R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

Reply
 
Thread Tools Search this Thread
Old 07-27-2005, 10:18 PM   #6931
Tech Master
 
Fatboy Joe's Avatar
 
Join Date: Apr 2002
Location: Coming soooooon
Posts: 1,052
Default

Quote:
Originally Posted by Trakside Trucke
Hi Neighbours
Not expensive at all when you consider, you get the complete top deck including the fans, screws, the lot.
And what is expensive when your motors go soft about a min from the end of the race, what would you pay for that extra umph
These intergrated C L-CAN-FAN top decks are made from genuine carbon fibre and fit precisley. I have included a pic, not a very good one I must say but gives you an idea whatyou will get for your bucks

If you want, you can wait till Sok l gets his, and he will place a pic for all to see and maybe a comment or two

You can purchase them directly from the manufacturer ME, at the sum of $58.00 including p&p
Please pay via my paypal at [email protected]
Regards Malc (Slim)
R/C INNAVATIONS C L-CAN-FANS RULE
Hi, did you take the temps of the motors with and with out the fans running? How much difference did it make? Thanks
Fatboy Joe is offline   Reply With Quote
Old 07-28-2005, 02:04 AM   #6932
Tech Initiate
 
Join Date: Nov 2004
Posts: 43
Default

for vi3tishduy-
yes the losi on asphalt is amazingly good out of the box. i would buy an associated complete spring set and perhaps a front one way depending upon your preference. other than that there really isnt anything you need to make this car fast. i think sway bars could be overkill although you could put them on the front to lower the spring rates a bit as the car has a slight push. i also have a trf415 in very near ms spec and i have never driven anything as instantly planted as the losi stock or mod. buy this car!
karndriver is offline   Reply With Quote
Old 07-28-2005, 06:01 AM   #6933
Tech Master
 
TheCoolCanFanMan's Avatar
 
Join Date: Apr 2004
Location: Watford
Posts: 1,738
Default

Quote:
Originally Posted by Fatboy Joe
Hi, did you take the temps of the motors with and with out the fans running? How much difference did it make? Thanks
Yes we have done many many temp tests in the last few months with some great results.
Mark Burgess an A,Team driver for Schumacher over here in the UK, said that it reduced the tempreture to nearly half of what it normally came off at, and did a back to back to test this point
Gavin Clinch that is sponsored by Alex Racing also did a back to back test and found that the motor without the DCCF was registering at 85 degrees but when he put a DCCF on to his Barracuda, it came off at 46 degrees
Russel Williams TC4 driver noticed a vast improvement in the punch of his stock motor overall and that the heat was reduced by 12 degrees (but he always seems to get his gearing spot on anyway )
Stuart Rand now sponsored by CML who runs a BD, his motors were going soft after 3mins but now runs DCCF and runs the full 5 mins with no probs
Hope this helps to settle some of the
Malc (Slim)
__________________
ARC 2013 model ZEN Racing, MM-UK, HW 3.1, Rich Paints, MM UK Rug Racers win13.5 2007/8
2nd in 2008/9/10 Win Ansman GP 2010 Schumacher GP. 17.5 blinky Winner of STCC 2009/10 13.5 WLRC 2010 Summer series. Winner of EWS Winter. 17.5 Blinky Winner of 2012/13/14 Rug Racers. 17.5 Blinky 2013 WLRC summer series. Newbury RCC GP 2014 17.5 Blinky 2015 3rd in 17.5 Rug Racers
TheCoolCanFanMan is offline   Reply With Quote
Old 07-28-2005, 07:40 AM   #6934
Tech Addict
 
vi3tishduy's Avatar
 
Join Date: Sep 2004
Location: Colorado
Posts: 530
Send a message via AIM to vi3tishduy
Default

Thanks alot for the help guys! Only problem, my lhs carries losi but, dont have either the TC4 or the JRXS. Hopefully they will soon. What parts should I buy that break alot and wehre are you guys buying yours for a decent price? Ultimate hobbies?
vi3tishduy is offline   Reply With Quote
Old 07-28-2005, 08:11 AM   #6935
Tech Champion
 
Still Bill's Avatar
 
Join Date: Jan 2004
Location: Reno, NV
Posts: 7,234
Trader Rating: 12 (100%+)
Default

Quote:
Originally Posted by vi3tishduy
Thanks alot for the help guys! Only problem, my lhs carries losi but, dont have either the TC4 or the JRXS. Hopefully they will soon. What parts should I buy that break alot and wehre are you guys buying yours for a decent price? Ultimate hobbies?
If your lhs can't order the car you want, you need to find another supplier.

I haven't broken one part on my JRX-S yet. Must not be trying hard enough. Have a Wannabee bumper for one thing. Having spare arms and hubs would take care of common damage issues. Putting on BK Shock Brackets (add-ons) and following the Team Losi driver setups (try Josh Newman's) for that is perfection.

Bill
__________________
Constantly evolving CRC WGT and WGT-R/T...Carpet & Asphalt...All thanks to Team CRC.

And a pair of Associated B6 buggies for turf and clay tracks.
Still Bill is offline   Reply With Quote
Old 07-28-2005, 08:13 AM   #6936
Tech Adept
 
Join Date: Jun 2002
Location: Arvada, Colorado
Posts: 157
Default

vi3tishduy - The HobbyTown in Westminster carries a full line of parts for the JRX-S and the TC4. They are located on the south-east corner of 92nd and Wadsworth. If you need direction from some place, post where you are coming from.

Westminster - Races every sunday in the parking lot in front of the store. And indoors on the carpet on wednesday night.

If you have any other questions please feel free to post them.

Later, Lee
__________________
Founding Member of CORRC
www.OnRoadColorado.com
LeeS is offline   Reply With Quote
Old 07-28-2005, 08:24 AM   #6937
Tech Elite
 
Yeti35's Avatar
 
Join Date: Sep 2004
Location: SL, UT
Posts: 2,804
Trader Rating: 5 (100%+)
Default

Quote:
Originally Posted by vi3tishduy
Thanks alot for the help guys! Only problem, my lhs carries losi but, dont have either the TC4 or the JRXS. Hopefully they will soon. What parts should I buy that break alot and wehre are you guys buying yours for a decent price? Ultimate hobbies?
Are you referring to the shop at MHOR? I can't believe Jess does not carry either of those cars. Thing is he does carry Losi and could easily get it for you with no problem. I would guess no one has really expressed interest there for either of those two cars, which I find hard to believe. I'm personally kicking aroung getting another JRXS!!! I may keep one for asphalt and one for carpet.
__________________
JRXS Type R, I have four of them!! ;) ( Yes, I still have them!!)And racing one of them again!!
22 3.0SR
22T 2.0 w/ Exotech chassis
Yeti35 is offline   Reply With Quote
Old 07-28-2005, 10:25 AM   #6938
Tech Addict
 
vi3tishduy's Avatar
 
Join Date: Sep 2004
Location: Colorado
Posts: 530
Send a message via AIM to vi3tishduy
Default

Yeah. Theres only one guy there with a JRXS. Anyway, dude... in westminister? I live all the way down near utah pool in aurora colorado. I can drive, but I only have a learners permit. My dad wouldnt drive me up there for races every sunday although that would be nice ^_^. How much is the JRXS up at that store in westminister?
vi3tishduy is offline   Reply With Quote
Old 07-28-2005, 10:25 AM   #6939
Tech Addict
 
vi3tishduy's Avatar
 
Join Date: Sep 2004
Location: Colorado
Posts: 530
Send a message via AIM to vi3tishduy
Default

The lowest price thus far is the one at Ultimate hobbies at 359.99.
vi3tishduy is offline   Reply With Quote
Old 07-28-2005, 10:57 AM   #6940
Tech Elite
 
Yeti35's Avatar
 
Join Date: Sep 2004
Location: SL, UT
Posts: 2,804
Trader Rating: 5 (100%+)
Default

I officially have two JRXS's now!! I bought the one here that someone had up that was a carpet car. It will be nice having one for asphalt and for carpet, not to mention all the spare parts!!
__________________
JRXS Type R, I have four of them!! ;) ( Yes, I still have them!!)And racing one of them again!!
22 3.0SR
22T 2.0 w/ Exotech chassis
Yeti35 is offline   Reply With Quote
Old 07-28-2005, 11:04 AM   #6941
Tech Elite
 
EddieO's Avatar
R/C Tech Charter Subscriber
 
Join Date: Oct 2003
Posts: 3,414
Trader Rating: 6 (100%+)
Default

Is there a part number for the BK brackets? Part number on the new battery tray?

Later EddieO
__________________
www.teambrood.com
EddieO is offline   Reply With Quote
Old 07-28-2005, 11:18 AM   #6942
Tech Master
 
EricF's Avatar
 
Join Date: Jun 2003
Location: AZ
Posts: 1,547
Default

EddieO,
PookyT seems to be the main supplier of BK brackets. I don't recall the part # for the Battery.

E
EricF is offline   Reply With Quote
Old 07-28-2005, 11:22 AM   #6943
Tech Elite
 
Join Date: Feb 2004
Location: Maitland, FL
Posts: 2,186
Trader Rating: 18 (100%+)
Send a message via AIM to Roberto Falcon
Default

I thought they were 2 kind the one that pooky makes and the one that losi makes ?!?
__________________
🤔
Roberto Falcon is offline   Reply With Quote
Old 07-28-2005, 11:32 AM   #6944
Tech Master
 
TheCoolCanFanMan's Avatar
 
Join Date: Apr 2004
Location: Watford
Posts: 1,738
Default

To all that may care
The intergrated C L-CAN-FAN stock top deck has exactly the same tolarances as the original 2.80/3.00mm=0.110" but can flutuate as carbon fibre often does, The cost of this mod is $58.00 all in including p&p to the US
We also carry a 1.8/2mm version upgrade top deck to give more flex to the centre of the car, this upgrade will be $29.00. If you was to purchase to 2 items, the cost would be 85.00 Please do not hesitae to ask any more questions you may have
JRX-S Bill has suggested that we leave a little more material towards the rear of the steering fixture holes for more fixing options like on the XXX-S I guess Cheers for that idea, it will be addhered
Malc (Slim)
__________________
ARC 2013 model ZEN Racing, MM-UK, HW 3.1, Rich Paints, MM UK Rug Racers win13.5 2007/8
2nd in 2008/9/10 Win Ansman GP 2010 Schumacher GP. 17.5 blinky Winner of STCC 2009/10 13.5 WLRC 2010 Summer series. Winner of EWS Winter. 17.5 Blinky Winner of 2012/13/14 Rug Racers. 17.5 Blinky 2013 WLRC summer series. Newbury RCC GP 2014 17.5 Blinky 2015 3rd in 17.5 Rug Racers
TheCoolCanFanMan is offline   Reply With Quote
Old 07-28-2005, 11:48 AM   #6945
Tech Elite
 
2-Bad's Avatar
 
Join Date: Jan 2003
Location: Australia
Posts: 2,725
Trader Rating: 24 (100%+)
Default

Quote:
Originally Posted by EddieO
Is there a part number for the BK brackets? Part number on the new battery tray?

Later EddieO
Battery Tray LOSA4309

BK Brackets; I heard they were going to be moulded into the arms one day... coming soon.... otherwise, The "Pook Master" is da Man.....
2-Bad is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Team Losi JRXS Fast XXXS Australia For Sale/Trade 6 11-19-2007 03:34 PM
F-S Team losi JRXS as new mcskoda Australia For Sale/Trade 6 10-31-2006 02:15 AM
FS:Team Losi JRXS BiggAlz R/C Items: For Sale/Trade 21 03-25-2006 05:47 PM
Team Losi JRXS FS JRXSBear R/C Items: For Sale/Trade 9 01-19-2006 03:57 PM
Team Losi JRXS Jon Carlson R/C Items: For Sale/Trade 3 01-18-2006 08:28 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 07:57 PM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net