R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

Reply
 
Thread Tools Search this Thread
Old 05-19-2005, 08:00 AM   #5326
TLRacing
 
Todd Hodge's Avatar
 
Join Date: Sep 2002
Location: California
Posts: 1,676
Default Re: Todd Hodge Asphalt SetUp

Quote:
Originally posted by EddiRossi
Hi Todd,

again on your setup, nothing is missing, but I am in doubt for the Front Roll Center: is it "high" because you added two .050" spacers to the blocks in "low" position, or you started from "high" position of blocks and furtherly added the spacers?

If so, this seems a big difference with the Rear "low" center, isn' t it?

The JRXS is great: when compared with this car, all the competitors look like old...

Thanks,

Eddi.
The front is high plus .100" spacers and the rear is full low. Trust me it works!!
__________________
Todd Hodge
Category Development Manager for Losi and Team Losi Racing
Losi and Team Losi Racing, brands of Horizon Hobby
Team Losi Racing, Orion, Nitrotane, Spektrum, Imagine It Graphics, Bradley Fine Line Designs, and Lunsford.
Todd Hodge is offline   Reply With Quote
Old 05-19-2005, 08:02 AM   #5327
TLRacing
 
Todd Hodge's Avatar
 
Join Date: Sep 2002
Location: California
Posts: 1,676
Default

Quote:
Originally posted by P-DUB
Hi Todd....I will be bringing some bumpers with me to the Reedy Race and was checkin to see if you need a freshy. I was told RB got you a bumper direct because of the delay we had for the Snowbirds.....Let me know

See ya next week!
I still have a few left over. Do you have any that have the trick cut outs in them.
__________________
Todd Hodge
Category Development Manager for Losi and Team Losi Racing
Losi and Team Losi Racing, brands of Horizon Hobby
Team Losi Racing, Orion, Nitrotane, Spektrum, Imagine It Graphics, Bradley Fine Line Designs, and Lunsford.
Todd Hodge is offline   Reply With Quote
Old 05-19-2005, 03:11 PM   #5328
Tech Initiate
 
Join Date: Jun 2003
Location: Italy
Posts: 38
Default

Thanks Todd !

Did you used the aluminium chassis posts tightened or they were loose/removed? And when not available the BK brackets, can I increase by around 20% oil thickness and spring rate to get a similar (not equal) result?

If I' m lucky I' ll hit my home track tomorrow to test the car!
I can' t wait for that...

Eddi.
EddiRossi is offline   Reply With Quote
Old 05-19-2005, 03:23 PM   #5329
Tech Fanatic
 
P-DUB's Avatar
 
Join Date: Feb 2004
Posts: 842
Default

Quote:
Originally posted by T. Hodge
I still have a few left over. Do you have any that have the trick cut outs in them.
To late for the Reedy Race, but I will look into that for the future
__________________
Larry Pryor
P-DUB is offline   Reply With Quote
Old 05-19-2005, 03:52 PM   #5330
Tech Elite
 
POOKYT's Avatar
 
Join Date: Oct 2002
Location: Cabot, AR
Posts: 3,584
Default

Quote:
Originally posted by P-DUB
To late for the Reedy Race, but I will look into that for the future
Waz Up with the " Trick" cut outs Fellas???????????? Don't hold out on us now!!!!! Show us the cool cut out bumper. Pleaseeeeeee

Brant
__________________
EA Motorsports--B-Main Motorsports--Blizzard Concepts--Loose Nuts Racing--BigDog Graphics

My Carbon Footprint is Larger than Yours! :p
POOKYT is offline   Reply With Quote
Old 05-19-2005, 03:57 PM   #5331
Tech Fanatic
 
P-DUB's Avatar
 
Join Date: Feb 2004
Posts: 842
Default

Quote:
Originally posted by POOKYT
Waz Up with the " Trick" cut outs Fellas???????????? Don't hold out on us now!!!!! Show us the cool cut out bumper. Pleaseeeeeee

Brant
Hi Brant....The TC4 bumper is the only one right now that has the trick cut-outs, but I'm going to look into it for the rest of the bumpers in the next few weeks
__________________
Larry Pryor
P-DUB is offline   Reply With Quote
Old 05-19-2005, 04:01 PM   #5332
Tech Elite
 
POOKYT's Avatar
 
Join Date: Oct 2002
Location: Cabot, AR
Posts: 3,584
Default

Quote:
Originally posted by P-DUB
Hi Brant....The TC4 bumper is the only one right now that has the trick cut-outs, but I'm going to look into it for the rest of the bumpers in the next few weeks
What do the cut outs do? Got any pics?

Brant
__________________
EA Motorsports--B-Main Motorsports--Blizzard Concepts--Loose Nuts Racing--BigDog Graphics

My Carbon Footprint is Larger than Yours! :p
POOKYT is offline   Reply With Quote
Old 05-19-2005, 04:04 PM   #5333
Tech Elite
 
DavidAlford's Avatar
 
Join Date: Oct 2001
Location: Oklahoma
Posts: 4,151
Trader Rating: 31 (100%+)
Send a message via AIM to DavidAlford
Default

Brant, got the mail today. You are the man.
__________________
Hot Bodies/HPI | Jconcepts | Viper RC | Xpert | Sippel Speed Shop | Lawton RC Raceway | SXT
DavidAlford is offline   Reply With Quote
Old 05-19-2005, 04:08 PM   #5334
Tech Elite
 
POOKYT's Avatar
 
Join Date: Oct 2002
Location: Cabot, AR
Posts: 3,584
Default

Quote:
Originally posted by DavidAlford
Brant, got the mail today. You are the man.
Thank You Sir!!! I have only run the BK blocks with the total Hodge asphalt setup so you guys may want to try different things with them. After I put the whole Hodge setup last weekend, my car was so smooth and fast and quick around the sweepers and tight turns I left it alone and just drove the shiznit out of it. I could drive it hard if I needed to or back off just a hair in traffic and it was still fast around the corners. Good Luck and let me know how they do for you David.

Brant
__________________
EA Motorsports--B-Main Motorsports--Blizzard Concepts--Loose Nuts Racing--BigDog Graphics

My Carbon Footprint is Larger than Yours! :p
POOKYT is offline   Reply With Quote
Old 05-19-2005, 06:31 PM   #5335
Tech Elite
 
CRASH's Avatar
 
Join Date: Jan 2002
Posts: 2,715
Trader Rating: 26 (100%+)
Default Todd, Swaybar Question

On the swaybars how long do the turnbuckles need to be. Mines threaded all the way together no gap.

Thanks,
CRASH is offline   Reply With Quote
Old 05-19-2005, 07:12 PM   #5336
Team EAM
 
EAMotorsports's Avatar
 
Join Date: Dec 2001
Location: Murfreesboro, TN
Posts: 9,158
Trader Rating: 79 (100%+)
Send a message via AIM to EAMotorsports
Default PRS Gear adapters

Hey guys I got the adapters in today with 128 spurs. The adapters will work with a solid shaft or the one way shaft. All the ones I got are red and come with the red adapter, red alumn screws and a 128 PRS spur. 19.95.

EA
Attached Images
File Type: jpg adapter.jpg (28.1 KB, 196 views)
__________________
Contact Us
Team EAM, Our Facebook
Team EAM | Xray | RCAmerica | Hudy | APEX Raceway and Hobbies | RC Mission | Killer Concepts | AVID | Hobbywing.
EAMotorsports is offline   Reply With Quote
Old 05-19-2005, 08:03 PM   #5337
TLRacing
 
Todd Hodge's Avatar
 
Join Date: Sep 2002
Location: California
Posts: 1,676
Default Re: Todd, Swaybar Question

Quote:
Originally posted by CRASH
On the swaybars how long do the turnbuckles need to be. Mines threaded all the way together no gap.

Thanks,
I just make mine to the point where there is a perfect 90 degree angle between the bar and the links.
__________________
Todd Hodge
Category Development Manager for Losi and Team Losi Racing
Losi and Team Losi Racing, brands of Horizon Hobby
Team Losi Racing, Orion, Nitrotane, Spektrum, Imagine It Graphics, Bradley Fine Line Designs, and Lunsford.
Todd Hodge is offline   Reply With Quote
Old 05-19-2005, 08:08 PM   #5338
Tech Fanatic
 
P-DUB's Avatar
 
Join Date: Feb 2004
Posts: 842
Default

Brant....The cut outs are just to save more weight and it looks pretty cool http://www.pdubracing.com/products.htm Click on the TC4 bumper to inlarge for a good look
__________________
Larry Pryor
P-DUB is offline   Reply With Quote
Old 05-19-2005, 08:47 PM   #5339
Tech Elite
 
POOKYT's Avatar
 
Join Date: Oct 2002
Location: Cabot, AR
Posts: 3,584
Default

Quote:
Originally posted by P-DUB
Brant....The cut outs are just to save more weight and it looks pretty cool http://www.pdubracing.com/products.htm Click on the TC4 bumper to inlarge for a good look
Thanks for the pic! Can I get one with my name in it? J/K!!! LMAO Can I?

Brant
__________________
EA Motorsports--B-Main Motorsports--Blizzard Concepts--Loose Nuts Racing--BigDog Graphics

My Carbon Footprint is Larger than Yours! :p
POOKYT is offline   Reply With Quote
Old 05-19-2005, 08:53 PM   #5340
Tech Fanatic
 
P-DUB's Avatar
 
Join Date: Feb 2004
Posts: 842
Default

Personal bumpers, now we are pushing it....LOL See what you started Hodge I think the bumpers will stay the same for a little while
__________________
Larry Pryor
P-DUB is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Team Losi JRXS Fast XXXS Australia For Sale/Trade 6 11-19-2007 03:34 PM
F-S Team losi JRXS as new mcskoda Australia For Sale/Trade 6 10-31-2006 02:15 AM
FS:Team Losi JRXS BiggAlz R/C Items: For Sale/Trade 21 03-25-2006 05:47 PM
Team Losi JRXS FS JRXSBear R/C Items: For Sale/Trade 9 01-19-2006 03:57 PM
Team Losi JRXS Jon Carlson R/C Items: For Sale/Trade 3 01-18-2006 08:28 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 01:24 AM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net