R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

Reply
 
Thread Tools Search this Thread
Old 03-26-2011, 03:47 AM   #1
Tech Regular
 
Join Date: Aug 2007
Posts: 399
Default LRP SXX StockSpec V2 ESC set ups

Please keep this thread purely for set ups for pan and tc cars please. The following set ups are from Andy griffith the dual 2011 uk champion in 1/12th stock and open mod.

Stock 1s 10.5 1/12th pancar. X12 10.5 1S rotor.

0,4,11,0 rollout of 41.5mm

Stock 1s 10.5 1/12th pancar x12 10.5 normal rotor

0,4,5,0 rollout of 48mm.

Looking for 13.5 and mod setups in 1/12th pan cars.
__________________
MB Models Leeds,RC4LESS,Troy McKune
V-DEZIGN CR5 ,LRP SXX, CRC cells,
tellan is offline   Reply With Quote
Old 03-29-2011, 02:43 AM   #2
Tech Regular
 
Join Date: Aug 2007
Posts: 399
Default 13.5 pan car

settings for 1/12th pan car using X12 13.5

0,5,6,0 1s rotor 4 dot insert and 65mm rollout
__________________
MB Models Leeds,RC4LESS,Troy McKune
V-DEZIGN CR5 ,LRP SXX, CRC cells,
tellan is offline   Reply With Quote
Old 03-30-2011, 11:30 AM   #3
Tech Master
 
Join Date: Mar 2002
Location: Indianapolis, IN
Posts: 1,040
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by tellan View Post
settings for 1/12th pan car using X12 13.5

0,5,6,0 1s rotor 4 dot insert and 65mm rollout

Did you experience excessive heat in the motor? I run tonight so I will have more later for you.
davidl is offline   Reply With Quote
Old 03-30-2011, 11:43 AM   #4
Tech Elite
 
mike ivy's Avatar
 
Join Date: Feb 2002
Location: Comin at ya from a distant galaxy
Posts: 2,795
Trader Rating: 50 (100%+)
Default

You guys have a setup/gearing for a D3 for 13.5 1/12th?
__________________
[-eXpress motorsports-] [-TQ Wire-]

1/12th Fo' Life!!! R.I.P Mike Reedy, R.I.P John Williams

[-Horsham RC-] [-Jackson RC-] [-RC Car World-] [ Black Out Free 2015 ]
mike ivy is offline   Reply With Quote
Old 03-30-2011, 01:55 PM   #5
Tech Regular
 
Join Date: Jun 2010
Location: UK
Posts: 286
Default

Just got one of these, would like some 13.5t (X12) TC set up's please, asphalt and carpet
S.A.W is offline   Reply With Quote
Old 03-30-2011, 04:06 PM   #6
Tech Master
 
Join Date: Mar 2002
Location: Indianapolis, IN
Posts: 1,040
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by tellan View Post
settings for 1/12th pan car using X12 13.5

0,5,6,0 1s rotor 4 dot insert and 65mm rollout

My first run was at 1,4,6,0 & 2.35 in rollout. Track is green and temp was 135 F. Ran out of rear tire @ 6 miutes. We will see what happens as the track improves.
davidl is offline   Reply With Quote
Old 03-30-2011, 11:18 PM   #7
Tech Master
 
Join Date: Mar 2002
Location: Indianapolis, IN
Posts: 1,040
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by davidl View Post
My first run was at 1,4,6,0 & 2.35 in rollout. Track is green and temp was 135 F. Ran out of rear tire @ 6 miutes. We will see what happens as the track improves.

I didn't change anything as I had a major right front rebuild. Lap times improved as the night went on. Needed more rip so will change feel to 5 next time out. Rollout might go up as well. Tellan might have the right stuff.
davidl is offline   Reply With Quote
Old 03-31-2011, 01:09 AM   #8
Tech Adept
 
Join Date: Jan 2008
Posts: 176
Default

Quote:
Originally Posted by S.A.W View Post
Just got one of these, would like some 13.5t (X12) TC set up's please, asphalt and carpet
I have been using this combo and loving it!!

Geared at 5.8 - 6 and follow setup suggestion in the speedo manual, It is very quick and oober smooth and loads of brakes

Love it!! :-)
008-Racer is offline   Reply With Quote
Old 03-31-2011, 08:25 AM   #9
Tech Elite
 
Warren Weaver's Avatar
 
Join Date: Jul 2004
Location: NASCAR COUNTRY
Posts: 2,479
Trader Rating: 47 (100%+)
Default

If running ion3 or duo3 dont run anything but 0 degree timing on motor or you will smoke the motor stick with 5.0 fdr in tc with 0,10,6,2 that seemed to work great with lower motor temps around 130
__________________
R1 WURKS-AWESOMATIX USA-LRP-BITTYDESIGN-TQ WIRE-PROTOTYPE RACING-SWEEP RACING-TXDSKINGRAPHIX-HOBMAX-THE RUG-TEAM EZDUZIT
R.I.P. MY FRIEND JDUB MISSED BUT NEVER FORGOTTEN
Warren Weaver is offline   Reply With Quote
Old 04-14-2011, 11:39 AM   #10
Tech Master
 
Join Date: Mar 2002
Location: Indianapolis, IN
Posts: 1,040
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by davidl View Post
I didn't change anything as I had a major right front rebuild. Lap times improved as the night went on. Needed more rip so will change feel to 5 next time out. Rollout might go up as well. Tellan might have the right stuff.

I need to update this after last nights run. Car was very, very good.

Car CRC GenXL 1S Lipoly

Motor X-12 13.5 0000 1S rotor Temp 165 deg F

Speedo LRP SXX SS 1,5,8,0

Rollout 2.05 inches (51mm?)

Comments: seems as fast and driveable as the 10x2 I used to run. The RIP was there. Lap times fell off .6 seconds in the last minute. Could tune that a little better.
davidl is offline   Reply With Quote
Old 04-23-2011, 01:33 PM   #11
Tech Adept
 
Join Date: Apr 2010
Posts: 167
Default Why are the new combos so expensive??

post deleted... moved to correct thread

Last edited by bryan562; 04-24-2011 at 10:52 AM. Reason: Re-posted to correct thread
bryan562 is offline   Reply With Quote
Old 04-26-2011, 01:41 PM   #12
Tech Master
 
Join Date: Mar 2002
Location: Indianapolis, IN
Posts: 1,040
Trader Rating: 1 (100%+)
Default 1/12 single cell 13.5

I tried to go back to the 12.5 rotor last wed and didn't like it near as well as when using the 1S rotor. Motor temp now up to 195 deg F as opposed to 160 Deg F with the 1S rotor. Top speed was slower and the RIP was not there. Speedo set at 1,5,8,0 for both motor combinations. 51MM or 2.03 inches was the rollout for both.
davidl is offline   Reply With Quote
Old 05-16-2011, 06:19 AM   #13
Tech Master
 
Join Date: Mar 2002
Location: Indianapolis, IN
Posts: 1,040
Trader Rating: 1 (100%+)
Default

Quote:
Originally Posted by davidl View Post
I tried to go back to the 12.5 rotor last wed and didn't like it near as well as when using the 1S rotor. Motor temp now up to 195 deg F as opposed to 160 Deg F with the 1S rotor. Top speed was slower and the RIP was not there. Speedo set at 1,5,8,0 for both motor combinations. 51MM or 2.03 inches was the rollout for both.

Time to update this entry. Adjusted the boost to setting 6. Increased rollout to 2.5 inches. Car was very, very fast and only dropped off .4 seconds from fast lap to last lap. Here is the rundown:

1/12 scale 1S lipoly, 13.5t X-12 motor, 2.5 inch rollout

Motor at 4 dot timing, 1S 12.25 rotor, temp 155 deg F.

Speedo at 1,5,6,0
davidl is offline   Reply With Quote
Old 05-25-2011, 07:19 PM   #14
Tech Master
 
andrew-01's Avatar
 
Join Date: Mar 2007
Location: SOCAL
Posts: 1,210
Trader Rating: 22 (100%+)
Default

Any of you guys been running boosted with 17.5?

Looking for a good base setup for 1/12th pan car, boosted x12 17.5, track is just under 100ft.

Thanks
__________________
ANDRXW.com
andrew-01 is offline   Reply With Quote
Old 05-26-2011, 05:37 AM   #15
Tech Regular
 
Join Date: Aug 2007
Posts: 399
Default set up with duo 3 10.5

Used this in my WGT car 0.10.12.0 rollout of 72mm very good and cool motor.
__________________
MB Models Leeds,RC4LESS,Troy McKune
V-DEZIGN CR5 ,LRP SXX, CRC cells,
tellan is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
LRP SXX StockSpec V2 ESC andrew-01 Electric On-Road 1179 02-01-2015 10:31 AM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 04:47 PM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net