R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

Reply
 
Thread Tools Search this Thread
Old 10-04-2004, 02:01 PM   #256
V12
Tech Elite
 
V12's Avatar
 
Join Date: Nov 2001
Posts: 2,641
Trader Rating: 1 (100%+)
Default

Hugo
Hope to meet you there. Will send you PM before that race, if I donīt forget. What car will you be running there?
__________________
Classic RC - http://classicrc.wordpress.com/
V12 is offline   Reply With Quote
Old 10-04-2004, 02:06 PM   #257
Tech Regular
 
Join Date: Jun 2003
Posts: 483
Trader Rating: 1 (100%+)
Default

I hope I'll meet you there, I'll be running the 415!
PM me if you have a good setup for this track cause i never went there.

Bye
Hugo is offline   Reply With Quote
Old 10-04-2004, 02:11 PM   #258
V12
Tech Elite
 
V12's Avatar
 
Join Date: Nov 2001
Posts: 2,641
Trader Rating: 1 (100%+)
Default

Donīt know exactly yet, Iīm running the 415 or maybe the old and proven EVO III there. I donīt have any special setup Iīm running similar setup usually. Just the handout tires are different but I donīt know what they will use this year.
Maybe will be just the 2. nd race with the 415.
__________________
Classic RC - http://classicrc.wordpress.com/
V12 is offline   Reply With Quote
Old 10-04-2004, 10:41 PM   #259
Tech Master
 
Join Date: Nov 2003
Location: land of mass unemployment
Posts: 1,313
Trader Rating: 14 (100%+)
Default

HarshGuy:

Hi,
Thanks that is what I was looking for. nice site BTW.

Hebiki:

Hi,

Also thanks. I was going to just set throttle hi point at 100. I will reset it to 150.

Where is a good place to buy a handheld adaptor from??? I don't get alot of screen time do to work. so again any help would be great. or any info on the laptop adaptor (hoping it is on a CD)

Thanks
__________________
Team Tekin, KoPropo, Power Push Batteries, Tempgun.com
PROTECT ME FROM THE THINGS I WANT.
THAT WHICH FEEDS ME DESTROYS ME.
Life is short - live it! Your only old when your dreams are replaced by regrets.
TimXLB is offline   Reply With Quote
Old 10-04-2004, 10:42 PM   #260
Tom
Tech Regular
 
Tom's Avatar
 
Join Date: Nov 2002
Location: Australia-mate
Posts: 349
Default

What do you look for when programing the frequency?

Does running a high final frequency improve top speed?

Is there a limit to how low you can set the frequency before you put the esc at risk?

Looking at 27 turn stock programing, but any advice information, insight or reasoning would be helpful.
Tom is offline   Reply With Quote
Old 10-04-2004, 11:33 PM   #261
Tech Lord
 
Hebiki's Avatar
 
Join Date: Aug 2003
Location: Chino, CA
Posts: 12,919
Trader Rating: 26 (100%+)
Default Your questions....

Quote:
Originally posted by Tom
What do you look for when programing the frequency?

Does running a high final frequency improve top speed?

Is there a limit to how low you can set the frequency before you put the esc at risk?

Looking at 27 turn stock programing, but any advice information, insight or reasoning would be helpful.

YGPM
__________________
Hebiki Design Works
Custom R/C Vinyl Graphics & Apparel: Your gear, your way!
Web Design - Web Development - Logo Design - Graphic Design
www.facebook.com/HebikiDesignWorks
Hebiki is offline   Reply With Quote
Old 10-04-2004, 11:45 PM   #262
Tech Lord
 
Hebiki's Avatar
 
Join Date: Aug 2003
Location: Chino, CA
Posts: 12,919
Trader Rating: 26 (100%+)
Default

Quote:
Originally posted by TimXLB
Where is a good place to buy a handheld adaptor from??? I don't get alot of screen time do to work. so again any help would be great. or any info on the laptop adaptor (hoping it is on a CD)

Thanks
try the for sale forums on here.. or ebay

as for the PC interface, they're available at the Ko Propo site on shopatron
__________________
Hebiki Design Works
Custom R/C Vinyl Graphics & Apparel: Your gear, your way!
Web Design - Web Development - Logo Design - Graphic Design
www.facebook.com/HebikiDesignWorks
Hebiki is offline   Reply With Quote
Old 10-05-2004, 07:08 AM   #263
Tech Elite
 
HarshGuy's Avatar
 
Join Date: Aug 2001
Location: Roseville, CA
Posts: 3,379
Trader Rating: 6 (100%+)
Default

Quote:
Originally posted by TimXLB
HarshGuy:



Where is a good place to buy a handheld adaptor from??? I don't get alot of screen time do to work. so again any help would be great. or any info on the laptop adaptor (hoping it is on a CD)

Thanks
I've got mine up for sale on Ebay ...I replaced all my electronics withe newer KO electronics: Click Here
__________________
http://www.arroyoc.com
http://www.gearchart.com
http://www.weracemountainbikes.com
HarshGuy is offline   Reply With Quote
Old 10-05-2004, 07:09 AM   #264
Tech Elite
 
HarshGuy's Avatar
 
Join Date: Aug 2001
Location: Roseville, CA
Posts: 3,379
Trader Rating: 6 (100%+)
Default

Quote:
Originally posted by TimXLB
HarshGuy:

Hi,
Thanks that is what I was looking for. nice site BTW.

Thanks ...glad that helped
__________________
http://www.arroyoc.com
http://www.gearchart.com
http://www.weracemountainbikes.com
HarshGuy is offline   Reply With Quote
Old 10-05-2004, 08:41 PM   #265
Tech Master
 
ngo8's Avatar
 
Join Date: Apr 2003
Location: Winnipeg Manitoba Canada
Posts: 1,264
Send a message via ICQ to ngo8
Default

hey ko staff i noticed on the vfs 2000 you had to add on a couple of big capacitors which took alot of room on the car is this the case with the vfs-1?
__________________
Xray|ORCA|Sanwa|Trinity|KoPropo
ngo8 is offline   Reply With Quote
Old 10-06-2004, 02:05 AM   #266
Tech Initiate
 
Join Date: Aug 2003
Posts: 34
Default Actual Freq. and Freq. No. Cross Reference

Hi KO Staff,

I have bought the VFS-1 yesterday and is still studying all the manuals including the setting card, the setting adaptor and some of the sample setting sheets from both KO USA and Japan website. During my study, I find out that the relationship between the actual frequency and the frequency no. in the setup sheet is not linear. The difference is listed below. Could you lead me to the documentation of the cross reference of the actual freq. and freq. no.

Freq. (No.) Difference
1.31 (10) - 0.93 (1) 0.38
2.03 (20) - 1.31 (10) 0.72
3.12(30) - 2.03(20) 1.09
4.57 (40) - 3.12 (30) 1.45
7.14 (50) - 4.57 (40) 2.57
9.98 (60) - 7.14 (50) 2.84

May I also have your enlightenment on this setting such as the reason why and the benefits gained.

Just want to learn more. Thanks in advance.

Regards,
Kenny
kennykay is offline   Reply With Quote
Old 10-06-2004, 08:12 PM   #267
Tech Master
 
=MisFitz= NuKe's Avatar
 
Join Date: Apr 2003
Posts: 1,058
Send a message via AIM to =MisFitz= NuKe Send a message via Yahoo to =MisFitz= NuKe
Default

Quote:
Originally posted by ngo8
hey ko staff i noticed on the vfs 2000 you had to add on a couple of big capacitors which took alot of room on the car is this the case with the vfs-1?
NGO,
No, this is not the case with the VFS-1 Pro. The new speedo is very nice. You only need the one short capacitor and the one new and improved schottky diode, and that is it.
-Mike
=MisFitz= NuKe is offline   Reply With Quote
Old 10-06-2004, 09:07 PM   #268
Tech Master
 
ngo8's Avatar
 
Join Date: Apr 2003
Location: Winnipeg Manitoba Canada
Posts: 1,264
Send a message via ICQ to ngo8
Default

wicked thats the only reason why i dont have now i have to try it .
__________________
Xray|ORCA|Sanwa|Trinity|KoPropo
ngo8 is offline   Reply With Quote
Old 10-10-2004, 09:05 PM   #269
Tech Initiate
 
Join Date: Aug 2003
Posts: 34
Default Re: Actual Freq. and Freq. No. Cross Reference

Quote:
Originally posted by kennykay
Hi KO Staff,

I have bought the VFS-1 yesterday and is still studying all the manuals including the setting card, the setting adaptor and some of the sample setting sheets from both KO USA and Japan website. During my study, I find out that the relationship between the actual frequency and the frequency no. in the setup sheet is not linear. The difference is listed below. Could you lead me to the documentation of the cross reference of the actual freq. and freq. no.

Freq. (No.) Difference
1.31 (10) - 0.93 (1) 0.38
2.03 (20) - 1.31 (10) 0.72
3.12(30) - 2.03(20) 1.09
4.57 (40) - 3.12 (30) 1.45
7.14 (50) - 4.57 (40) 2.57
9.98 (60) - 7.14 (50) 2.84

May I also have your enlightenment on this setting such as the reason why and the benefits gained.

Just want to learn more. Thanks in advance.

Regards,
Kenny
Hi KO Propo Staff,

May be I am not writing the exact name so that you do not give me any response on my question. A little bit disappointed.

For the documentation on cross reference between the frequency no. and the acutal frequency, I have already figured it out by copying them from the setting adaptor. What a painful job to copy 64 readings (pressing the button on the adaptor and jotting down the figures)

For the enlightenment on the frequency curve, it may be your commercial decision that it could not be shared. In that sense, I think it is understandable.

For those who are using the VFS-1, you can find below each frequency no. against actual frequency. Happy to share.

Freq. No Actual Freq. (in kHz)
1 - 0.93
2 - 0.97
3 - 1.00
4 - 1.03
5 - 1.07
6 - 1.11
7 - 1.16
8 - 1.20
9 - 1.25
10 - 1.31
11 - 1.37
12 - 1.45
13 - 1.52
14 - 1.61
15 - 1.70
16 - 1.80
17 - 1.85
18 - 1.92
19 - 1.98
20 - 2.03
21 - 2.10
22 - 2.19
23 - 2.28
24 - 2.37
25 - 2.47
26 - 2.58
27 - 2.70
28 - 2.81
29 - 2.96
30 - 3.12
31 - 3.29
32 - 3.45
33 - 3.62
34 - 3.73
35 - 3.86
36 - 3.98
37 - 4.14
38 - 4.27
39 - 4.42
40 - 4.57
41 - 4.80
42 - 4.97
43 - 5.20
44 - 5.41
45 - 5.71
46 - 5.96
47 - 6.30
48 - 6.63
49 - 6.93
50 - 7.14
51 - 7.28
52 - 7.51
53 - 7.85
54 - 8.07
55 - 8.34
56 - 8.68
57 - 8.98
58 - 9.35
59 - 9.60
60 - 9.98
61 - 10.60
62 - 10.88
63 - 11.45
64 - 12.00
kennykay is offline   Reply With Quote
Old 10-10-2004, 09:09 PM   #270
Tech Elite
 
jeffreylin's Avatar
R/C Tech Charter Subscriber
 
Join Date: Nov 2003
Location: Traction Roll!
Posts: 2,564
Default

Kenny, Robert might be out on a business trip and that's why he has not responded. I am sure he will answer as soon as he sees your post.
jeffreylin is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
KO PROPO BMC-VFS esc Molala3 Electric On-Road 0 04-23-2008 11:57 AM
KO PROPO VS-1 FS/FT Headshot R/C Items: For Sale/Trade 5 11-11-2007 06:16 PM
ko propo buffalobill989 R/C Items: Wanted to Buy 2 08-09-2006 05:08 AM
~F/S Ko Propo Mars R/Ko Propo VFS 2000 Pro/BMI FK05~ RandomTask R/C Items: For Sale/Trade 5 06-21-2006 10:18 PM
WTB Ko Propo VFS-1 Pro Roberto Falcon R/C Items: Wanted to Buy 5 10-22-2005 11:36 AM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 09:13 PM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net