R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric On-Road

Reply
 
Thread Tools Search this Thread
Old 01-20-2006, 11:01 AM   #5206
Tech Elite
 
Customworksking's Avatar
 
Join Date: Oct 2004
Location: Springfield ILLINOIS
Posts: 3,639
Trader Rating: 73 (100%+)
Post super low

Quote:
Originally Posted by RCFREAK
CUSTOMWORKS......im glad you got your RDX all hooked up!! i still have my second car. and it still is running great. a while ago you were interested in my first kit i had for sale... glad things are going well with your RDX!! keep it up, it only gets better!!! i tried a standard rear low roll center in the car with ultra lows in the front... that actually frees up the car more in the rear.. i almost always run it that way nowadays.
When I got my rdx I was told that it has the super low blocks on it but I'm not sure if it does or not because as it sits now from the bottom of the block to the top of the chassis theres about 1.5mm between the block and the top of the chassis so, are the super low blocks even lower or are they the right blocks ? any help will do thanks
__________________
Team Xray | RC America| Hudy |Jaco |AKA
Customworksking is offline   Reply With Quote
Old 01-20-2006, 11:09 AM   #5207
Tech Elite
 
Turbonium's Avatar
 
Join Date: Feb 2003
Location: Oklahoma
Posts: 2,302
Trader Rating: 27 (100%+)
Send a message via Yahoo to Turbonium
Default

if i remember right, the ultra-low blocks sit right on the lower deck, barely any gap at all. someone else might be able to be more exact till i get home and look at my foam tire car....
__________________
Wes

Team Novak
Turbonium is offline   Reply With Quote
Old 01-20-2006, 11:11 AM   #5208
Tech Elite
 
Brian McGreevy's Avatar
R/C Tech Charter Subscriber
 
Join Date: Jan 2003
Location: Illinois
Posts: 4,081
Trader Rating: 10 (100%+)
Send a message via AIM to Brian McGreevy Send a message via Yahoo to Brian McGreevy
Default

No there is at least 1 mm of air under the blocks...probably more like 1.5. I've never measured that.
__________________
USVTA Member #211

Support Formula SAE - get kids into engineering!
http://motorsports.illinois.edu/
Brian McGreevy is offline   Reply With Quote
Old 01-20-2006, 11:47 AM   #5209
Tech Addict
 
Big Rigg's Avatar
 
Join Date: Dec 2004
Location: Los Angeles
Posts: 574
Default

Is the www.corallyusa.com site down? What's the phone number so I could call and make an order?
Thanks!
__________________
[url=http://www.corallyusa.com/][color=Red]- Corraly USA -[/color][/url]
[url=http://www.corallyusa.com/specializedrc/index.htm/][color=Red]- Specialized R/C -[/color][/url]
[url=http://www.thunderrc.com/eshop/][color=DarkRed]- Team Thunder RC -[/color][/url]
[url=http://www.cfxpaintworks.com/][color=DarkOrange]- CFX Paintworks -[/color][/url]
[COLOR=DarkSlateGray]- Team Ertrachter Factor - [/COLOR]
If my last name were Oxlong, I would name my kid Mike... yup Mike Oxlong
-Heywood Jablome

I don't want to pay for my sig, so yawl figure it out...
Big Rigg is offline   Reply With Quote
Old 01-20-2006, 12:16 PM   #5210
Tech Elite
 
Brian McGreevy's Avatar
R/C Tech Charter Subscriber
 
Join Date: Jan 2003
Location: Illinois
Posts: 4,081
Trader Rating: 10 (100%+)
Send a message via AIM to Brian McGreevy Send a message via Yahoo to Brian McGreevy
Default

Go here http://www.corallyusa.com/2005/core.htm

The number is 407-681-5905
__________________
USVTA Member #211

Support Formula SAE - get kids into engineering!
http://motorsports.illinois.edu/
Brian McGreevy is offline   Reply With Quote
Old 01-20-2006, 12:59 PM   #5211
Tech Master
 
Join Date: Aug 2002
Location: Nor-Cal
Posts: 1,853
Trader Rating: 18 (100%+)
Default

Quote:
Originally Posted by Big Rigg
Is the www.corallyusa.com site down? What's the phone number so I could call and make an order?
Thanks!
I can't resolve the name so I would think it is a DNS issue.......

Anybody have an IP address for the server?
__________________
SMC ( www.smc-racing.com the only place to order your batteries online.), Awesomatix, Gonzo Paints, BN Racing

"Imitation is the sincerest form of flattery."
Advil is offline   Reply With Quote
Old 01-20-2006, 01:38 PM   #5212
Tech Elite
 
HarshGuy's Avatar
 
Join Date: Aug 2001
Location: Roseville, CA
Posts: 3,379
Trader Rating: 6 (100%+)
Default

Quote:
Originally Posted by Advil
I can't resolve the name so I would think it is a DNS issue.......

Anybody have an IP address for the server?
yea

206.get.over.it.they.must.be.down
__________________
http://www.arroyoc.com
http://www.gearchart.com
http://www.weracemountainbikes.com
HarshGuy is offline   Reply With Quote
Old 01-20-2006, 06:14 PM   #5213
Tech Master
 
Jeff Brown's Avatar
 
Join Date: Nov 2003
Location: Orlando, FL
Posts: 1,913
Default

Yeah, I called our server people. Apparently someone out in the Nevada desert decided to try and steal some Fiber Optic cable, about 1000FT of it. Problem was it was buried in the ground so their pickup truck seemed like a good option to yank it out.

I think it took down like a wide scale regional area for the Sprint network. Idle hands I tell ya......

Jeff
__________________
SXT Traction Compounds | www.TractionCompound.com
Jeff Brown is offline   Reply With Quote
Old 01-20-2006, 08:21 PM   #5214
Tech Elite
 
HarshGuy's Avatar
 
Join Date: Aug 2001
Location: Roseville, CA
Posts: 3,379
Trader Rating: 6 (100%+)
Default

Quote:
Originally Posted by Jeff Brown
Yeah, I called our server people. Apparently someone out in the Nevada desert decided to try and steal some Fiber Optic cable, about 1000FT of it. Problem was it was buried in the ground so their pickup truck seemed like a good option to yank it out.

I think it took down like a wide scale regional area for the Sprint network. Idle hands I tell ya......

Jeff
Nice ...probably a couple of dudes with missing teeth and banjos.
__________________
http://www.arroyoc.com
http://www.gearchart.com
http://www.weracemountainbikes.com
HarshGuy is offline   Reply With Quote
Old 01-20-2006, 08:40 PM   #5215
Tech Champion
 
Matt Howard's Avatar
 
Join Date: Aug 2001
Location: Abilene TX
Posts: 5,952
Trader Rating: 6 (100%+)
Default

Quote:
Originally Posted by HarshGuy
Nice ...probably a couple of dudes with missing teeth and banjos.
so that's where scotty and dal went the other day
__________________
Official member of The Guild of Calamitous Intent and proud supporter of Conjectural Technologies.
Serpent S411 LE kit #192
RCTech #361
Matt Howard is offline   Reply With Quote
Old 01-20-2006, 10:35 PM   #5216
Tech Master
 
Soviet's Avatar
 
Join Date: May 2004
Location: Littleton, CO - USA
Posts: 1,708
Trader Rating: 2 (100%+)
Default

So whats the story on the RDX??? Is there a new "upgrade" kit coming out for it or what?!?! Inquiring minds WANT to know!
__________________
"You don't get hurt racing little cars..."

-Me
Soviet is offline   Reply With Quote
Old 01-20-2006, 11:41 PM   #5217
Tech Master
 
Jeff Brown's Avatar
 
Join Date: Nov 2003
Location: Orlando, FL
Posts: 1,913
Default

Quote:
Originally Posted by Soviet
So whats the story on the RDX??? Is there a new "upgrade" kit coming out for it or what?!?! Inquiring minds WANT to know!
You don't pay attention do you. heh. Same dialed RDX. No "upgrade" kit. No need for it.

Jeff
__________________
SXT Traction Compounds | www.TractionCompound.com
Jeff Brown is offline   Reply With Quote
Old 01-21-2006, 01:46 AM   #5218
Tech Master
 
Soviet's Avatar
 
Join Date: May 2004
Location: Littleton, CO - USA
Posts: 1,708
Trader Rating: 2 (100%+)
Default

Quote:
Originally Posted by Jeff Brown
You don't pay attention do you. heh. Same dialed RDX. No "upgrade" kit. No need for it.

Jeff

Actually I've been busy for the last week or two...I thought there was somthing coming out for the car that would address arm breakage...

Hmm...so the whole "suprise" was just Ti screws and a motor guard??? Hmm...letdown.
__________________
"You don't get hurt racing little cars..."

-Me
Soviet is offline   Reply With Quote
Old 01-21-2006, 07:39 AM   #5219
Tech Adept
 
Mission_carbon's Avatar
 
Join Date: Aug 2004
Location: U.K BRISTOL
Posts: 209
Default

Why would you need a "upgrade" kit if the RDX is fine as it is like Jeff said? . Pointless really....we dont want to be like Xray bringing out the FK05 then shortly the T2

No need.

Will Olpin
Mission_carbon is offline   Reply With Quote
Old 01-21-2006, 09:04 AM   #5220
Tech Adept
 
FBJ's RDX's Avatar
 
Join Date: Dec 2005
Location: Soon to be in the Darkside
Posts: 176
Default

Jeff Brown: Hi Jeff, I would like to know what the effect would be if I make my rear roll center 2 & 2 on the rear bulk head? Will it give more initial rear traction upon entering a corner? Or would it add to over all steering? Thank you.
FBJ's RDX is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Corally CCT Pan-touring car biker R/C Items: For Sale/Trade 4 03-02-2010 09:21 PM
Corally CCT Pan touring car biker R/C Items: For Sale/Trade 3 11-05-2003 07:24 AM
Corally F1 w/touring car setup froghead R/C Items: For Sale/Trade 6 10-29-2003 08:10 PM
New Corally Touring Car At Nurnberg JANTLE Electric On-Road 117 04-30-2003 05:23 AM
Brand New Corally C4.1 Touring Car HauntedMyst R/C Items: For Sale/Trade 5 10-25-2002 08:40 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 11:53 AM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net