Mi4cxl

In England I can assure you Rc racing makes you a whole less attractive when you first tell a woman it's one of your hobbies haha

CraigM

iTrader: (34)

http://www.redrc.net/2013/05/jconcep...-timing-cover/

mxgregg

iTrader: (32)

how's the Mach 2 4 .5 turn for modified touring car racing?

RCvetran

mach 2 motors how do they compare to the old motors. Rollouts settings still the same.I run 13.5 and 10.5 .
13.5 is in blinky 1/12th scale and 10.5 both blinky and boosted in WGT10..
In a nut shell is it worth making the switch from the old motors to the new.

Dirt_Burner

iTrader: (10)

I'm just getting into racing and built a Losi 22 buggy with orion vortex pro speedo and the Mach 2 13.5 motor. Running a 26T pinion. Any suggestions for settings with this combo?

I started with a b4.1 rtr and the reedy motor included in that kit seemed to be quite a bit faster...

luda

iTrader: (6)

Hi! Just wanted to know if anyone had advice on a suitable FDR for a mach2 13.5 on a track that has a long straight? The class is a boosted class and I am running the HW V3.1 ESC.

Thanks!

Yogi-

I'm having trouble with a 21.5 not working. You have to turn the motor to get it going. Sometimes it will start other times u need to give it help. I haven't cooked it that I can tell.

wingracer

iTrader: (24)

Usually that is sensor wire or the sensor itself.

AdrianM

iTrader: (4)

+1

Try a new sensor wire.

JustWill75

I have a Mach2 17.5 and a LRP FLOW WORKS in my TC6.1 running blinky the track I race on is 70'x48' carpet on-road with good traction and very technical infield. What is a good starting point for timing and FDR? How would you set the Flow to work best with Mach2 in this type of track condition?

With a track the size of mine what temps should I be seeing?

The reason I ask is because I'm the only mach2 on the track and everyone else is talking about 120's. I had a really bad race night with my car and was told that maybe I should turn my timing down so I did and the car was way easier to drive.

I starting to think my bad setup is the reason I had to turn the timing down but I'm open to suggestions.

Chief

iTrader: (14)

Are the version 1 reedy motors still available? I'm looking for a 13.5 and thought they may be lower priced since the Mach 2's came out. Anyone seen any on the net?
Thanks

mschumi101

iTrader: (30)

I fried my new Mach 2 17.5 yesterday, it went up in smoke. So I need a replacement! Is there any word on whether just stators are available from hobby stores? I can only find them on the Associated website with the super-high MSRP...

RedBullFiXX

iTrader: (34)

http://www.tqrcracing.com/shop/produ....asp?p_id=4539

jag88

iTrader: (1)

I have the Mach 2 4.5t and it's very noisy. I keep thinking I have a stone in my gears ... but I don't.
Is this normal for this motor ?
Any fixes ?
Thanks.

mxgregg

iTrader: (32)

I also have a Mach 2 4.5 coming from a Orion 5.5 and I don't notice it being any nosier?