference is about .010" which is exactly 2 natural blonde pussy hairs.
YR4Dudedude gets credit for inspiring me to go check it out.
Rockstar this one is (Yoda voice).