R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

Reply
 
Thread Tools Search this Thread
Old 09-24-2003, 04:05 PM   #4636
Tech Champion
 
rc-zombies's Avatar
 
Join Date: Aug 2001
Location: NorCal. Napa area
Posts: 7,212
Trader Rating: 8 (100%+)
Default Re: One-way bearings

Quote:
Originally posted by JohnA
Does any-one know if you can replace the bearings in the 'Cuda one-way?

I'm a bit tight on cash at the moment and my one-way has failed again! I'll get one of the 4 bearing ones in a little while but for now if I can get this one repaired that would be good.

yea I would like to know too....
__________________
HB WCE HARA EDITION CYCLONE: LRP Sphere TC, KO 2363 digital servo.
HB HARA EDITION PRO4: Gone to a new home..

SPEEDTECH|FUTABA|KO|ORION|SPEEDWORLD|HARA
rc-zombies is offline   Reply With Quote
Old 09-24-2003, 04:09 PM   #4637
Tech Prophet
 
Randy Caster's Avatar
R/C Tech Elite Subscriber
 
Join Date: Mar 2003
Location: Costa Mesa, CA
Posts: 16,675
Trader Rating: 46 (100%+)
Default

You can replace the bearings, but getting a press to push the stock ones out would be the biggest problem I'd think. Then you gotta find someone who makes 1 way bearings to replace the stock ones with.
Randy Caster is offline   Reply With Quote
Old 09-24-2003, 04:09 PM   #4638
Tech Champion
 
JDM_DOHC_SiR's Avatar
 
Join Date: Aug 2002
Location: Chula Vista, CA
Posts: 9,070
Trader Rating: 31 (100%+)
Default Re: One-way bearings

Quote:
Originally posted by JohnA
Does any-one know if you can replace the bearings in the 'Cuda one-way?

I'm a bit tight on cash at the moment and my one-way has failed again! I'll get one of the 4 bearing ones in a little while but for now if I can get this one repaired that would be good.

If any-ones has a spare going cheapish (pref red) of a spare diff drop me a PM.
yes you can change them but you have to be careful of the Gear reing when you press them out...
also you can make your own 4 bearing one way if you get all of the bearings out ....
BTW
the standard one way has 2 bearing and 4 bushings!! ..it's a real paint to get them out..just make sure you heat up the one way to get the bearings out( oven) and use a really slick lubricant......WD40 or Breakfree

-Dave
__________________
Ȼ4.5 Centro+α ◊ TRF 501ӽ ◊ TRF 502ӽs ◊ TRF 503 ◊ TRF 511 ◊ TRF 201ӽr ◊ TRF 211ӽ
B5m ◊ T5m ◊SC5m ◊ B64deez nutz
Speedway PAL ◊ SDRC ◊ Shop UFO ◊ SMC
JDM_DOHC_SiR is offline   Reply With Quote
Old 09-24-2003, 04:15 PM   #4639
Tech Champion
 
JDM_DOHC_SiR's Avatar
 
Join Date: Aug 2002
Location: Chula Vista, CA
Posts: 9,070
Trader Rating: 31 (100%+)
Default

Quote:
Originally posted by Randman
You can replace the bearings, but getting a press to push the stock ones out would be the biggest problem I'd think. Then you gotta find someone who makes 1 way bearings to replace the stock ones with.
I belive that Steve at speed tech knows the size and so does Dave Berger.... so do I but the package that has the spare bearings is at my house

BTW Squat makes them .....
-Dave
__________________
Ȼ4.5 Centro+α ◊ TRF 501ӽ ◊ TRF 502ӽs ◊ TRF 503 ◊ TRF 511 ◊ TRF 201ӽr ◊ TRF 211ӽ
B5m ◊ T5m ◊SC5m ◊ B64deez nutz
Speedway PAL ◊ SDRC ◊ Shop UFO ◊ SMC
JDM_DOHC_SiR is offline   Reply With Quote
Old 09-24-2003, 04:39 PM   #4640
Tech Master
 
rc_bam226's Avatar
 
Join Date: Mar 2003
Location: SF Bay Area
Posts: 1,074
Default

Anyone know a good way to do rebuild the shocks using that bleed screw? I either put too much oil in, or I think I'm doing it right, but the shock does not rebound. Help me out guys!!! Thanks.
rc_bam226 is offline   Reply With Quote
Old 09-24-2003, 04:52 PM   #4641
Regional Moderator
R/C Tech Charter Subscriber
 
Join Date: Nov 2001
Location: IRT #122
Posts: 3,364
Default Re: Xenon R2...the blue one

Quote:
Originally posted by JDM_DOHC_SiR
Well here is the pic`s not the best shots..but you get the picture..
-Dave

very nice dave
Ko Racer is offline   Reply With Quote
Old 09-24-2003, 05:03 PM   #4642
Tech Addict
 
Join Date: Sep 2003
Location: QLD Aussie
Posts: 510
Default

hey i just like to know i am about to buy a car and like to know
Barracuda R2 how does it go agaisnt a Xray EVO2
i like to know quick i can so i can get it
TheRaven is offline   Reply With Quote
Old 09-24-2003, 05:04 PM   #4643
Tech Addict
 
JohnA's Avatar
 
Join Date: Aug 2001
Location: Back in good old England :)
Posts: 590
Default

Quote:
Originally posted by rc_bam226
Anyone know a good way to do rebuild the shocks using that bleed screw? I either put too much oil in, or I think I'm doing it right, but the shock does not rebound. Help me out guys!!! Thanks.
I personally am not a big fan of the 'Cuda shocks My advice is get some Yokomo shock caps and bladders.

Sorry not much help, if any-one has any better suggestions it would be nice to hear them.

BTW Dave, when you get home could you post the size of the one-way bearings?
JohnA is offline   Reply With Quote
Old 09-24-2003, 06:54 PM   #4644
Tech Champion
 
JDM_DOHC_SiR's Avatar
 
Join Date: Aug 2002
Location: Chula Vista, CA
Posts: 9,070
Trader Rating: 31 (100%+)
Default

Quote:
Originally posted by rc_bam226
Anyone know a good way to do rebuild the shocks using that bleed screw? I either put too much oil in, or I think I'm doing it right, but the shock does not rebound. Help me out guys!!! Thanks.

well they are quite good.... you just need to over fill them from the top and then put a little bit of oil in the cap then gradually bleed from the screw untill you get the desired rebound you want...



-Dave
__________________
Ȼ4.5 Centro+α ◊ TRF 501ӽ ◊ TRF 502ӽs ◊ TRF 503 ◊ TRF 511 ◊ TRF 201ӽr ◊ TRF 211ӽ
B5m ◊ T5m ◊SC5m ◊ B64deez nutz
Speedway PAL ◊ SDRC ◊ Shop UFO ◊ SMC
JDM_DOHC_SiR is offline   Reply With Quote
Old 09-24-2003, 06:55 PM   #4645
Tech Champion
 
JDM_DOHC_SiR's Avatar
 
Join Date: Aug 2002
Location: Chula Vista, CA
Posts: 9,070
Trader Rating: 31 (100%+)
Default

Quote:
Originally posted by TheRaven
hey i just like to know i am about to buy a car and like to know
Barracuda R2 how does it go agaisnt a Xray EVO2
i like to know quick i can so i can get it

Aske Red BullFixx..


He has both and can tell you..

-Dave
__________________
Ȼ4.5 Centro+α ◊ TRF 501ӽ ◊ TRF 502ӽs ◊ TRF 503 ◊ TRF 511 ◊ TRF 201ӽr ◊ TRF 211ӽ
B5m ◊ T5m ◊SC5m ◊ B64deez nutz
Speedway PAL ◊ SDRC ◊ Shop UFO ◊ SMC
JDM_DOHC_SiR is offline   Reply With Quote
Old 09-24-2003, 06:56 PM   #4646
Tech Champion
 
JDM_DOHC_SiR's Avatar
 
Join Date: Aug 2002
Location: Chula Vista, CA
Posts: 9,070
Trader Rating: 31 (100%+)
Default

Quote:
Originally posted by JohnA


BTW Dave, when you get home could you post the size of the one-way bearings?

Sure I gotcha'


-Dave
__________________
Ȼ4.5 Centro+α ◊ TRF 501ӽ ◊ TRF 502ӽs ◊ TRF 503 ◊ TRF 511 ◊ TRF 201ӽr ◊ TRF 211ӽ
B5m ◊ T5m ◊SC5m ◊ B64deez nutz
Speedway PAL ◊ SDRC ◊ Shop UFO ◊ SMC
JDM_DOHC_SiR is offline   Reply With Quote
Old 09-24-2003, 08:43 PM   #4647
Tech Master
 
rc_bam226's Avatar
 
Join Date: Mar 2003
Location: SF Bay Area
Posts: 1,074
Default

Thanks Dave, I got them to balance.
rc_bam226 is offline   Reply With Quote
Old 09-24-2003, 09:23 PM   #4648
Tech Champion
 
JDM_DOHC_SiR's Avatar
 
Join Date: Aug 2002
Location: Chula Vista, CA
Posts: 9,070
Trader Rating: 31 (100%+)
Default

Quote:
Originally posted by rc_bam226
Thanks Dave, I got them to balance.

Sweet ... Let me know if you need more help with the "GRAPE"

-Dave
__________________
Ȼ4.5 Centro+α ◊ TRF 501ӽ ◊ TRF 502ӽs ◊ TRF 503 ◊ TRF 511 ◊ TRF 201ӽr ◊ TRF 211ӽ
B5m ◊ T5m ◊SC5m ◊ B64deez nutz
Speedway PAL ◊ SDRC ◊ Shop UFO ◊ SMC
JDM_DOHC_SiR is offline   Reply With Quote
Old 09-24-2003, 09:43 PM   #4649
Tech Master
 
rc_bam226's Avatar
 
Join Date: Mar 2003
Location: SF Bay Area
Posts: 1,074
Default

It is a very SWWEEEEETT GRAPE!!
rc_bam226 is offline   Reply With Quote
Old 09-24-2003, 09:58 PM   #4650
Tech Champion
 
JDM_DOHC_SiR's Avatar
 
Join Date: Aug 2002
Location: Chula Vista, CA
Posts: 9,070
Trader Rating: 31 (100%+)
Default

Quote:
Originally posted by rc_bam226
It is a very SWWEEEEETT GRAPE!!
I know ...

Make sure to take care of it for me.. that car had the most free spinning drive train that I had on any Barracuda..

-Dave
__________________
Ȼ4.5 Centro+α ◊ TRF 501ӽ ◊ TRF 502ӽs ◊ TRF 503 ◊ TRF 511 ◊ TRF 201ӽr ◊ TRF 211ӽ
B5m ◊ T5m ◊SC5m ◊ B64deez nutz
Speedway PAL ◊ SDRC ◊ Shop UFO ◊ SMC

Last edited by JDM_DOHC_SiR; 09-25-2003 at 01:10 AM.
JDM_DOHC_SiR is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
WTB Alex Racing Barracuda R2 & R3 Funkymojo R/C Items: Wanted to Buy 3 02-03-2007 01:00 PM
alex racing barracuda con81 Electric On-Road 1 12-14-2005 03:36 AM
WTT: Alex Racing Barracuda R2 for PS2 AZ_Ron Other Items: For Sale/Trade or Wanted to Buy 0 02-13-2005 07:30 PM
Alex Racing Barracuda R3-New. rcracing1973 R/C Items: For Sale/Trade 9 04-11-2004 08:29 AM
Alex Racing Barracuda Bugs Bunny Singapore R/C Racers 6 01-22-2003 11:47 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 02:23 PM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net