Losi XXX-S
#5372
R/C Tech Founder
Jeff, doesn't that make you 2 oz. under weight?
If so, you might be interested in something that KT Hobbies (I think) is producing: a steel belt cover for the bottom of the chassis. It will add some weight, at the lowest part of the car, dead center down the chassis.
If so, you might be interested in something that KT Hobbies (I think) is producing: a steel belt cover for the bottom of the chassis. It will add some weight, at the lowest part of the car, dead center down the chassis.
#5374
Regional Moderator
hey kraig,
will that come with a nifty color like the aluminum ones so the marshalls will be impressed when they flip my car back over?
will that come with a nifty color like the aluminum ones so the marshalls will be impressed when they flip my car back over?
#5375
Tech Fanatic
iTrader: (19)
Hello all. I finally got to race my XXXS for the first time and I am impresed. Compared to my TC3 I picked up about .2 to .4 of a second faster even with out the yellow belt, rear offset hubs and arms. My buddy has the whole works on his car (Basically a G+ with out the chassis mods) and he destroyed the track record held by a TC3 by a lap and a couple of seconds. All I have to say is that I like this car! Now all I need is a driver in a can and I will be set.
#5377
Tech Master
iTrader: (5)
Shane, yep, 2 ounces light! lol, I've never had a car this light (never had a car with $70 screws either). I was planning on puting all my weights inside the tunnel, just above the cover... but a steel cover would be pretty trick. Sounds like it's not a production part yet, but Kraig, if you're coming to the ROAR Nats, and possibly have some done by them, I'd be very very interested in getting one.
#5378
I noticed that many of the pros have white ball-ends on their Losi XXXS's. Does anyone know what brand they are? They are not RPM because they look too small.
#5379
Tech Adept
Matt Francis Motor Heatsink
Does anyone have a picture of one of these? I'm wanting to get a motor heatsink. The dynamite one looks good, but I am curious to find out if the Trinty MF one is bigger.
#5380
R/C Tech Founder
Originally posted by Kraig
Hey Shane, don't give away all of our prototype stuff.
Hey Shane, don't give away all of our prototype stuff.
Come on, I'm just hyping it for ya...
#5381
Leon, i have a matt francis heat sink and i dont use it because its heavy and it does NOTHING at all, waste of money !!
#5383
Originally posted by KlearKnight
I noticed that many of the pros have white ball-ends on their Losi XXXS's. Does anyone know what brand they are? They are not RPM because they look too small.
I noticed that many of the pros have white ball-ends on their Losi XXXS's. Does anyone know what brand they are? They are not RPM because they look too small.
#5384
KlearKnight - TSR6 is correct - the white ball cups are actually Losi stock, you cannot purchase them...
Kraig - you have mail!!
Wilde
Kraig - you have mail!!
Wilde
#5385
Super Moderator
iTrader: (81)
Shane, I know. We have to find the right thickness because right now they sit below the chassis. At least mine does.
We were able to get some Losi rear hubs back in stock. We are getting more arms later on this week. You guys are paying attention to when items are coming back in.
We were able to get some Losi rear hubs back in stock. We are getting more arms later on this week. You guys are paying attention to when items are coming back in.