DZ

iTrader: (4)

hi Guys,

Were else can i purchase Paradigm products from besides the website?

i'm after a couple P2k2's..

Brandon if you can help it would be much appriecated, i live in Australia and have our Nationals coming up in November.

Cheers guys.

Any help would be great.

Mr. Shookie

iTrader: (9)

Just give them a call, they always help me out. I am sure that they will work something out for shipping to Aus. I don't think you can get them anywhere else unless your Local HS has them.

Stephen <><

mzenz

DZ,

What part of Australia do you reside? We have dealers in Sydney and Perth. If these are close to you, let me know and I can give you the contact information.

Otherwise, PM or E-mail me and we can work something out...

As Shooky mentioned above, you can also order via phone by calling 1-920-469-8723. Our phone hours are Monday, Tuesday, and Thursday from 11am to 7pm and Wednesday and Friday from 11am to 5pm. All times U.S Central (GMT -5 until 31 October, then GMT -6).

Hope this helps, if you have any questions please let us know!

Speedie

Matteucci

Hey Matt,

I left brandon a message about my phone order, didn't here back from him at all yet.

Just wonderin if you guys saw it or not.

Thanks,

Ron Matteucci

Brian McGreevy

iTrader: (10)

Ron, you coming to RSJ saturday? You oughta. Brand new ozite

Matteucci

Sorry, house projects to take care of, + new car still in process of building to perfection (TC4)

I want to make it down and check it out some time thought, sounds like a great place!

jc510

iTrader: (7)

I was cutting the com on my Binary stock motor and asked the LHS to zap the can for me. When I finished cutting the com, the can was done. I through the motor together and check it on my motor checker.

Before rebuild it ran at 23500 RPM @ 4 volts and around 9 amps

After the rebuild, it ran 34800 rpms @ 4 volts and 9.6 amps

I tried to dyno it, but the dyno kept reading an error.

Anyone???

I haven't put it on the track yet.

Speedie

You are not the first person I have seen on the forums saying the same thing about the binary stocks.

jc510

iTrader: (7)

If this is a good thing, I'll do all the Binary stock motors I have.

I just have to test it in my car.

EngTat

iTrader: (17)

i just took out my spare team paradigm binary motor. but when i power up at my gfx 35 at 3 v the amp reading it some where around 8,9 amp and 5.5v is sumwhre more then 12 amp and when i try 7.2v my gfx shuts down, what is happening wieth motor. i think is abnormal what can i do???

EngTat

iTrader: (17)

my serial number is 218 and 21521 brush

Michal101

iTrader: (13)

jc510,

That is a nice increase in RPM's, but what about torque (my favorite number to look at for sedan racing) or overall power numbers?

Mike

John Tag

iTrader: (42)

I am not speaking for Brandon,but my experence with the GFX and some of my GOOD motors. I break them in at 2 volts at end of break in there 10.5+ amps .I cant even think of 3 volts or higher my GFX shuts down. When the brushes really seat in after 1 pack my motors than will pull 9-10 amps at 3 volts.I wouldn't worry mine are rockets.

jc510

iTrader: (7)

Michal101- I tried to dyno the motor, but the dyno won't complete the cycle. I get an error message. The dyno is the CS Powercheck

I have another binary that was 1 nn off the motor in question, I will have to run them both and watch the differences.