Ko Propo VFS-1 ESC
#346
Tech Elite
iTrader: (16)
Re: Scotcky diode
Originally posted by Assasin
Hey guys, I just bought from a froend a VFs-1 Esc but it did not came with the ultimate scotchky diode.
What other options do I have? I am running 23T can I use the Novak scotchky diode?
Hey guys, I just bought from a froend a VFs-1 Esc but it did not came with the ultimate scotchky diode.
What other options do I have? I am running 23T can I use the Novak scotchky diode?
#347
rocketron- thanks for the info
ngo 8 - I am going to order but I want something that I can use fr the moment
ngo 8 - I am going to order but I want something that I can use fr the moment
#349
ok thanks dude .
#350
Tech Fanatic
iTrader: (1)
Join Date: May 2003
Location: Was in Toledo, OH now Battle Ground, WA
Posts: 833
Trader Rating: 1 (100%+)
I read through seven pages and decided that was way too much reading for me. I am looking for a good set-up for 1/12 stock. I went to the KO web page and they don't have one yet. I was running a LRP and I like the feel better, but I would rather run the KO. Any help would be great.
#351
Originally posted by mcsquish
I read through seven pages and decided that was way too much reading for me. I am looking for a good set-up for 1/12 stock. I went to the KO web page and they don't have one yet. I was running a LRP and I like the feel better, but I would rather run the KO. Any help would be great.
I read through seven pages and decided that was way too much reading for me. I am looking for a good set-up for 1/12 stock. I went to the KO web page and they don't have one yet. I was running a LRP and I like the feel better, but I would rather run the KO. Any help would be great.
mark..can you post your throttle profile please?
i wish i could help but i dont run 12th scale.... (yet. ROBERT lets run 12th scale on tuesdays! )
#352
Tech Elite
iTrader: (4)
Mcsquish
Here is the 1/12 scale setup I've been using for stock. If you have runtime issue which I don't think you will, increase the frequency numbers in the last 6 stages of the profile.
Please do me a favor and let us know what you think. It's important so that we can fine tune some of these profiles and make them available.
Hope this helps,
Mark
Here is the 1/12 scale setup I've been using for stock. If you have runtime issue which I don't think you will, increase the frequency numbers in the last 6 stages of the profile.
Please do me a favor and let us know what you think. It's important so that we can fine tune some of these profiles and make them available.
Hope this helps,
Mark
#353
Originally posted by munrath
Mcsquish
Here is the 1/12 scale setup I've been using for stock. If you have runtime issue which I don't think you will, increase the frequency numbers in the last 6 stages of the profile.
Hope this helps,
Mark
Mcsquish
Here is the 1/12 scale setup I've been using for stock. If you have runtime issue which I don't think you will, increase the frequency numbers in the last 6 stages of the profile.
Hope this helps,
Mark
#354
Tech Elite
iTrader: (4)
Chris,
The track size is 96x52. The straightaway is around 80 feet and the track is technical.
http://www.rctrack.com/images/facility/track2.jpg
The picture above is an older layout but the back straightaway is about the same.
Mark
The track size is 96x52. The straightaway is around 80 feet and the track is technical.
http://www.rctrack.com/images/facility/track2.jpg
The picture above is an older layout but the back straightaway is about the same.
Mark
Last edited by munrath; 11-03-2004 at 05:30 PM.
#355
Tech Elite
iTrader: (4)
Mcsquish,
Looks like Robert updated the web page and has posted my 1/12 scale profile for a technical track layout. He has also posted a Highspeed layout that someone has recommended.
Here is the link for VFS-1 Profiles.
http://www.kopropo.com/vfs_help.htm
Hope this helps,
Mark
Looks like Robert updated the web page and has posted my 1/12 scale profile for a technical track layout. He has also posted a Highspeed layout that someone has recommended.
Here is the link for VFS-1 Profiles.
http://www.kopropo.com/vfs_help.htm
Hope this helps,
Mark
Last edited by munrath; 11-04-2004 at 04:06 AM.
#356
Tech Fanatic
iTrader: (1)
Join Date: May 2003
Location: Was in Toledo, OH now Battle Ground, WA
Posts: 833
Trader Rating: 1 (100%+)
Thank you very much. I will hopefuly be able to try it this weekend at the NORRCA nats.
#357
Originally posted by munrath
Chris,
The track size is 96x52. The straightaway is around 80 feet and the track is technical.
http://www.rctrack.com/images/facility/track2.jpg
The picture above is an older layout but the back straightaway is about the same.
Mark
Chris,
The track size is 96x52. The straightaway is around 80 feet and the track is technical.
http://www.rctrack.com/images/facility/track2.jpg
The picture above is an older layout but the back straightaway is about the same.
Mark
FREQ1=1
FREQ2=2
FREQ3=2
FREQ4=3
FREQ5=4
FREQ6=4
FREQ7=5
FREQ8=5
FREQ9=6
FREQ10=7
FREQ11=8
FREQ12=9
FREQ13=10
FREQ14=11
FREQ15=12
FREQ16=13
FREQ17=14
FREQ18=13
FREQ19=12
FREQ20=11
FREQ21=10
FREQ22=9
FREQ23=8
FREQ24=8
FREQ25=8
FREQ26=8
FREQ27=8
FREQ28=9
FREQ29=10
FREQ30=11
FREQ31=12
ill PM you the other one. i think its too aggressive..and might get you to dump. im actually gonna use it in stock for my touring car.
#359
Originally posted by munrath
Chris,
The top end is pretty good, but I'm always up for trying something different. I'm going to the track Friday to do some more testing so I'll try it out and let you know.
Nothing came through on the PM. Try again.
Thanks for all the support.
Mark
Chris,
The top end is pretty good, but I'm always up for trying something different. I'm going to the track Friday to do some more testing so I'll try it out and let you know.
Nothing came through on the PM. Try again.
Thanks for all the support.
Mark