Team Corally RDX Touring Car
#6948
Tech Elite
iTrader: (10)
Page 2? What's up with that?
Bump.
For anyone that races in the midwest (or anywhere else, for that matter), if you haven't heard about the Stock Rubber Tire Touring Nationals at trackside at the end of this month, check out the thread in this forum. It's going to be a blast and there will be many Corally drivers (myself, Brian Lutz, Jeff Brown, Brian Koch, Mike Nelson) attending.
Bump.
For anyone that races in the midwest (or anywhere else, for that matter), if you haven't heard about the Stock Rubber Tire Touring Nationals at trackside at the end of this month, check out the thread in this forum. It's going to be a blast and there will be many Corally drivers (myself, Brian Lutz, Jeff Brown, Brian Koch, Mike Nelson) attending.
#6949
If anyone is looking for an RDX - selling mine, comes with 4mm and 3.4mm chassis, low roll centre blocks, lots and lots and lots of NIP spares including 2 complete NIP diffs, aluminum steering knuckles...can send pics monday
http://www.rctech.net/forum/showthre...74#post2274574
http://www.rctech.net/forum/showthre...74#post2274574
#6950
Question about the Corally Motors
some of us at her track use the Corally 19t motor!! and like 2 of 3 guys running them !! burn the motor and i know they not the only one and other guys here have the same experience whit it but they have that didnt burn!!!
my question is why the corally 19t motor burning?? it is overgeared or just not a good batch???
cause i want to try one but i dont want to waste 50$
Later!!
some of us at her track use the Corally 19t motor!! and like 2 of 3 guys running them !! burn the motor and i know they not the only one and other guys here have the same experience whit it but they have that didnt burn!!!
my question is why the corally 19t motor burning?? it is overgeared or just not a good batch???
cause i want to try one but i dont want to waste 50$
Later!!
#6952
Tech Fanatic
when we ran them we geared them more like a chamelon for our track like 6.0 or 6.2 hope thes helps later jason
#6953
hey jason it is like a big track?? how long the straigth is??
#6954
Tech Elite
iTrader: (74)
race
Originally Posted by Brian McGreevy
Page 2? What's up with that?
Bump.
For anyone that races in the midwest (or anywhere else, for that matter), if you haven't heard about the Stock Rubber Tire Touring Nationals at trackside at the end of this month, check out the thread in this forum. It's going to be a blast and there will be many Corally drivers (myself, Brian Lutz, Jeff Brown, Brian Koch, Mike Nelson) attending.
Bump.
For anyone that races in the midwest (or anywhere else, for that matter), if you haven't heard about the Stock Rubber Tire Touring Nationals at trackside at the end of this month, check out the thread in this forum. It's going to be a blast and there will be many Corally drivers (myself, Brian Lutz, Jeff Brown, Brian Koch, Mike Nelson) attending.
#6955
Originally Posted by Customworksking
I will be there !!!
I thought you were trying to trade your rdx for a T2 ?
#6956
Tech Fanatic
Originally Posted by T1Raycer
hey jason it is like a big track?? how long the straigth is??
#6957
I got a quick question for you Mr. Ertrachter,
I'm just curious to why your IIC setup uses the HPI springs as opposed to Corally springs. Is this because you wanted to fine tune the spring rates to a point that was "in-between" the Corally spring rates, or does it have to with the progressive-ness of the spring....or...is it because those were the only springs you had on hand when you setup the car?
Thanks
-Dan
I'm just curious to why your IIC setup uses the HPI springs as opposed to Corally springs. Is this because you wanted to fine tune the spring rates to a point that was "in-between" the Corally spring rates, or does it have to with the progressive-ness of the spring....or...is it because those were the only springs you had on hand when you setup the car?
Thanks
-Dan
#6958
Yesterday was an awsome day. Came second in Stock A and the car was solid . We went through Rain,Hail,Sun all in the same day was good fun tho. But i was stuggling a bit on corner speed...that is going into off an on the Accellerator any tips?
#6960
jeff you have a PM
Thanks,
D.C.
Thanks,
D.C.