R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Electric On-Road (https://www.rctech.net/forum/electric-road-2/)
-   -   Xray T3 2011 (https://www.rctech.net/forum/electric-road/435215-xray-t3-2011-a.html)

peter_robinson 02-16-2011 03:57 PM


Originally Posted by EAMotorsports (Post 8664099)
Wish I had known!! I had two DNF's due to broken pins. Ive since made my own pins and no issues at all!

EA

HA! Travis told me he gave some to you and Paul!

I know Korey told you how to make your own pins EA but if you want a much simpler solution... PM me your address.

-Pete

johnny55 02-16-2011 04:01 PM


Originally Posted by peter_robinson (Post 8664081)
Hey guys, some people have been PM'ing me about the ECS wraps. Here is a video that will be linked to our website once it's live. This gives you an idea of what the wraps do and how to install them.

Like I said the website is not live yet, so PM me if you are interested.

This material is phenomenal! Travis Schreven finished 2nd in the 17.5 expert main event at the 2011 Snowbirds Nationals on a broken ECS using RC-Trim ECS wraps!

enjoy!

+ YouTube Video
ERROR: If you can see this, then YouTube is down or you don't have Flash installed.

Nice vid. Can you please give us a link of the website to purchase? thanks.

peter_robinson 02-16-2011 04:02 PM


Originally Posted by johnny55 (Post 8664142)
Nice vid. Can you please give us a link of the website to purchase? thanks.

Like I said the website is not live yet.

For now you can PM me about them.

Or email me, [email protected]

EAMotorsports 02-16-2011 04:39 PM


Originally Posted by peter_robinson (Post 8664116)
HA! Travis told me he gave some to you and Paul!

I know Korey told you how to make your own pins EA but if you want a much simpler solution... PM me your address.

-Pete

Nope he didnt. He mentioned it once but I wasnt sure what he was talking about! I made pins last week but this would still keep them intact if the setscrews came out! What else are you making under the RC Trim name?

See ya in 6 weeks!

EA

peter_robinson 02-16-2011 05:04 PM


Originally Posted by EAMotorsports (Post 8664365)
Nope he didnt. He mentioned it once but I wasnt sure what he was talking about! I made pins last week but this would still keep them intact if the setscrews came out! What else are you making under the RC Trim name?

See ya in 6 weeks!

EA

You will just have to wait and see :sneaky:

I will tell you know though, they main reason I started the company is because I hate painting! If that gives you any idea

OVA 02-16-2011 05:24 PM


Originally Posted by peter_robinson (Post 8664081)
Hey guys, some people have been PM'ing me about the ECS wraps. Here is a video that will be linked to our website once it's live. This gives you an idea of what the wraps do and how to install them.

Like I said the website is not live yet, so PM me if you are interested.

This material is phenomenal! Travis Schreven finished 2nd in the 17.5 expert main event at the 2011 Snowbirds Nationals on a broken ECS using RC-Trim ECS wraps!

enjoy!

+ YouTube Video
ERROR: If you can see this, then YouTube is down or you don't have Flash installed.

Hey Peter
The tape you got ,I may have the same stuff you got,I brought them from the Fair ground 10 year ago,and still have them almost full rolled left... but it will hold anything together even hot water pressure hoses..you just waps them tight it is good to go...

dragont 02-16-2011 06:26 PM


Originally Posted by peter_robinson (Post 8664081)
Hey guys, some people have been PM'ing me about the ECS wraps. Here is a video that will be linked to our website once it's live. This gives you an idea of what the wraps do and how to install them.

Like I said the website is not live yet, so PM me if you are interested.

This material is phenomenal! Travis Schreven finished 2nd in the 17.5 expert main event at the 2011 Snowbirds Nationals on a broken ECS using RC-Trim ECS wraps!

enjoy!

+ YouTube Video
ERROR: If you can see this, then YouTube is down or you don't have Flash installed.

Nice vid. What I used to wrap with is the wire shrink wrap. I did a test run today and ran great. :nod::nod: No binding, what so ever.

RC MARKET 02-17-2011 07:31 AM

5 Attachment(s)
Xray Release some parts !
but unkmow New 308332 composite shock parts had which different ?

M-Technic 02-17-2011 08:01 AM


Originally Posted by RC MARKET (Post 8667587)
Xray Release some parts !
but unkmow New 308332 composite shock parts had which different ?

It looks like Xray is offering the shock caps with a pre-drilled hole to help build the shocks with 0 rebound.

RC MARKET 02-17-2011 08:51 AM


Originally Posted by M-Technic (Post 8667695)
It looks like Xray is offering the shock caps with a pre-drilled hole to help build the shocks with 0 rebound.

yes checked with a hole in shock cap

johnny55 02-17-2011 10:13 AM


Originally Posted by RC MARKET (Post 8667587)
Xray Release some parts !
but unkmow New 308332 composite shock parts had which different ?

Anyone know where to shop for the items today? Waiting sucks...

RC MARKET 02-17-2011 10:38 AM


Originally Posted by johnny55 (Post 8668278)
Anyone know where to shop for the items today? Waiting sucks...

rcmarket.com.hk

Dusttt 02-17-2011 12:44 PM

http://www.tommytape.com/industrial-products/

johnny55 02-17-2011 02:07 PM


Originally Posted by Dusttt (Post 8668912)

Hey thanks!! A whole roll of tape for $9.00. That's what I'm talking about!

Xpress 02-17-2011 06:09 PM


Originally Posted by johnny55 (Post 8668278)
Anyone know where to shop for the items today? Waiting sucks...

Waiting? For the shipping or for RCMarket to load? :D


All times are GMT -7. It is currently 09:13 PM.

Powered By: vBulletin v3.9.3.8
Copyright 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.