Go Back  R/C Tech Forums > General Forums > Electric On-Road
Quietest 64 pitch spur/pinion combo? >

Quietest 64 pitch spur/pinion combo?

Quietest 64 pitch spur/pinion combo?

Old 08-29-2004, 12:24 PM
  #1  
Tech Master
Thread Starter
 
forty6's Avatar
 
Join Date: Dec 2002
Posts: 1,922
Default Quietest 64 pitch spur/pinion combo?

I am about to convert to 64 pitch gear and I want to know which brands are the smoothest and quietest. Thanks for your input.
forty6 is offline  
Old 08-29-2004, 12:30 PM
  #2  
Moderator
 
Speedo's Avatar
 
Join Date: Aug 2001
Posts: 3,435
Default

I have had very good luck with Kimbrough gears. I also have some Titanium Racing pinions, but I don't think they are quite as true as the Kimbroughs.

RW Racing spurs also work very well, I believe I have one on my car right now.

Josh

Last edited by Speedo; 08-29-2004 at 12:36 PM.
Speedo is offline  
Old 08-29-2004, 01:32 PM
  #3  
Tech Champion
 
Join Date: Aug 2001
Posts: 5,549
Default

RW racing spurs are awesome...they are extremely thin, and run noticeably straighter than other spurs i have run in the past

they really calmed down the noise in my tc3, and l4o
punkboy is offline  
Old 08-29-2004, 02:03 PM
  #4  
Tech Elite
iTrader: (3)
 
TeamButter's Avatar
 
Join Date: Dec 2002
Location: Florida
Posts: 2,802
Trader Rating: 3 (100%+)
Default

Also check out....http://www.precisionracingsystems.com/

They make some high quality lightened and super smooth Spurs and pinions.

You won't be dissapointed.

Mike A.
Teambutter
TeamButter is offline  
Old 08-29-2004, 02:21 PM
  #5  
Tech Champion
 
Join Date: Aug 2001
Posts: 5,549
Default

i think i have run those before too...they were nice, i just like the fact that the rw gears are the same size all the way through, keeping it as light as possible
punkboy is offline  
Old 08-29-2004, 03:26 PM
  #6  
Tech Champion
iTrader: (42)
 
John Tag's Avatar
 
Join Date: May 2004
Location: Huntersville, NC
Posts: 8,925
Trader Rating: 42 (100%+)
Default

I would never listen to a Punk
John Tag is offline  
Old 08-29-2004, 04:49 PM
  #7  
Tech Champion
 
Join Date: Aug 2001
Posts: 5,549
Default

TAG ur it!!!
punkboy is offline  
Old 08-29-2004, 04:53 PM
  #8  
Tech Master
 
wagonman72's Avatar
 
Join Date: Sep 2003
Location: Rancho Santa Margarita, CA
Posts: 1,090
Default

I have had a problem with the set screws pulling out the threads on the PRS pinions, I have never had that problem with Robinson pinions. I also use Kimbrough spurs,they are straight, hard, and true and he is a great guy and a great supporter of our hobby for many years now.
wagonman72 is offline  
Old 08-29-2004, 04:57 PM
  #9  
Tech Champion
 
Join Date: Aug 2001
Posts: 5,549
Default

kimbrough gears are nice, and very popular among most racers, but personally, i would prefer a machined gear over a molded gear, like the kimbrough gears...not sayin they are bad because they are molded, its just one thing i pay stupid attention to...
punkboy is offline  
Old 08-29-2004, 06:21 PM
  #10  
Tech Elite
iTrader: (26)
 
CRASH's Avatar
 
Join Date: Jan 2002
Posts: 2,717
Trader Rating: 26 (100%+)
Default Precision Racing Systems

PRS is definetly one of the best if not the best. I love the way you can run your mesh loose for stock. Super quiet and extremely durable.

The guys are also super nice and extremely helpfull.

Later,
CRASH is offline  
Old 08-30-2004, 04:38 AM
  #11  
V12
Tech Elite
iTrader: (1)
 
V12's Avatar
 
Join Date: Nov 2001
Posts: 2,656
Trader Rating: 1 (100%+)
Default

Hmm, I had the Kimborough gears in the past und yes they are very durable. But as they are molded they don´run very true and adjusting the gear mesh isn´t that easy.
I´m running Xenon gears now and like them a lot. The gears used on the HPI Pro4 or Yokomo SD also are Xenons.
Other than that I know enough people using the machined RW´s and the Robinson Racing Ultra spur (also machined) I used with my TC3 was very good.

For pinions I like the RW´s and Trinity Kinwald´s the most.
V12 is offline  

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright © 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.