2LikesXray T3 2011
10-13-2010, 10:17 PM
#451
Originally Posted by PDX-Spike
Hey Patrick. You been talkin' about racing for a long time and haven't seen you for quite awhile. When you gonna show up at TZII to race?
, I am an engineering student AND I am racing BIG cars. So lil cars aren't the number one priority. I will give you a ride in my street car and you might understand better lol. I am waiting on my T3 2011 to show up and then I will be out to race again this carpet season. I got spoiled in socal with nice tracks and high grip. Racing nitro with no grip is less fun. But I will be back for carpet season like last year You should get a rubber tire sedan and come play with the big kids lol. I was thinkin about goin to the TZ Grand Prix but I had no touring car. I usually get rid of my cars mid asphalt season and wait out the new car. You haven't even raced me yet so I don't know why your in a hurry for me to come back. You run those lil pancars lol. I have bodies painted up and ready to cut out. I will have a car within the next three weeks or so depending on customs / my car budget. With my classes its work to get a 3.3gpa.
10-14-2010, 02:52 AM
#452
Arrived !
10-14-2010, 09:44 AM
#453
Originally Posted by rx7ttlm
You missed it the last time I raced , I am an engineering student AND I am racing BIG cars. So lil cars aren't the number one priority. I will give you a ride in my street car and you might understand better lol. I am waiting on my T3 2011 to show up and then I will be out to race again this carpet season. I got spoiled in socal with nice tracks and high grip. Racing nitro with no grip is less fun. But I will be back for carpet season like last year You should get a rubber tire sedan and come play with the big kids lol. I was thinkin about goin to the TZ Grand Prix but I had no touring car. I usually get rid of my cars mid asphalt season and wait out the new car. You haven't even raced me yet so I don't know why your in a hurry for me to come back. You run those lil pancars lol. I have bodies painted up and ready to cut out. I will have a car within the next three weeks or so depending on customs / my car budget. With my classes its work to get a 3.3gpa.
, I am an engineering student AND I am racing BIG cars. So lil cars aren't the number one priority. I will give you a ride in my street car and you might understand better lol. I am waiting on my T3 2011 to show up and then I will be out to race again this carpet season. I got spoiled in socal with nice tracks and high grip. Racing nitro with no grip is less fun. But I will be back for carpet season like last year You should get a rubber tire sedan and come play with the big kids lol. I was thinkin about goin to the TZ Grand Prix but I had no touring car. I usually get rid of my cars mid asphalt season and wait out the new car. You haven't even raced me yet so I don't know why your in a hurry for me to come back. You run those lil pancars lol. I have bodies painted up and ready to cut out. I will have a car within the next three weeks or so depending on customs / my car budget. With my classes its work to get a 3.3gpa.
See ya at the track.
10-14-2010, 12:46 PM
#454
Originally Posted by RC MARKET
Arrived !
10-14-2010, 03:33 PM
#455
no they will be shorter then the hillbilly link
10-14-2010, 03:54 PM
#456
the manual had said same STD L1 L2 post !
10-14-2010, 03:59 PM
#457
Originally Posted by RC MARKET
the manual had said same STD L1 L2 post !
10-14-2010, 04:36 PM
#458
Originally Posted by Skiddins
Do they come with a suitable ball joint?
XRAY # 302653 & 302654
10-15-2010, 03:49 PM
#459
Tech Apprentice
Just ran my T3'011 today at the Ardent Raceway in the UK,
The car was very promising. More front end flex also,
I would just watch out for the servo saver and servo arm and make sure there is a good clearance between them
Other than that the build was a treat =)
Stefan C - Xray UK
The car was very promising. More front end flex also,
I would just watch out for the servo saver and servo arm and make sure there is a good clearance between them
Other than that the build was a treat =)
Stefan C - Xray UK
10-15-2010, 11:06 PM
#460
Originally Posted by Stefan-Hpi Uk
Just ran my T3'011 today at the Ardent Raceway in the UK,
The car was very promising. More front end flex also,
I would just watch out for the servo saver and servo arm and make sure there is a good clearance between them
Other than that the build was a treat =)
Stefan C - Xray UK
The car was very promising. More front end flex also,
I would just watch out for the servo saver and servo arm and make sure there is a good clearance between them
Other than that the build was a treat =)
Stefan C - Xray UK
A few Questions. Is the space between the servo and motor the same as the old car? It looks a lot less from the pictures of other guys cars. Hope its not the case
Also, What Bump steer have you tried? Looking at the kit setup its 2mm, but pics from ETS suggest the guys arent using any, or 1mm.Thanks,
Antoni
10-16-2010, 12:03 AM
#461
Tech Adept
Originally Posted by Yokomo_Ant3
Hi Stefan,
A few Questions. Is the space between the servo and motor the same as the old car? It looks a lot less from the pictures of other guys cars. Hope its not the case Also, What Bump steer have you tried? Looking at the kit setup its 2mm, but pics from ETS suggest the guys arent using any, or 1mm.
Thanks,
Antoni
A few Questions. Is the space between the servo and motor the same as the old car? It looks a lot less from the pictures of other guys cars. Hope its not the case
Also, What Bump steer have you tried? Looking at the kit setup its 2mm, but pics from ETS suggest the guys arent using any, or 1mm.Thanks,
Antoni
check it HERE.
It's weird to me as well. The space looks smaller but it's actually not.
10-16-2010, 05:33 AM
#463
one more thing to share here, if you are using Tekin motor with light gearing (small pinion) you need to modified your upper deck to fit in the motor...
10-16-2010, 05:36 AM
#464
Tech Adept
Originally Posted by mjc168
the space is smaller, i can't fit in my receiver...
Why Xray would lie or fake a picture to show us it's the same as before ?
10-16-2010, 05:37 AM
#465
Originally Posted by Slideaway
No way?! Are you sure it's smaller ?
Why Xray would lie or fake a picture to show us it's the same as before ?
Why Xray would lie or fake a picture to show us it's the same as before ?
if you read the instruction manual 2011 spec page 30, there is a tach tips in order to fit in your equipment...
