LloydLoar

iTrader: (20)

The stock axle/hubs for the R12C3.1 use a different offset such that the hubs mount to the middle of the wheel, roughly, rather than the 2 or 3 mm offset you see with other manufacturers. As such, you either need to use Yokomo wheels, or you need to swap out the axle. The 3mm offset hubs from IRS work great, or you can use the TOP axle and hub and be well under-width with plenty of room to work with.

190mph

iTrader: (12)

So offset as in towards the inside edge of the wheel?

So if you put the other wheels on this Yokomo with Yokomo axle they would stick out like the picture below when the kids on drugs do their real cars up? LOL

EDWARD2003

iTrader: (8)

Yes, IRS is a nice piece of kit. I highly recommend their products and you wont be disappointed.

I would also look into getting some Square RC mirror differential rings. They are not only a thing of beauty, the performance is second to none.

LloydLoar

iTrader: (20)

Yes, if you could mount other wheels on the yokomo hubs (you can't), the car would be really wide.

190mph

iTrader: (12)

So the bolt pattern or the middle hole diameter is different even?


Also this IRS company (Irrgang Racing Service) now sold to Hyperdrive, I don't see much detail on the internet about their stuff. Can anyone point me to a website that is good to buy the axle and hub set to work with other wheels and just a rundown of the parts list needed if you have experience? I don't want to rely on getting Yokomo wheels only when TQ and whoever else runs out of them for several weeks.

Its either the car for sale by xps800doo has or a new Xray X12 2016 spec car if I want to get into 1/12.

LloydLoar

iTrader: (20)

Yes.

Here is a link to the IRS axle/hubs you would want (in blue):

http://muddslidemotorsports.com/1graxkitwi3m2.html

The TOP axle and hubs will also work. Would need the following parts:

Rebel right hub
Rebel differential collar
Rebel left hub (v2)
Rebel rear axle
Top diff rings
Rebel differential nut

You can get those parts from TOP Racing USA at [email protected]

190mph

iTrader: (12)

Thanks for the info, I appreciate it.

xps800doo

iTrader: (7)

I always got tires from the-border.com, they are in the
Netherlands and can order direct from yokomo and corally who both have pre mounts. Usually took about 7-10 days for me to get them.


http://www.muddslidemotorsports.com/1graxkitwi3m2.html

EDWARD2003

iTrader: (8)

R12 up for sale

https://www.youtube.com/watch?v=YEyQlI6d5JQ

PM me or email me if your interested.

email is [email protected]

Splat!

Hi guys,
Looking for an R12. Prefer the newest, 3.1 car but open to all versions. Anyone selling?

PM me with any offers!

Thanks, Chuck

IgorR

The new one is on the way...

http://www.redrc.net/2016/03/yokomo-...r/#more-109923

The best news for me is the standard offset (looks like) for the rear rims.

JimmyMac

iTrader: (2)

Hmmmmm... Looks like I might have to get me one....

vafactor

iTrader: (6)

Me too.

bornox

iTrader: (31)

for r12c3 with team bomber conversion, can i use the irs kit?

EDWARD2003

iTrader: (8)

Are you talking about the Team Bomber rear pod? You can use the IRS axle unit on either the Yokomo C3 rear bulkheads or the Team Bomber bulkheads. You will need to use axle shims and "standard" wheels to complete this setup.