Set-up Board Ideas
What are you guys using for set-up boards? Any homemade set-ups? Thanks
|
My local walmart sells glass cutting boards with a smooth side and a textured side. It has rubber corner protectors and is pretty big. They even make a smaller one if you like. I think it is like 13 dollars.
|
Originally Posted by andrewdoherty
(Post 8118245)
My local walmart sells glass cutting boards with a smooth side and a textured side. It has rubber corner protectors and is pretty big. They even make a smaller one if you like. I think it is like 13 dollars.
|
I use the integy board, it has the bubble level in the middle of the board. Makes life easy.
|
Pit board
|
|
$1.00 Menard's or other Home Depot ect........scrap counter top pieces. Just knock off edges and you are set.
|
Wal Mart large glass cutting board with the Integy sticker on it and Yeah Racing set up tools. Not as good as user friendly as the Hudy tools, but all told less than $40 invested
|
I went to Lowes and got a 24"x24" ceramic tile for about 8 bucks
|
A piece of scrap MDF with universal setup station
http://i882.photobucket.com/albums/a...1-B/th_010.jpg |
I'd like to get a piece of granite scrap from a counter top shop. Most likely from a kitchen counter top when they cut out the hole for the kitchen sink. I know granite is expensive, but what do they do with those cutouts?
I currently have a glass cutting board, but wanted to find something less fragile. MDF is cheap, but swells up and disintegrates when exposed to water. The acrylic ones look nice, but don't they get scratched easily, making it difficult to see the etched part underneath? |
Originally Posted by CarbonJoe
(Post 8119696)
I know granite is expensive, but what do they do with those cutouts?
|
Originally Posted by RossoTorro
(Post 8119288)
|
Originally Posted by audriusv
(Post 8120230)
What is exact dimensions of it?
|
Originally Posted by Potoczak
(Post 8118697)
I use the integy board, it has the bubble level in the middle of the board. Makes life easy.
|
Originally Posted by Potoczak
(Post 8118697)
I use the integy board, it has the bubble level in the middle of the board. Makes life easy.
Try this, get your integy board centered with the standard circle spirit level. Then get a normal spirit level, face it N-S, then W-E, and you will see how far out it is. surprised me too:eek: |
Hudy setup board. Every other cheaper option I looked at was never perfectly flat, some were near enough but the board on it's own isn't that expensive and is plenty durable enough to last year's or wrenching abuse.
|
Genesis Rc Products Pit Board
1 Attachment(s)
Brandon can put whatever you want on the board. It is engraved on the bottom of the board so the top is still smooth!:)
|
Originally Posted by haywood
(Post 8135508)
Brandon can put whatever you want on the board. It is engraved on the bottom of the board so the top is still smooth!:)
www.genesisrcp.com Also here is it again! Brandon Skewes Phone: 507-828-8697 email: [email protected] let me know what i can do. Thanks Haywood! |
Originally Posted by bjs227
(Post 8135904)
My contact info is on the website
www.genesisrcp.com Also here is it again! Brandon Skewes Phone: 507-828-8697 email: [email protected] let me know what i can do. Thanks Haywood! |
Originally Posted by slashman4x4
(Post 8136039)
That is very kool..
Thanks |
BJS227
Very impressed.. Do you ship to Canada?
|
Genesis Rc Products
Guys Brandon is a great guy and a fellow racer so if you need a board pick one up! He also makes some killer trophies also.:nod:
|
zleader you have a PM!
|
Pit boards
:batman:
|
Oh Yea
Brandons boards are kick butt - very cool and priced right - and fast turn around -
Great guy to deal with - we need more of those guys in our hobby! Bryan |
Originally Posted by tnrccar
(Post 8156995)
Brandons boards are kick butt - very cool and priced right - and fast turn around -
Great guy to deal with - we need more of those guys in our hobby! Bryan |
2 Attachment(s)
Here is a sample of a pitboard and car stand of a customers to be shipped to Australia!
http://www.genesisrcraceway.com/products.html |
you can use perspex or laminated chipboard
|
All times are GMT -7. It is currently 10:33 PM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.