How do I make a spool?
#1
How do I make a spool?
I'm going to run mod on a tight track, so I need a spool for the Pro 4. No company has begun to distribute a spool for the Pro 4. Can someone describe to me the process for making a spool out of a standard Pro 4 diff? And advice or links would be greatly appreciated. Thanks Chad
#2
Tech Fanatic
just fill the diff with supa glue and try to take as mutch of the parts out.................rotating waight oh and buy another diff
#3
Tech Master
I wouldn't recommend CA glue, it makes your parts useless afterwards. Here's a pretty good way to "convert" your ball diff to a spool.
1. Remove the diff balls and diff rings.
2. Replace the diff rings with a piece of header card that is cut to the same size (that thin cardboard that the name/price/etc. of a part is printed on)
3. Screw the diff back down really tight.
(Note: there may be another/better way to build this.)
This way, the diff acts like a spool, but if forced, it will give a little, so you don't snap parts. Hope this helps.
1. Remove the diff balls and diff rings.
2. Replace the diff rings with a piece of header card that is cut to the same size (that thin cardboard that the name/price/etc. of a part is printed on)
3. Screw the diff back down really tight.
(Note: there may be another/better way to build this.)
This way, the diff acts like a spool, but if forced, it will give a little, so you don't snap parts. Hope this helps.
#4
Thanks for your advice. Is there a way to bolt a diff shut? I've heard of this, but never been told how to do it?
#7
Tech Initiate
whats the point of a diff anyway....... what does it do?
#9
Tech Fanatic
cos when you turn a corner the outer wheel has to travel a larger curcumfrence than the inner wheel so the diff alowes the wheels to spin at different speeds when cornering......................................do you get it
#10
Tech Initiate
could insuffcient grease on my diff be causing me to spin around corners........esp when im comnig out of apex........all i hear is a loud squeel and then im turned around lol. Yea i get it 100% ive jsut never really thought of it
#11
Tech Fanatic
and a spool is a completly solid shaft with no diff action at all
#12
Tech Fanatic
man you guys post quik......................i pack the crap out of my diffs so i dont have to rebuild them all the time but it could be that your diff is to loose
#13
Tech Apprentice
spool
go to hpi website they are getting ready to realease a spool for the pro 4
#14
Tech Fanatic
#15
so would you put the diff in the front or the back for a tc3