WRC Racing F-One
#61
21.5 much the same as G2 on LiPo I believe
I know that
I know that too, he's posted the pictures
#62
#63
Another option part from WRC F-ONE camber adjustment
http://www.wrc-racing.eu/ricambi/ico/f-one091.jpg
http://www.wrc-racing.eu/ricambi/ico/f-one091.jpg
#65
Another option part from WRC F-ONE camber adjustment
http://www.wrc-racing.eu/ricambi/ico/f-one091.jpg
http://www.wrc-racing.eu/ricambi/ico/f-one091.jpg
post a picture of them in use if you have them as the small library picture doesn't help much
#66
which is great new's and the only part that broke was the front wing, and that was caused by a T/C stopping on the straight and not giving a warning
The foam tyres have now completed in-excess of 360 laps at various tracks without being damaged
#69
#70
Have no ideal , never owned a F-104 ,what i can tell you is the F-ONE is 190mm wide . why not try a F-ONE to RACE
#71
#72
camber link
Have received from WRC the camber link parts there are 4 items
the range off adjustment is 0 to 3 degrees, and have fitted the 2 degrees to my F1, I find this prevents coning on the front tyre.
Also it will help support the top deck
the range off adjustment is 0 to 3 degrees, and have fitted the 2 degrees to my F1, I find this prevents coning on the front tyre.
Also it will help support the top deck
#73
F-ONE
In Radio Race Car there is a feature spread on the WRC F-ONE, 7 pages long
#74
Tech Regular
Hello I am interested in this car but donīt know the type/size tires it uses. Are they F103 size or F104? Or you can use booth tires without too much modifications?
I have seen one WRC One running Las Vegas IIC F1 using F104/RIDE rubber tires
Regards
I have seen one WRC One running Las Vegas IIC F1 using F104/RIDE rubber tires
Regards
#75
The front axle is 5mm diameter and the rear is the standard 14mm hex found on most F1s