R/C Tech Forums - Novak havoc issues

Quote:

Originally Posted by poppa_duce (Post 8528851)

New to the forum, lots of great info here.After being away from the hobby for a long time, I got back in. The guy at LHS talked me into the Havoc 3S instead of Valenion sytem.Installed in a older RC-R10 and got every bit of 30 seconds of run time. Died in the street, No LEDs. Forgive my ignorance, but is it graveyard dead or is there a reset?

Many times the problem you are experiencing will have an easy fix and you will not need to return your product for service. Unless you include the info below, we may not be able to assist you by email. Please email [email protected] with your question, Our regular CS/Tech Support hours can be located here. Before emailing, take a moment to review the instructions (trouble-shooting guide) originally included with your Novak Item:

Novak Instruction Downloads

Quote:

Please make your initial email as detailed as possible. Include:

~ speed control (brand/model)
~ motor (brand/wind)
~ number/type of cells
~ battery, brand (c rating/capacity
~ rotor (old/new)
~ connectors used
~ servo (brand/model)
~ radio system (receiver/transmitter)
~ vehicle & gearing
~ warranty claim?
~ lipo cut-off, on/off
~ any external modules (BEC/brand, Glitch Buster)
~ other important info: water damage, corrosive chemical sprays, excess heat, etc

The more information you provide in your first email, the more quickly tech support can offer you assistance; without his information, diagnosing your problem is practically impossible. You can PM me if you want additional assistance.

Video: How to Clean Your BL Motor

Trouble-shooting TeamNovak's One Touch™ Speed Controls