Team Corally RDX Touring Car

You're on Page 82 of 705
Go to
  • RDX Body
    Re: Alfa Body
    I'm thinking of trying a different body on my RDX rather than the Parma Alfa. Has anyone used the new Protoform Stratus 3.0.
    I just picked one up this weekend so see how it fits.

    FYI-the pre drawn wheel wells fit exactly on the RDX (if you use one clip on each side of the arm) and the hood of the body complensates for the shocktower (ie. no shocktower modification necessary to slam the body).

    Does anyone have any comments? Thanks!
  • i used a 3.0 last weekend... worked well on concrete, and i used it on carpet in january on a different chassis...

    they say its supposed to be a good carpet body.
  • Has anyone tryed the lowered suspension blocks on the front only to improve turn in? Is there a better way to improve low speed cornering?
  • At the snowbirds all the modified drivers were running optional blocks in the front and stock roll blocks in the rear.

    Jeff
  • Quote:
    Originally posted by ukeejim
    Has anyone tryed the lowered suspension blocks on the front only to improve turn in? Is there a better way to improve low speed cornering?
    I like the mid ackermann position the best and less caster (4 deg w/ antidive.) YOu cant try that. I never never tried the LRC blocks so I cannot comment on those.

    Ray
  • so they were running the #1 position low block in front, and the #1 position stock block in rear?

    just curious, as i am heading to a track this weekend that uses the same carpet as the 'birds.... although, not mod, prolly 19T and stock.
  • I've tried the stock blocks in the front (#! position), the low blocks in the front (#1) position and I've also tried the low/stock block combo to get anti-dive. On a low to medium bite track with tight corners I've found the low blocks provide the best stearing(fastest lap times also...).
  • Roll Center Numbers
    The numbers for roll centers only relate to the stock blocks in the car. Positions 1 & 2 are for the bottom holes and Positions 3 & 4 for the upper holes. Positions 2 & 4 refer to the blocks being flipped.

    The optional blocks are not a number, technically it would be like a 0. So, in that case we were running 0 all around in the front and 1 all around in the rear.

    Jeff
  • gotcha.. last time i was on foam/carpet, i was running 0 all around, then. low blocks, all flipped. i may try the rear up this time. thanks!!!
  • what are block when you put them on the top of the car ha
  • Anyone know if the 4mm chassis and 3.5mm top deck part numbers and availability? Also where do you guy mesure your droop settings?
    This chassis is just awsome,many local guys have a hard time to folow me it's just so dialed.
  • dont want to be redudant but please help me out......need info because am planning to get new kit.....

    what are the strengths of the RDX?

    how is it compared to the xray, 415 or the new losi...

    your input will be highly appreciated.
  • Man I got my 4mm chassis for the RDX last night.......SWEET!!!....
  • Quote:
    Originally posted by The Teacher
    Man I got my 4mm chassis for the RDX last night.......SWEET!!!....
    Post a few pics if you can!!

Similar Threads