trying to make a parts list that i need for this RS4 Pro 3
#1
trying to make a parts list that i need for this RS4 Pro 3
i have shocks/tires/ motor/ and radio and receiver .. what esle do i need!
thanks for the help
thanks for the help
#3
Tech Adept
Spare parts for the Pro 3 are almost non-existent unless you can find them on the used car market. Also, you will almost assuredly have to use round cells or stick packs. I am not aware of any LiPo batteries that will work, especially anything in a hard case. Even if they fit length-wise they will most likely interfere with the lay shaft pulleys. Good luck in getting it together. You have a couple of nice optional parts (most of the purple items).
Last edited by calvin; 05-03-2011 at 09:43 AM.
#4
Tech Elite
iTrader: (8)
Looks like you're missing a rear diff cover, a rear camber link, battery tie down...
I've got a ton of spare Pro 3 parts I'll never use. Many of them have seen some use, but whatever you're missing, I'm sure I have (except maybe the battery hold-down, I think I only have one).
EDIT: I've got a couple Orion LiPos that do fit, but I don't know if they're still good. I went back to NiMH because the car's balance was way off, and it was traction rolling like crazy with the LiPo.
-Mike
I've got a ton of spare Pro 3 parts I'll never use. Many of them have seen some use, but whatever you're missing, I'm sure I have (except maybe the battery hold-down, I think I only have one).
EDIT: I've got a couple Orion LiPos that do fit, but I don't know if they're still good. I went back to NiMH because the car's balance was way off, and it was traction rolling like crazy with the LiPo.
-Mike