Reedy Sonic
#573
Tech Elite
iTrader: (13)
so whats a good boost profile for 17.5/13.5 sonic with 12.3x24.5 rotor? i ran it similar to my d3 with the 13.5 with 20can timing and 50-10 boost/turbo as per my d3. it was fast, but any better profile i should look at?
12th scale, 17.5 boost. 90x36 carpet usually flowy, but changes per week. I usually run the reedy in tc17.5 but might try my tekin for that this week.
12th scale, 17.5 boost. 90x36 carpet usually flowy, but changes per week. I usually run the reedy in tc17.5 but might try my tekin for that this week.
#575
#576
Tech Adept
iTrader: (12)
Another update on their facebook page:
Sorry for the delay in releasing Sonic Mach 2 info. The person who prepares the official press release is ill and not expected back into the office until tomorrow. For now, part numbers. Please note new 6.0, 7.0, and 8.0 options.
#231 Sonic 540 Mach 2 21.5 Spec
#232 Sonic 540 Mach 2 17.5 Spec
#233 Sonic 540 Mach 2 13.5 Spec
#234 Sonic 540 Mach 2 10.5 Spec
#235 Sonic 540 Mach 2 9.5 Modified
#236 Sonic 540 Mach 2 8.5 Modified
#237 Sonic 540 Mach 2 8.0 Modified
#238 Sonic 540 Mach 2 7.5 Modified
#239 Sonic 540 Mach 2 7.0 Modified
#240 Sonic 540 Mach 2 6.5 Modified
#241 Sonic 540 Mach 2 6.0 Modified
#242 Sonic 540 Mach 2 5.5 Modified
#243 Sonic 540 Mach 2 5.0 Modified
#244 Sonic 540 Mach 2 4.5 Modified
#245 Sonic 540 Mach 2 4.0 Modified
#246 Sonic 540 Mach 2 3.5 Modified
#247 Mach 2 Sensor w/bearing
#248 Mach 2 Steel Bearing Set
#249 Mach 2 Ceramic Bearing Set
#250 Mach 2 Insulator Set
Sorry for the delay in releasing Sonic Mach 2 info. The person who prepares the official press release is ill and not expected back into the office until tomorrow. For now, part numbers. Please note new 6.0, 7.0, and 8.0 options.
#231 Sonic 540 Mach 2 21.5 Spec
#232 Sonic 540 Mach 2 17.5 Spec
#233 Sonic 540 Mach 2 13.5 Spec
#234 Sonic 540 Mach 2 10.5 Spec
#235 Sonic 540 Mach 2 9.5 Modified
#236 Sonic 540 Mach 2 8.5 Modified
#237 Sonic 540 Mach 2 8.0 Modified
#238 Sonic 540 Mach 2 7.5 Modified
#239 Sonic 540 Mach 2 7.0 Modified
#240 Sonic 540 Mach 2 6.5 Modified
#241 Sonic 540 Mach 2 6.0 Modified
#242 Sonic 540 Mach 2 5.5 Modified
#243 Sonic 540 Mach 2 5.0 Modified
#244 Sonic 540 Mach 2 4.5 Modified
#245 Sonic 540 Mach 2 4.0 Modified
#246 Sonic 540 Mach 2 3.5 Modified
#247 Mach 2 Sensor w/bearing
#248 Mach 2 Steel Bearing Set
#249 Mach 2 Ceramic Bearing Set
#250 Mach 2 Insulator Set
#578
Tech Adept
iTrader: (12)
According to a sales rep at Reedy, they have a small first batch and their big shipment on the way from the factory. The part numbers are in their system, just haven't been updated to their website.
$150 is retail price if you want one right away from Reedy...
$150 is retail price if you want one right away from Reedy...
Last edited by mcrcracer; 02-15-2013 at 09:09 AM.
#579
Nobody should pay $149.00 full retail. This is the ROAR limit and just used for street price calculations. Theses should be no more or just a little more than the current version.
#582
Last i ran 17.5 12th i used 71/56 with a 42mm tire, 32* in motor with 12.5mm rotor